We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,321 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
pressure: 50.0 t chamfer lenght: 1275 mm distance between columns: 1040 mm column arm: 410 mm table width: 100 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec stroke: 215 mm tiltable up to: +/- 10 mm table height: 1050 mm dayligth: 385 mm oil volume: 80.0 L travel -x axis: 500 X-Weg mm traversing speed: 300 R-Weg mm compressed air: 6.0 bar Number of working hours: 24.000 h control: DELEM total power requirement: 8.0 KVA weight of the machine ca.: 4750 kg. range L-W-H: 2000 x 2000 x 2380 mm Machine with only approx. 24.000 operating hours () all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled hei ...
used
sheet width: 3190 mm plate thickness: 6 mm distance between columns: 3250 mm cutting angle: 1,2 ° no. of strokes: 32-75 Hub/min column arm: 100 mm back stop - adjustable: 5-1000 mm table height: 800 mm oil volume: 150 l total power requirement: 15 kW weight of the machine ca.: 6200 kg dimensions of the machine ca.: 3500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2550 mm plate thickness: 6,00 mm distance between columns: mm down holder: 14 total power requirement: 15 kW weight of the machine ca.: ca. 5-6 t dimensions of the machine ca.: 2,80 x 2,20 x 1,85 m • Motorized adjustable back gauge with display up to 700 mm • Angle stop • 2 support arms • Cutting length limitation • Stroke counter • Cutting gap adjustment • Control cabinet renewed in 2021 • Second set of knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm bending angle: 135 ° upper beam stroke: 350 mm engine output: 4 kW total power requirement: kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,20 X 1,60 X 0,90 m - with different OW rails, especially segmented tools - Footswitch - Manual operation Machine is repaired, checked, cleaned by a specialist and is then complete functioning. Test run is carried out. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3000 mm plate thickness: 6,00 mm distance between columns: mm opening of the upper cheek: 450 mm opening of the down cheek: 125 mm Opening of the bending cheek: 125 mm total power requirement: kW weight of the machine ca.: 7,00 t dimensions of the machine ca.: m - Renewed control cabinet with Siemens control - controlled back gauge 1000 mm - Crowning adjustment - Support table with wheels - various bending rails including sharp rail - segmented goats foot - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2040 mm plate thickness: 3,0 mm daylight opening: mm distance between columns: 2100 mm work height max.: mm : max. 135 Grad total power requirement: 4,0 kW weight of the machine ca.: 2,2 t range L-W-H: 23,1 x 1,0 x 1,7 m Furnishing: - Bending angle preselection - Segmented tool - additional bending set - manual backgauge - Dokumentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 2000 mm plate thickness: 4,0 mm distance between columns: 2050 mm roll diameter: 160 mm total power requirement: KW weight of the machine ca.: 2,75 t dimensions of the machine ca.: 3,6 x 1,2 x 1,3 mm Sheet metal bending machine 3 rollers incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2.040 mm plate thickness: 3,0 mm distance between columns: 2.210 mm back stop - adjustable: 540 mm voltage: 400 V weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,50 x 2,10 x 1,25 m Motorized Plate Shear - foot switch - Adjustable backgauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: FIDIA C20 table-size: 5000x2000 mm T-slots: 11 T-slot - width: 22 mm table weight: 30000 Kg distance between columns: 2800 mm feed:: x-20000 mm/min feed: y,z-30000 mm/min spindle rate: 6000 rpm : 32 kW taper ISO: ISO 50 Tools changer: 30 fach/tools internal coolant system feed: 20 bar handwheel: weight of the machine ca.: 65 t dimensions of the machine ca.: 15.100x6.200x6.250 mm -Automatic head UAD II -Tool clamping Hydraulic -Head 2 – Vertical mandril INCLUDED -2 longitudinal chip conveyors -1 cross chip conveyor -Laser tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 250 mm quantity of oil: 300 l frequency: 50 Hz : 