dl used for sale

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 200 kg,

Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...

Turning diameter over bed: 600mm, turning length: 1000mm, spindle head: 8, spindle bore: 63mm, tailstock quill size: MK5, gap: yes, faceplate diameter: 500mm, machine dimensions X/Y: 2800mm/1100mm, weight: approx. 2200kg. Including quick-change tool holder Multifix C, faceplate and coolant device. The front guide of the machine is worn and the feed in the apron is blocked. The bed slides can be moved via the lead screw. Documentation available. An on-site inspection is possible.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Biscuit dosing machines Comas DLV 450 Year of Make: 2008 Condition: very good Siemens control system Working width: 450 mm

Brushes: 1100 mm, Power: 3 x 400V, 50Hz, 0.6kW, Water inlet: R3/4, 4 - 6 Bar, Water outlet: DN50, Dimensions: 2600 x 900 x 1300 mm, Weight: 120 kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement.

Finishing machine single-sided machining or double-sided machining, second-hand 3 FLAKKO units with 4 disc tools each: Drive power 7.5kW Spindle speed 300 - 2500 rpm Feed speed 2-20 m/min Wet machining Tool diameter 230mm Working width 400mm for single-sided machining Working width 200mm for double-sided machining with turning device Special magnetic inserts designed for hot machining IPC control with PLC Connected load 3x 400V 50Hz Connected load approx. 52 kW Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023. Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Specifications Manufacturer Siemens Model SGT-600DLE Year 2025 ( Complete overhaul ) Condition new Wattage 24,5 MW Hours 0 Frequency 50 Hz/ 60Hz Fuel Type Natural Gas Voltage 11000 KV Quantity N.1 Located EUROPE General Information - The turbine operates at 50Hz or 60hz . Timeframe for an additional power supply. - The turbine operates on natural gas - New core engine, 0 hours engine - Core engine is under warranty by Siemens - Low emissions and long maintenance intervals - Suitable for power generation and mechanical drives 2. Device specifications 1. Power output: 24,5 MW(e) 2. Fuel: Natural Gas. 3. Frequency: Dual 50/60Hz 4. Gross efficiency: 35.00% 5. Heat rate: 10,294 kJ/kWh (9,756 Btu/kWh) 6. Turbine speed: 9,500 rpm 7. Print ratio: 16.9:1 8. Exhaust mass flow: 40.0 kg/s (88.2 lb/s) 9. Exhaust gas temperature: 555°C (1,031° ...

Pressure Monitor KROM SCHRÖDER DL5K pmax 300 mbar 0.5 to 5 mbar Dimensions: 95 x 90 x 50 mm

Moisture meter with graphic display. Maximum capacity 160 g, division 0.001 g. Items sold in unverified status Items not subject to sales restrictions Auction-ID: A7-48361-34

Unused in the original packaging Saw blade diameter: 400 mm Auction-ID: A1-47951-69

Unused in the original packaging The UF Equipment DL400 Concrete Saw is a powerful and reliable ring saw, specially designed for cutting through concrete, asphalt, and other hard building materials. This professional concrete saw combines power, precision, and user-friendliness, making it the ideal choice for construction companies, contractors, and industrial use where heavy-duty cutting jobs are required. Extra protective caps and safety equipment. Transport wheels for easy movement around the workplace. Auction-ID: A1-47951-104

Air Operated Diaphragm Pump Type/s DL15-PM-TTT Technical data: - Connection Size Medium - 1/2\" BSPT Female Thread - Material housing - PP polypropylene - Middle part - PP polypropylene - Material diaphragm - PTFE - Material O-rings - PTFE - Material check valves -PTFE - Flow rate max. - 2.2 m³/ h - Medium pressure max. - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXD - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE membrane for the highest chemical demands, very good resistance against aggressive media and chemicals, temperature range: -5 °C – +130°C. PP polypropylene housing has high resistance to acids, inorganic acids and bases. Also available as electric conductive housing material available. Temperature range: 0°C – +60°C Auction-ID: A1-48483-54

Neat CompAir C25-10 professional mobile screw compressor in pallet version. This machine was built in 2022 and is equipped with a low-noise insulated housing. Ideal for construction sites, installation work, industry, blasting and driving pneumatic tools. The compressor has a clear control panel with pressure gauge, compressed air connections and service-friendly access to motor and compressor unit. Technical data Brand: CompAir Model: C25-10 Type: DLT0207 Year of construction: 2022 Air output: 2.3 m³/min Maximum working pressure: 10 bar Rated speed: 3,000 rpm Motor power: 18.9 kW CE marked Manufacturer: Gardner Denver Deutschland GmbH Facts Low-noise canopy Pallet version Compressed air connections Control panel with pressure gauge Easy to move with forklift Suitable for professional continuous use Additional dehumidifier Brand: CompAir (Gardner Denver) Model: C25-10 Type: DLT0207 Ma ...