We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,341 used machines on RESALE, but how to find them? Machine Search
used
Manufacturer : Fette Model: Perfecta 2000 Year : 1988 Type : Automatic tablet press Machine weight: 2200 kg Number of pressing stations : 36 Maximum compression force : 80 kN Maximum pre-compression force: 15 kN Maximum tablet diameter : 16 mm Maximum tablet thickness: 8.5 mm Maximum hourly output: 245,100 tablets Maximum filling height: 18 mm Divided circular scale diameter: 410 mm Die plate speed: 25-95 rpm Die diameter: 30.16 mm Die height: 22.22 mm Punch body diameter: 19 mm Punch length: 133.6 mm Punch insertion depth in die: 2 - 6 mm Overall footprint: 1212 x 1126 mm
used
Manufacturer : Confitrac sprl Model: CDS-161205 Year : 2017 Type: Deodoriser Condition: new, never used. Document : CDS-P&ID-Deo-500-Electrique.pdf Installation consisting of : - A horizontal cylindrical shallow bed deodoriser divided into two horizontal compartments, supported by two supports and offering the possibility to treat either 250 kg in one compartment or 500 kg in two compartments. - A horizontal buffer tank equipped with a product inlet/outlet, vacuum outlet and sight glass. Volume: +/- 460 litres. - 2 shell and tube heat exchangers - 1 electric heater - 2 electric heating resistances - Other equipment: control and dosing valves, flow meter, steam drying ramp, etc. - Electrical cabinet Materials: all parts in contact with the product are made of stainless steel 304L and 316L. Insulation: 100 mm rock wool. Documentation and drawings available. ...
used
Used Shrink Wrapper Krones Variopac FS70 Capacity 70 pulse min 4 200 pulse hour Package predisposed 0 5 lt PET 3 8 Package predisposed 0 5 lt PET 4 6 Package predisposed 0 5 lt PET x24 Tray predisposed but without tray storage Machine include divider unit wrapping machine and tray applicator oven with cooler fans Machine is in very good conditions packed ready for delivery [...for more information send your inquiry to the seller.] refno: FA29
used
Used Shrink Wrapper Dimac Star F45 PACKAGING MACHINE Constructeur DIMAC Model Star F45 n A40 1462 Year of construction 2004 Parcel speed per minute max 45 Type of film 40 or 50 microns film Tray presence no Type de fonctionnement Possibility of imprimed film travailler Machine inlet type right or 90 right Divider bottles yes Hours worked 16452 12 07 Last revision Spare parts yes PLC manufacturer and model B R Voltage 400 V 50 Hz Manuals available all Security protections yes Machines still in operation yes Availability November 2017 Currently processed formats 1 5l x 6 1l x 6 0 5l x 6 Dimensions encombrement machine 11 m x 1 35 m [...for more information send your inquiry to the seller.] refno: FA23
used
Dough dividing and moulding machine Bread press Fortuna Automat Gr. 4 H with effective shutdown Head cleaning with hand crank Partial head newly revised 30 pieces with stainless steel knife NEW Dough filler 1200 to 3300 g, Unit weight from 40 to 110 g with 3 new knitting plates E-system NEW DGUV V3 tested with rewind button Connection 400V, 16A-CEE plug Approx. dimensions: 710 x 730 x 1500 mm WxDxH Used machine overhauled with 6 months warranty More dough dividers in stock!
used
Dough dividing and warping machine, bread roll press Model: Optimat Size 3 Simple manual operation Range 30 to 90 grams/piece Dough filler 900 to 2800g Stand machine Dough dividing and warping machine Bread roll press with 3 knitting plates TAS System Floor-standing machine 30 pieces for round and square rolls Removable stainless steel dividing knife Approx. dimensions: 650 x 670 x 1490 mm WxDxH Connection 400 V, 1kW, 16A-CEE plug Used machine cleaned Many more dough dividers in stock!
used
Dough part and warp knitting machine Fortuna Bread roll press size 4 Semi-automatic 30-piece Dough filler 1200 to 3300g, Pieces from 40 to 110 g Dividing head with stainless steel knife NEW Dough divider with 3 new knitting plates New electrical system DGUV V3 tested Connection 400V, 16A-CEE plug Technology from a specialist company! Used machine overhauled with 6 months warranty Option: Stainless Steel Machinery Pedestal Only with us you will find the largest selection of dough dividers in stock!