63 A voltage: 3 x 400 V total power requirement: 21,5 kW weight of the machine ca.: 11260 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 320 t chamfer lenght: 4080 mm distance between columns: 3680 mm throat: 410 mm ajustment speed: 150 mm/sec return speed: 135 mm/sec bending speed: 10 mm/sec height of stroke: 365 mm dayligth: 535 mm total power requirement: kW weight of the machine ca.: ca. 24 t dimensions of the machine ca.: 4,65 x 2,31 x 3,10 m • 2D graphics control Delem DA • pneumatic matrices displacement • 2 movable support arms • Hydraulic tool clamping at the top and bottom • CNC controlled crowning • controlled axes: Y1, Y2, X, R1, R2, Z1, Z2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 1040 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,750 t dimensions of the machine ca.: m Manual back gauge can be operated from the front up to 500 mm Side stop Knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3200 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 3,80 t dimensions of the machine ca.: m Segmented upper beam rail Manual and automatic bending mode possible Bending angle adjustment via potentiometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t chamfer lenght: 3200 mm distance between columns: 2500 mm Control: E21 stroke - max.: 320 mm stroke: 120 mm throat: 250 mm back stop - adjustable: 500 mm total power requirement: 5,5 kW weight of the machine ca.: 4,0 t dimensions of the machine ca.: LBH 3,20 x 1,30 x 2,21 m including upper tool including die Bending capacity steel: 2.5 mm to 3,200 mm Machine may not comply with current UVV guidelines We expressly point out that we assume no responsibility for this Machine is sold as is The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1° 30 no. of strokes: 15 Hub/min control: ENC 100 table width: 500 mm throat: 50.0 mm Number of working hours: 912 h total power requirement: 15.0 KW weight: 7650 kg range L-W-H: 3810 x 2200 x 2050 mm from a maintenance workshop () very good / well-maintained condition (as new) with only 912 operating hours current new price ~ 45.000 euros Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear with DURMA ENC 100M control manual cutting gap adjustment Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA ENC 1 ...
used
pressure: 220 t chamfer lenght: 4050 mm distance between columns: 3550 mm throat: 450 mm stroke: 350 mm dayligth: 600 mm ajustment speed: 140 mm/sec bending speed: 10 mm/sec return speed: 130 mm/sec total power requirement: 22 kW weight of the machine ca.: 12 t - upper tool, divided 4050 mm (new) - block tool 4050 mm: V16, V50, V20, V35 (new) - Pneumatic tool clamping above - CNC controlled crowning - controlled axes: Y1, Y2, X, X1, R, Z1, Z2 - Support arms movable on linear guide and height adjustable - Fiessler photocell - Stmer ESA S560 Touch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 210 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 490 mm throat: 350 mm stroke: 215 mm working feed: 9,8 mm/sec return speed: 80 mm/sec ajustment speed: 130 mm/sec work height max.: 845 mm Control: DELEM DA 69 total power requirement: 15 kW weight of the machine ca.: 15 kg dimensions of the machine ca.: 3880 x 1675 x 3880 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2540 mm plate thickness: 2.50 mm distance between columns: 2600 mm daylight opening: OW 300 mm adjustment: UW 115 mm pivoting angle: 180 Grad work height max.: 910 mm back stop - adjustable: bis 690 mm voltage: 400 V total power requirement: 3.8 kW weight: 2250 kg range L-W-H: 3640 x 1750 x 1600 mm maintained condition () Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer infinitely adjustable with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back Adjustment range up to max. ~ 690 mm - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/date ...
used
