dividing head used for sale

I am selling a panel sizing saw HOLZMA HPP380/38/38, built in 2008. Cutting surface 3800x3800mm. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5867mm x D.6637mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.0 optimization software included. Very good condition. Available the same.

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

rotary table, rotary indexing table, dividing apparatus, dividing head, dividing disk -Dividing disc: for rotary table/dividing apparatus 2 pieces -Outside: Ø 125 mm, -Inside: Ø 35 mm -Circle: 33/38/39/42/46 holes -Delivery/Price: complete -Dimensions: Ø 125 x 6 mm -Weight: 0.5 kg/piece

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Sensor, write head, read head, write-read head, read-labeling station -Manufacturer: Siemens, Moby-M reading and labeling station LBS-32 Ovp -Type: 6AW5454-8BH -Dimensions box: 150/40/H40 mm -Weight: 0.2 kg

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

Tumbler rivet head BODMER KÜSNACHTType FMK 3Year of construction approx. 1980Rivet shank diameter: max. 10 mmTool diameter: 12 mmRivet head stroke: 40 mmRivet spindle speed: approx. 1400 rpm. Motor power: 0.37 kWNeching connection: 380 volts, 50 Hz- rivet pressure adjustment via the hydraulic pressure infinitely variable- micrometer stop for stroke limitation- lifting movement via oil hydraulics (max. 45 bar)- machined flange surface 115 mm with fastening nut to the housingTotal length: approx. 800 mmWeight: approx. 40 kggood conditionThe rivet head has a

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

with 3-jaw lining Röhm - 200 mm - 15 pitch

Cylinder head Wichmann AX AXG AXAG

Deutz cylinder heads in exchange complete with new valves, seat rings+guides Head screws FL712/812 = Net 36,-/piece Head seal kit FL712/812 = Net 25,-/set all prices per piece plus. law.Tax.Price changes reserved. info@miw-zeven.de

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI

Reconditioned cylinder head

Cylinder head Exchange

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

Cylinder head recon E-start

Reconditioned cylinder head

Cylinder head Exchange

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Cylinder head complete with valves in exchange info@miw-zeven.de

Cylinder head Exchange

Cylinder head Exchange

Cylinder head Exchange

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Cylinder head Exchange

Reconditioned cylinder head

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

Cylinder head DEUTZ FL612 complete with valves in exchange available from stock all prices per piece plus vat, price changes reserved.

Reconditioned cylinder head not

Reconditioned cylinder head not

Cylinder heads in Exchange

we offer for MRI-use... Medrad MRI Dual-Head-Injector Typ: Spectris incl. TESTING FROM OEM Technican - Injector Head PEDESTAL unit - Head control unit - optical Transmitter/Receiver - Display control unit - Master control unit - Operation manual...englisch language - cable/etc. fully tested from OEM technican YOU ARE WELCOME TO INSPECT

Cylinder heads in Exchange

Cylinder head Exchange

Cylinder head Exchange

Cylinder head Exchange

We offer from stock Zeven: DEUTZ F6-8L 613 cylinder heads completely with valves + spring newly assembled. MIW GmbH Motoen-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven / Germany Phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.MIW-ZEVEN

in cassette

in cassette

In good condition

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

Apple Engineering Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Cylinder head, Bergen BRM Lower OD 430 mm, upper OD 420 mm Draw. no. 528/15-1 Reconditioned Part no: 403690 Part no: 528/15-1

From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...