used
Model: Liftomat for the transfer of dough divider into a RuLa movable on a frame Output approx.: 900 pcs/hour Connection 400V, 0.5 kW, 16A-CEE plug Used machine overhauled 6 months warranty With us you will find a large selection of bakery equipment!
used
Dough part and warp knitting machine Fortuna Bread roll press size 4 Semi-automatic 30-piece Dough filler 1200 to 3300g, Pieces from 40 to 110 g Dividing head with stainless steel knife NEW Dough divider with 3 new knitting plates New electrical system DGUV V3 tested Connection 400V, 16A-CEE plug Technology from a specialist company! Used machine overhauled with 6 months warranty Option: Stainless Steel Machinery Pedestal We have the largest selection of bun presses!
used
The machine is in good technical condition, after previous agreement the possibility of testing. CUTTING CONE SK 40 2 dividers in parallel on the work table , i.e. 4 controlled axes. X,Y,Z axes: 900X600X630 mm Max. spindle speed: 5000 1/ min. Control system: FANUC OM
used
Sharpening machine AVYAC C226 Tool holder divider Clamping: Manual with 6-jaw precision chuck Min. tool diameter: 2 mm max. tool diameter: 26 mm Maximum tool length: General: 600 mm Grinding wheel spindle ø of grinding wheels: 150 mm Wheel type: Vitrified, CBN or diamond Grinding wheel noses : Safety Spindle power: 0.75 kW Speed: 3000 rpm Dressing the grinding wheel Yes (single-point diamond) + side diamond for 15° chamfering Tool indexing By dial gauge (web half-thickness adjustment) Watering Built-in, 30 l/min pump Settings Draft angle: 0 to 10 2nd slope angle: 30 3rd slope angle: 50 4th slope angle: 90° to 100 Peak angle: 90° to 140°. Sharpening Solid carbide drill bits (cruciform with chamfer on cutting edge, 3-lip, etc.) High-speed steel (2-slope, 3-slope, crucifo ...
used
Used Bottling Line for ESL MILK up to 2500 bph We present a used bottling line engineered for maximum efficiency and reliability in packaging ESL milk Furthermore this line is optimized to ensure continuous and high quality production with a nominal capacity of 2500 bottles per hour bph Nominal Capacity and Configuration of the Bottling Line for ESL Milk The nominal capacity of 2500 bph arises from a precise arrangement of the main components Firstly the line includes 12 filling heads and 1 capping head ensuring a smooth and uniform flow during the bottling process Moreover it handles round PET bottles with a standard format of 1000 ml Product and Packaging Specifications This line is designed for round PET bottles with a standard format of 1000 ml It accommodates both pasteurized and ESL pasteurized milk ensuring maximum versatility in production Power Feeding and Distribution Features ...
used
Veneer press Joos Moulding press Pressing area 2500 x 1100 mm Pressing surface can be divided into three surfaces Pressing surface then approx. 3 x 650 mm x 1100 mm Aperture 550 mm Pressing pressure 2 kg/cm² Without heating plates With heatable mould
used
Description: Maximum power: 2200 W Rated power: 2000 W AVR: Yes Generator winding: copper Taken: 2 x230V – 2000W for one socket or 2000W divided into two sockets 1x 12V DC Engine power: 5 HP Engine type: OHV four-stroke Displacement: 2 08 cc Fuel type: PB petrol / 95 or 98 petrol Oil type: 10W40 or SAE30 Ignition: electronic Start: manual Fuel tank: 15 l Oil tank: 0.6 l Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm, weight approx.: 25 kg
used
Veneer press Wemhöner Moulding press Pressing surface 2600 x 1100 mm Aperture 1000 mm Upper surface can be divided into 4 faces, each 650 mm Pressing pressure maximum 4 kg/cm² Lower surface in 2 faces, each 1300 mm Bottom support with transport rollers Without heating plates
used
Description: Maximum power: 2200 W Rated power: 2000 W AVR: Yes Generator winding: copper Taken: 2 x230V – 2000W for one socket or 2000W divided into two sockets 1x 12V DC Engine power: 5 HP Engine type: OHV four-stroke Displacement: 2 08 cc Fuel type: PB petrol / 95 or 98 petrol Oil type: 10W40 or SAE30 Ignition: electronic Start: manual Fuel tank: 15 l Oil tank: 0.6 l Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm, weight approx.: 25 kg