x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t dimensions of the machine ca.: - m Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 300 t chamfer lenght: 4100 mm distance between columns: 3550 mm Machine No.: 5083 weight of the machine ca.: 24.000 kg New controller: DNC 884sPS Domestic equipments: - CNC controlled X & R axis - CNC controlled crowning - hydraulic stamp clamping - Fiessler safety light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 1530 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,840 t dimensions of the machine ca.: 1,90 x 1,30 x 1,20 m - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 1020 mm plate thickness: 3,00 mm distance between columns: mm stroke: 120 mm total power requirement: kW weight of the machine ca.: 1,010 t dimensions of the machine ca.: 1,97 x 1,20 x 1,20 m • Sharpening rail • Bending rails 10 mm, 25 mm • Goats foot splint H 50 mm, length 745 mm. segmented • Manual backgauge • POS 400 control • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
NICOLAS CORREA FP-50/60 bridge milling machine used Table dimensions: 6000 x 2000 mm Max weight on table: 30,000 kgs X axis travel: 6,000 mm Y Axis Travel: 3,250 mm Z Axis Travel: 1,000 mm Distance between columns: 2,700 mm Head model: Automatic 2,5º-2,5º Cone: ISO-50 Spindle speed: 3,000 r.p.m. Spindle power: 37 kw Work feeds: 2-7,000 mm / min Rapid feeds: 7,200-12,000 mm / min Machine weight: 61,500 kgs Machine dimensions: 15765x5225x4870 mm Equipped with: Control: SELCA 3045 (Optional HEIDENHAIN 640) ATC tool magazine: 30 tools Internal cooling: High pressure pump - 25 bars Suction system: Yes Perimeter fairing: Yes
used
CORREA FP-40/40S bridge milling machine Table dimensions: 4140 x 1500 mm Maximum weight on table: 10.000 kgs X-axis traverse: 4000 mm Y-axis traverse: 2500 mm Z-axis traverse: 1000 mm Distance between columns: 2300 mm Pick-up of heads: Yes Huron universal head: 5000 rpm Direct head out: 5000 rpm Spindle taper: ISO-50 Spindle power: 30 kw Feedrate: 7 m/min Rapid traverse (X): 15 m/min Rapid traverse (Y, Z): 12 m/min Approx machine weight: 33.000 kgs Machine dimensions: 10926x3440x4845 mm Year: 2004 Equipped with: Control: HEIDENHAIN iTNC-530 Electronic Handwheel: HR-410 Coolant supply: in the electrical cabinet
used
CORREA FP-40/40 bridge milling machine Table dimensions: 4000 x 1250 mm Maximum weight on table: 10.000 kgs X-axis traverse: 3500 mm Y-axis traverse: 2500 mm Z-axis traverse: 1000 mm Distance between columns: 2040 mm Huron head: 3000 rpm Spindle taper: ISO-50 Spindle power: 30 kw Rapid traverse (X): 15 m/min Rapid traverse (Y, Z): 12 m/min Approx machine weight: 24.200 kgs Machine dimensions: 7300x2880x3400 mm Equipped with: Control: Fidia M2 Several tools
used
Pressing force: 80 Tn Working length: 3190 mm Distance between columns: 2660 mm Max travel: 200 Mm Gap: 400 Mm Backgauge travel: 600 Mm Approach speed: 100 Mm/sec Bending speech: 10 Mm/sec Return speed: 150 Mm/sec Motor power: 10 CV Approx machine weight: 8000 Kgs Machine dimensions: 3435x2175x2885 mm Equipped with: Numerical Control: CIBELEC 70 (3 axes) Arms in the backgauge: 5
used
SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage
used
SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m
used
DEMAG Ergotech compact 1500/610 Order: NC4 Closing force: 150 T - 1500 KN Distance between columns: 500 x 500 mm Tray dimensions: 790 x 790 mm Min / max mold thickness: 250 - 560 mm Injectable volume: 323 cm3 Material pressure: 1973 bars Screw diameter: 45 mm L/D ratio: 20 Weight: 6700 kg Dimensions: 5.20 x 2.10 x 1.50 m
used
SANDRETTO series 7 1960/350 Clamping force: 350 T - 3500 KN Distance between columns: 600 x 600 mm Dimensions of the trays: 910 x 910 mm Minimum/maxi thickness of the mold: 200 - 650 mm Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Weight: 14,500 kg Mounted mixing screw + std screw + one-piece screw
used
SANDRETTO series 7 177/60 Clamping force: 60 T - 600 KN Distance between columns: 301 X 301 mm Tray dimensions: 455 X 455 mm Min/max mold thickness: 80-350 mm Volume injected: 125 cm3 Material pressure: 1408 bar Screw diameter: 40 mm Heating power: 6KW Weight: 2900 kg
used
SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max mold thickness: 250 - 850 mm Opening stroke: 830 mm Injection volume: 1768 cm3 Material pressure: 1500 bars Screw diameter: 80 mm - 4 hydraulic cores - 1 blow gun - 2 8-way water boxes - Socket panel (4 three-phase, 1 neutral, 1 earth at the rear + 1 three-phase, 1 neutral and 1 earth at the front) Total power of the machine: 85 KW L/D ratio: 20 Weight: 21,500 kg Dimensions: 8.71 x 2.65 x 2.14m