used
Description: Maximum power: 2200 W Rated power: 2000 W AVR: Yes Generator winding: copper Taken: 2 x230V – 2000W for one socket or 2000W divided into two sockets 1x 12V DC Engine power: 5 HP Engine type: OHV four-stroke Displacement: 2 08 cc Fuel type: PB petrol / 95 or 98 petrol Oil type: 10W40 or SAE30 Ignition: electronic Start: manual Fuel tank: 15 l Oil tank: 0.6 l Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm, weight approx.: 25 kg
used
Description: Maximum power: 2200 W Rated power: 2000 W AVR: Yes Generator winding: copper Taken: 2 x230V – 2000W for one socket or 2000W divided into two sockets 1x 12V DC Engine power: 5 HP Engine type: OHV four-stroke Displacement: 2 08 cc Fuel type: PB petrol / 95 or 98 petrol Oil type: 10W40 or SAE30 Ignition: electronic Start: manual Fuel tank: 15 l Oil tank: 0.6 l Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm, weight approx.: 25 kg
used
Description: Maximum power: 2200 W Rated power: 2000 W AVR: Yes Generator winding: copper Taken: 2 x230V – 2000W for one socket or 2000W divided into two sockets 1x 12V DC Engine power: 5 HP Engine type: OHV four-stroke Displacement: 2 08 cc Fuel type: PB petrol / 95 or 98 petrol Oil type: 10W40 or SAE30 Ignition: electronic Start: manual Fuel tank: 15 l Oil tank: 0.6 l Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm, weight approx.: 25 kg
used
I - beam section - flat steel: 80 x 20 (d 1200) mm I-beam section - upend: 80 x 25 (d 2100) mm L-beam: 50 x 50 x 6 (d 1000) mm bar material - diameter: 40.0 (d 800) mm square material: 60x60x3 ( d 4000 ) mm rectangle: 80x30x3 ( d 6000 ) mm roll surface width: 177x60 (18x5 Nut) mm tool adaptor: 60.0 mm range L-W-H: 940 x 1260 x 1390 mm turning speeds: 6.4 m/min. bar material dia. max.: 70 x 2 (d 1600) mm total power requirement: 4.75 kW weight: 1080 kg range L-W-H: 950 x 1400 x 1450 mm Machine has been used very rarely in mint condition () current new price 14.500 euros Special price on request Furnishing: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment for extra small bending radii - Bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - Digital position display of the bottom/side rollers Display wi ...
used
Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 7.5kw Top 5.5kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min 4kw Feed Motor Cardan shaft driven drive Pneumatic material clamps divided into three sections Tables Groove Machines Entrance table with a length of 1980mm Memory system CE Certified
used
30 m shelf rack Schäfer R3000 incl. dividers Used goods, very good condition, see pictures Height 2.3 m Depth 50 cm Grid length 994 m Load capacity/compartment 100 kg Negotiation price: € 2.690,-- net from stock Offer consists of: + 31 pcs frame pre-assembled, approx. 2.3 m high, 50 cm deep +120 pcs. floors, 500 mm deep, 994 mm long, 100 kg load + 10 pcs cross bandages for 994mm floors +360 pcs dividers for 500 mm shelves Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
used
100 m shelf rack Schäfer R3000 incl. dividers Used goods, very good condition, see pictures Height 2.3 m Depth 50 cm Grid length 994 m Load capacity/compartment 100 kg Negotiation price: € 8,350,-- net from stock Offer consists of: + 101 pcs frame pre-assembled, approx. 2.3 m high, 50 cm deep + 400 floors, 500 mm deep, 994 mm long, 100 kg additional load + 30 cross bandages for 994mm floors +1200 pcs dividers for 500 mm shelves Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
used
Ilapak flowpacker, type: Carrera 500 PC, serial number: 04 193, year of construction: 10.04, 400 V, 50 Hz, 5000 W, plastic chain infeed belt with dividers, belt width: 80 mm, distance between dividers: 350 mm, divider height: 20 mm, seal width: 320 mm, plastic outfeed belt, belt width: 230 mm, total dimensions: 4250 mm x 1250 mm x 2000 mm. Lot located on Urk, the Netherlands. Viewing and pick-up in consultation with Industrial Auctions BV.
used
Newtec tray filling machine with 2 batch weighers, type: NBM50G, number: 10636, year of construction: 2012, 400 V, 3 Ph, 50 Hz, 0.6 MPa, dimensions trays: 185 mm x 135 mm x 45 mm, belt width: 200 mm, distance between dividers: 150 mm, divider height: 150 mm, total dimensions: 2300 mm x 2200 mm x 1550 mm.
used
Elevating belt, s/s frame, plastic belt with dividers, belt width: 435 mm, dividers width: 330 mm, dividers height: 100 mm, total dimensions: 1930 mm x 900 mm x 7000 mm.
used
Ilapak flowpacker, type: Carrera 2000 PC, serial number: 0862000562, year of construction: 05/2008, 400 V, 50 Hz, 7000 W, seal width: 320 mm, plastic outfeed belt, belt width: 230 mm, total dimensions: 3000 mm x 1250 mm x 2300 mm. With plastic chain infeed belt with dividers, belt width: 100 mm, distance between dividers: 270 mm, divider height: 40 mm, dimensions infeed belt: 4200 x 900 mm x 910 mm. Lot located on Urk, the Netherlands. Viewing and pick-up in consultation with Industrial Auctions BV.
used
Ilapak flowpacker, type: Carrera 2000 PC, serial number: 0362000593, year of construction: 02/2009, 400 V, 50 Hz, 7000 W, seal width: 250 mm, plastic outfeed belt, belt width: 230 mm, total dimensions: 3000 mm x 1250 mm x 2300 mm. With plastic chain infeed belt with dividers, belt width: 100 mm, distance between dividers: 270 mm, divider height: 40 mm, dimensions infeed belt: 5000 x 900 mm x 910 mm. Lot located on Urk, the Netherlands. Viewing and pick-up in consultation with Industrial Auctions BV.
used
Ulma flowpacker, model: Atlanta E-SP, machine number: 111287, year of construction: 2007, 380 V, 50 Hz, 12 A, 2.7 kW, plastic belt with dividers, belt width: 30 mm, distance between dividers: 260 mm, film width: 450 mm, seal width: 300 mm, plastic belts, belt width: 300 mm, total dimensions: 6000 mm x 1100 mm x 1660 mm.
used
Sormac roller peeler, model: CRP-12, serial number: 034045/010, year of construction: 2004, 400 V, 50 Hz, 12 A, 12 rollers, roller length: 2800 mm, s/s screw, diameter screw: 1100 mm tier: 430 mm, total dimensions peeler: 3600 mm x 1500 mm x 2200 mm. With s/s platform, dimensions: 3000 mm x 1500 mm x 2200 mm, switch cabinet, dimensions: 2000 mm x 1000 mm x 400 mm, infeed belt, plastic belt with dividers, belt width: 700 mm, distance between dividers: 260 mm, divider height: 50 mm, total dimensions belt: 4100 mm x 1100 mm x 850 mm and 2 funnels, dimensions funnels: 1850 mm x 1550 mm x 1000 mm and 2800 mm x 650 mm x 950 mm. Lot located on Urk, the Netherlands. Viewing and pick-up in consultation with Industrial Auctions BV.
used
Tramper traysealer, type: S-360, serial number: 011, year of construction: 2011, 400 V, plastic infeed belt with dividers, belt width: 30 mm, distance between dividers: 120 mm, dimensions dye: (3x) 210 mm x 130 mm, plastic outfeed belt, belt width: 420 mm, Witt Gasetechnik gas mixing station, type: KM100-2MEM, total dimensions: 6500 mm x 900 mm x 2700 mm. With 2 tool trolleys, dimensions dye: (4x) 170 mm x 130 mm, dimensions trolley: (2x) 1200 mm x 650 mm x 1830 mm.
used
Sealpac GmbH traysealer, type: Sealpac 500, serial number: TVG 02 1318 01, year of construction: 2005, 400/230 V, 3 Ph, belt width: 310 mm, traysealer dimensions: 3600 mm x 850 mm x 1850 mm, with infeed belt with dividers, distance between dividers: 100 mm, infeed belt dimensions: 5400 mm x 610 mm x 1680 mm, 2 trolleys for dyes, trolley dimensions: 960 mm x 720 mm x 1265 mm, including box with dyes, dyes dimensions: 190 mm x 250 mm, 150 mm x 200 mm, diameter dyes: 150 mm. Incomplete.