used
BMB 1000 T injection press Reference: 7500/100 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars Injectable volume: 4650 cm3 Injectable weight (PS): 4400 g Injection speed: 2350 cm3 / sec Dimensions of the trays: 1660 x 1560 mm Distance between columns: 1110 x 1010 mm Machine weight: 62,000 kg
used
sheet width: 1030 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,80 t dimensions of the machine ca.: m Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table: 5500x2000 mm Maximum weight on table: 25000 Kgs X-axis traverse: 5000 mm Y-axis traverse: 3300 mm Z-axis traverse: 1500 mm Distance between columns: 2700 mm Heads: HURON manual Direct output (5000 rpm) Spindle taper: ISO 50 Speed range: 125-2000 rpm Spindle power: 42 kw Feedrate: 2-6000 mm/min Rapid feedrates /quill: 7200 / 5000 mm/min Approx machine weight: 60.000 kgs Machine dimensions: 12700x5420x4700 mm Year: 1993 (Retrofit 2015) Equipped with: Control: FAGOR 8065 double control Electronic doble handwheel: FAGOR Electrospindle head: FAEMAT (24000 rpm)
used
Table dimensions: 4500x1250 mm Maximum weight on table: 10.000 kgs X-axis traverse: 4000 mm Y-axis traverse: 2500 mm Z-axis traverse: 1200 mm Distance between columns: 2040 mm Heads: Automatic UAG 2.5º (3000 rpm) Direct output (5000 rpm) Spindle taper: ISO-50 Speed range: 5000 rpm Clamping: hydraulic Spindle power: 30 kw Feedrate: 2-7500 mm/min Rapid traverse (X-Y,Z): 15000 m/min - 12000 mm/min Approx machine weight: 30.500 kgs Machine dimensions: 10975x4170x4645 mm Year: 2000 (Retrofit 2016) Equipped with: Control: HEIDENHAIN TNC-426 Electronic handwheel: HR-410 Chip conveyor: 2 Tool changer: ATC 30 Coolant supply: through the spindle Renishaw probe: Tool measuring Preparation for piece probe: Yes
used
Table dimensions: 4500x2000 mm Number of T-slots: 15 T-slots measures: 22 mm Max weight on table: 15000 kgs X-axis traverse: 4500 mm Y-axis traverse: 3000 mm Z-axis traverse: 1500 mm Distance between columns: 2500 mm Milling head model: Automatic UAD 0.02º Spindle taper: ISO-50 Clamping system: Hydraulic Speed range: 6000 rpm Spindle power: 37 kw Maximum torque: 1298 Nm Feedrate: 0-1000 mm/s2 Rapid traverses: 0-25000 mm/min Machine weight: 58.500 kgs Machine dimensions: 13250x6200x6500 mm Year: 2019 Equipped with: Doble control: HEIDENHAIN TNC 640 Double wireless electronic steering wheel: HRA-551 Chip conveyors: 2 HYPATIA static changer: 10 tools GRUNDFOS internal and external cooling Tool measurement probe: Renishaw RMP60 Measuring probe: Renishaw RTS Splash guard: Yes Advanced PLC: CORREA
used
pressure: 200 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 200 mm ajustment speed: 100 mm/sec working feed: 8,0 mm/sec return speed: 120 mm/sec stroke: 190 mm table height: 900 mm dayligth: 350 mm engine output: 15,0 kW oil volume: 150 ltr. Control: ELGO weight of the machine ca.: 13500 kg. range L-W-H: 4800 x 1750 x 2800 mm Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display digital position display for backgauge (X axis) digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/fo ...
used
Krauss Maffei KM 300 – 1900 C2 injection molding machine Year of manufacture -2000 Control : MC4 Closing unit Clamping force: 3000 kN Mold opening force, max.: 160 kN Sliding force of the moving plate Opening: 86 kN Sliding force of the moving plate Closing: 68 kN Mold plate size (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Min. mold height: 330 mm mold height: 1150 mm Hydraulic ejector - stroke: 200 mm Forward/reverse ejection force: 58/28 kN injection unit Screw diameter: 70mm Ls/D ratio: 20 Injection pressure: 1778 bar Displacement: 1047 cc Shot weight, PS: 953 g Injection speed: 400cc/sec Screw speed: 218 1/min Plasticizing capacity max.: 75 g/s Nozzle pressure: 110 kN Electrical and hydraulic equipment Pump motor nominal capacity: 55 kW Installed heating power: 30 kW Adjustable barrel heating zo ...
used
Krauss Maffei KM 320 – 2700 C3 injection molding machine Year of manufacture -2003 Control : MC4 Technical data Closing unit Clamping force: 3200 kN Size of mold plates: 1240 mm x 1240 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 769 mm Mold height min.: 120 mm Hydraulic ejector - stroke: 251 mm injection unit – Screw diameter: mm 70 – Ls/D ratio: – 23 – Injection pressure: bar 2389 – Injection volume: cm3 1097 – Injection weight: g 998 – Injection efficiency: cm3/s 393 – Number of screw revolutions: 1/min 272 – Plasticizing efficiency 1): g/s 83/108option – Nozzle pressure force: kN 129 Electrical and hydraulic equipment Adjustable hot runner zones: 20 Hydraulic cores: 2 pcs Euromap connector 12 Hydraulic cylinder tip valve Electric scooping motor Air valves 2 pcs
used
Two twin machines available Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a return lock and an open nozzle. Closing system: Clamping force: 5000 kN Mold opening force, max.: 280 kN Movable pressure plate Sliding force Opening: 137 kN Movable pressure plate Sliding force Closing: 116 kN Mold plate size (hxv): 1270mm x 1200mm Distance between columns (hxv): 900 mm x 800 mm Mold opening stroke: 1170 mm Min. mold height: 480 mm Maximum opening path: 1650 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejection force: 92548 kN injection unit Screw diameter: 90 mm Injection pressure: 1742 bar Injection volume : 1953 cm³ Injection weight, PS: 1777 gr Injection rate: 649cc/sec Screw spee ...
used
Wittmann/Battenfeld Makro Power E 450/2250 injection molding machine Year of production: 2013 Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum mold mounting height: 330mm Maximum mold mounting height: 780mm Screw diameter: 65mm Specific injection pressure: 2070 bar Maximum injection weight: 980.9g ServoPower S1 package (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with a jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity consumption costs and supports precise regulation of the injection process) Electric ejector with a force of 60 KN and a path of 180 mm Additional equipment: 1. Air valve 2. Cooling water flow regulator 3. Digital interface to the temperature controller (possibility to control six thermor ...
used
Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...
used
sheet width: 605 mm plate thickness: 1.50 mm distance between columns: 605 mm back stop - adjustable: 300 mm table width: 605 mm operating pressure: max 6.0 bar work height max.: 1025 mm work table:: 605 x 250 weight of the machine ca.: 268 kg dimensions of the machine ca.: 1200 x 950 x 1300 mm Furnishing: - pneumatically driven sheet metal shears - manual backgauge - Pneumatic pressure gauge - 2x side table stops including mm scale - 1x movable table stop - Piece counter - mechanical sheet metal hold-down device - Machine light - freely movable foot switch Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325334 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10 mm Number of working hours: 26.937 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 16.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3640 x 2210 x 2885 mm maintained condition () - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled ...
used
sheet width: 2540 mm plate thickness: 3,0 mm distance between columns: 2500 mm back stop - adjustable: 1000 mm upper clamping bar adjustment: 350 mm total power requirement: 4,62 kW dimensions: 3800 x 2300 x 1750 mm weight of the machine ca.: 3050 kg - lateral protective wall - 1x dual free-moving footswitch - 1x free moving footswitch - Electrically controlled back gauge with rear sheet metal support surface - with ball rollers - incl. new hydraulic pump (value approx. 4000€) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3050 mm plate thickness: 16 mm distance between columns: 3050 mm : 15-1000 mm cutting angle adjustment: ja ° cutting gap adjustment: ja mm connected load: 30 kW weight of the machine ca.: 14,.5 t dimensions of the machine ca.: 4,0 x 4,0 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is in good technical condition, inspection possible upon agreement. Specifications: Max. bending length 4300 mm Distance between columns 3700 mm Max. pressing force 300 T Dis. Beam - Table 485 mm Beam stroke 300 mm. Dimensions (Estimate) Length 5200 mm Width 2200 mm Height 3600 mm Weight 21500 kg
used
pressure: 1200 kN chamfer lenght: 3110 mm distance between columns: 2690 mm dayligth: 347 mm tiltable up to: +/- 3 Grad throat: 420 mm table width: 100 mm work height max.: 1000 mm rapid traverse y-axis: 200 mm/min speed: working cycle y-axis: 10 mm/s return travel y-axis: 180 mm/s x-axis: 500 mm/s r-axis: 200 mm/s z-axis: 1000 mm/s 0: y-axis: +/- 0,01 mm x-axis: +/- 0,05 mm r-axis: +/- 0,01 mm movement: y-axis: 200 mm x-axis: 600 mm r-axis: 340 mm Control: total power requirement: 18,5 kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3,60 x 1,75 x 2,33 m control: 2D-colour-graphic control DELEM T 3000 inclusive tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.