used
sheet thickness - max.: 1,5 mm Roller stands: 7 Profile height max.: - mm speed: 15 m/min total power requirement: 2,2 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1,5 x 0,6 x 1,15 m Electric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owners illness and retirement. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Christiaens Agro Systems transport belt with dividers, type: 2200 200, machine number: 150513003, year of construction: 2015, plastic belt with dividers, belt width: 195 mm, divider height: 50 mm, distance between dividers: 55 mm, total dimensions: 2150 mm x 800 mm x 1500 mm.
used
Used KHS Innofill Canning Line up to 24000 cph The Used KHS Innofill canning line 34000 cph represents an advanced solution for bottling operating at a speed of 24 000 cans per hour BPH This line is specifically designed for 0 33 L cans making it ideal for products like beer and soft drinks Furthermore it integrates various high quality components to ensure seamless operations Machinery Description The bottling line includes a wide range of high quality machinery First of all the depalletizer FIPAL MINIDEPAL 20 LA from 2015 ensures a continuous and automated supply of cans Moreover the heart of the line is the filling machine KHS Innofill Can DVD 40 from 2015 renowned for its precision and reliability in filling Additionally this machine contributes significantly to the overall efficiency of the line Sealing and Feeding Systems The seamer FERRUM F6 from 2014 ensures a hermetic seal of th ...
used
Description: Lot of divider screens 3 units Individual dimensions: 3000 x 500 x 2180 mm Dimensions of the screen: 3000 x 50 x 1870 mm With wheels for easy transport Diameter of wheels: 200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 2,180 mm, weight approx.: 120 kg
used
pressure: 170 t chamfer lenght: 3170 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 180 mm table height: 960 mm oil volume: 235 L 0: 300 bar controlled axis: 6 Anzahl Number of working hours: 29.400 h total power requirement: 16.5 KW weight of the machine ca.: 11910 kg range L-W-H: 4025 x 2020 x 2900 mm maintained condition () with only approx. 29.400 operating hours Furnishing: - electro-hydraulic CNC press brake - AMADA CNC control OPERATEUR 2 - 6 axes (X,Y1+Y2,R,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X-axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right ( ...
used
Description: tiltable divider table 4' - 100 mm 3 slotted holes delivered in original packaging unused ! Approx. Onsite Dimension. (l x w x h): 230 x 230 x 120 mm, weight approx.: 5 kg
used
Description: universal divider head for milling machine center height 160 mm MK4 spindle adaptor including self-centering 3 chuck 200 mm loose head set of gears fixed center MK4 distribution plate flame plate clamping plate Approx. Onsite Dimension. (l x w x h): 710 x 540 x 340 mm, weight approx.: 140 kg
used
Used Head Machine / Dough Divider FORTUNA, Type: KM 2 -In Bakery Condition- - Head machine KM 2 - in bakery condition - Technically tested and cleaned - Rows: 2 - Weight range: 25 - 85 g Inspection and test run are possible by arrangement.
used
Description: Packing table length approx. 11900 mm, working height approx. 850 mm, paper roll dispenser, lower drawer boxes with shelf dividers, without computer, printer and hand scanner Approx. Onsite Dimension. (l x w x h): 5,500 x 2,000 x 1,400 mm, weight approx.: 300 kg
used
Rühle dicer with infeed and outfeed belt, type dicer: SR3, number: 0082, year of construction: 2013, 400 V, 3 Ph, 50 Hz, 32 A, 17 kW, chamber: 120 mm x 120 mm, total dimensions: 1300 mm x 2200 mm x 2820 mm, including crate with grids, infeed elevating belt with dividers, plastic mesh belt, belt width: 500 mm, divider height: 100 mm, distance between dividers: 290 mm, elevating height: 2520 mm, total dimensions: 3300 mm x 1200 mm x 2620 mm, mobile frame for outfeed elevating belt, dimensions: 2700 mm x 750 mm x 1200 mm.
used
ZFM cooking vessel for dumplings with infeed and outfeed belt, type: LDP-400, number: 9/LDP400/2015, year of construction: 12/2015, 3x 400 V, 50 Hz, 2.7 kW, fuel: gas, dimensions: 2400 mm x 1450 mm x 1750 mm, infeed belt, s/s frame, plastic belt, belt width: 300 mm, total dimensions: 1200 mm x 600 mm x 1000 mm, outfeed elevating belt with dividers and sprayers, belt width: 700 mm, distance between dividers: 200 mm, divider height: 70 mm, elevating height: 1550 mm, total dimensions: 1800 mm x 1000 mm x 1780 mm.
used
pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...
used
Description: CNC FANUC 31IA5 4 axes Lehmann divider EA510 21-tool turret BT30 spindle Spindle speed 10000 rpm Travel 700X400X330 mm Chip evacuator weight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 2,000 x 2,235 mm
used
Description: travels: X-axis: 7280 mm Y-axis: 525 mm Z-axis: 380 mm spindle power: 7 kW , spindle taper: HSK-40E , max. spindle speed: 24000 rpm max. workpiece length: 7300 mm toolchanger positions: 8 power consumption: 23 kW  , further information , 4 axes continuous 8 pneumatic vices 2 operator workstations work table can be divided into 2 work areas the machine can work on the left-hand surface while the operator can work on the right-hand surface  , please also have a look at the PDF document of this machine z-motion: 380 mm, x-motion: 7,280 mm, y-motion: 525 mm, taper: HSK-40E, toolchanger positions: 8, power capacity - spindle: 7 kW, turning speed range: 24,000 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 2,400 x 2,000 mm
used
Description: TABLE - Table dimensions: 610 x 315 mm - Weight allowed on the table : 500 kg SPINDLE - Spindle speed : 8000 rpm - Spindle taper : BT 30 AXES - Axis strokes : X=290 - Y=255 - Z=260 mm - Rapid travers rates : X=40 - Y=40 - Z=40 m / min TOOL STORE - Tool changer: 16 tools Equipped with : - 1 CN FANUC O-Mate - 1 Divider 4 axis NIKKEN + tailstock - 1 Chip conveyor Stock N° : 7257 weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,300 x 2,100 mm
used
Description: TABLE - Dimensions of the table: 1092 x 502 mm - Weight allowed on the table: 400 kg SPINDLE - Spindle speed: 15000 rpm - Spindle power: 17 kw - Spindle taper: BT 40 AXES - Axis strokes : X=860 - Y=540 - Z=770 mm - Rapid travers rates : X=30 - Y=30 - Z=24 m/min TOOL STORE - Tool changer: 24 tools - Maximum tool weight: 7 kg - Maximum tool length: 300 mm Equipped with : - 1 CN FANUC Series Oi-MF - 1 Tilting milling head - 1 CNC divider + tailstock - 1 tool measurer - 1 Watering in the center - 1 Lubrification pump tank Stock number: 7467 weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 5,680 x 3,000 x 2,750 mm
used
Description: SPINDLE - Spindle speed : 20,000 rpm - Spindle taper : BT 40 AXIS - Axis strokes : X=800 - Y=510 - Z=510 mm - Rapid travers rates : X=42 - Y=42 - Z=42 m/min - Maximum distance between the table and the spindle nose: 660 mm TABLE - Table dimensions : 1320 x 600 mm TOOL STORE - Tool changer : 60 tools - Tool change time : 3 seconds Equipped with : - 1 CN MORI SEIKI MSG 502 - 1 Divider 5 axis NIKKEN - 1 hp pump - Watering in the center - 1 Chip conveyor number of operating hours: 17 169 h Stock N° : 7342 weight approx.: 7,900 kg, Approx. Onsite Dimension. (l x w x h): 6,600 x 2,700 x 3,000 mm
used
Overview This complete filling line for single-use glass was delivered in 2019. Commissioning was stopped in Q1 2020, and resumed in Q4 2021. The line has been running 2/3 days per week since Q4 2021. The line can do 20 variations of bottles including 300ml, 330ml, 500ml, 568ml & 650ml. Components Depalletiser | Emmeti | MT565 | 2016 Siemens Simatic controls, Harford control panel. Bottle outfeed conveyor, plastic chain-link 1400 mm x 9.6 m with tapered outfeed on stainless steel supports. Krones Glideliner Accumulator with tapered outfeed, 850 mm to 350 mm wide Empty bottle inspector | Krones | Linatronic | 2003 60,000 bottles per hour Throughfeed stainless steel slat chain conveyor Height adjustable legs complete with dust canopy. Left to right orientation Filling block for glass | Krones | 2003 rebuilt 2018, installed 2019 Capacity: 50.000 bottles/h at 0,33 l long-neck glass bottle ...