We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,553 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: table capacity 15 kg , .axle strokes: X axis 400 mm , Y axis 425 mm , Z axis 400 mm , 4th axis 0-100° 5°axis 360° z-motion: 400 mm, x-motion: 400 mm, y-motion: 425 mm, control: FANUC Series 15-M, pallet table size: 200 mm, numbers of pallets: 40, taper: ISO40, toolchanger positions: 100, weight approx.: 8,400 kg, Approx. Onsite Dimension. (l x w x h): 6,100 x 3,330 x 2,800 mm
used
Description: Serial number 162331 Including one additional 4-jaw chuck, one tailstock and clamping device weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm
used
Description: maximum loading capacity 14 kg maximum range 1,100 mm arm weight: 32.6 kg. control box: 13.8 kg. rated voltage 100 V-240 V frequency 50/60 Hz, phase 1 full-load current 16A short circuit rating 300 A with 2 gripper arms SCHUNK and integrated camera system plus all safety functions max speed: 1.1 m/ repeat accuracy +/- 0.1 mm. 6 degrees of freedom 6 rotation axes. with integrated color camera for AI Functions incl. remote control and PC with robot software licence installed Note: the robot can also be adjusted manually. The robot was used with no payload in the Showroom. Aprox. 500 h of joint moving time. More details see PDF (1-12 collaborative_robots_datasheet_en.pdf) Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 2,200 mm, weight approx.: 120 kg
used
Control: Sinumetrik 840D sl, operating hours: 41528h, spindle running time: 25436h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Coolant preparation: Knoll.
used
Traversal X/Y/Z: 670/820/600mm, swivel range: +/- 120°, tool storage: 120 places. Table load: 1,200kg, spindle speed: 18.00 n/m, rotary table: Ø 800mm, endless 360 degree rotation. Tool holder: HSK 63, Max. Weight tools: 8kg, Pneumatic: 6bar, Control: Heidenhain TNC 640. Machine hours: 12,400h, Spindle running time: 2,340h, Options available: IKZ variable, variety of HSK fixtures as good as new. Dimensions length/width/height: 4150mm/5000mm/3500mm, weight: 20 tons
used
Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places.
used
With accessories, documentation and Bar Loader FMV turbo ET 420, available in the third quarter of 2023.
used
Length: 2580mm, width: 2115mm, height: 1780mm, weight: 2.6t, with accessories, documentation and Bar Loader FMB turbo ET 420, there is another identical machine available as a source for spare parts.
used
Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation.
used
Control: Sinumetrik 840D sl, operating hours: 41634h, spindle running time: 19155h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Chip conveyor: KNOLL 800 K-1, cooling lubricant preparation, cooling unit: Lahntechnik LM 220-32.
used
A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding Machine. Modernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant pump. Installation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE). Detailed information about the modernization on request. With filter system and CO2 extinguishing system (Dangelmaier). On-site inspection is possible.
used
Including accessories, cutting head, welding head 150mm, setting master for cutting head and welding head, communication interface external periphery, automatic front door with servo motor, support frame, the right side door has an opening for pipe processing, this must be closed with a sheet of metal on both sides, battery from the PC must be replaced, the software must be reset for normal operation, with Laser Trumpf TruDisk 3302, laser power: 3300W, connected load: 20kVA, weight: 850kg and Cooling Device KLH RL 16/0 SK IEC.
used
weight approx.: 1 kg, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm
used
Description: Machine no.: 15175181714 3rd + 4th axis B - axis +/- 100° C - axis nx 360° Integrated rotary table Clamping surface rotary axis ø 750mm Centering bore ø 30H6 T ool cooling IKZ Operating hours Spindle hours 6860.84 hrs. Machine hours 19178.97 hrs. Chip conveyor Dimension 5890x1030x1550 mm Scraper belt width 510 mm Weight 770 kg Belt filter system Dimension 1700x1400x1850 Filling volume 600l weight 550kg Measuring system via fiber optics and motor measuring system including DECKEL MAHO 3D quickSET Exchange Display and keyboard 2022 Tool changer/ gripper 2022 For further technical data, please take a look at the PDF and watch the video to the machine. Attention ! ,The fixed collection date for this item can only be individually communicated by the logistics department after the end of the auction and beginning of the disman ...
used
equipped with tool change magazine; including 1 KNOLL filter installation, including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm) type: KF 150/500 and chip discharge conveyor
used
A voltage unit of Fein is offered Fine No. 26609: Type ETB F great 220 Volt Power 2500 VA second20 Volt 11.4A Special price
used
Transformatoren Technik Jahnsmüller TU6/90M Pri:115/230V 82/41A Sec:230V 39.1A Weight: 49.5kg
used
Linearantrieb G.A.S., Gesellschaft für Antriebs- und Steuerungstechnik mbH KA 50 HUB 200 ( KA50HUB200 ) 302502 stroke: 200 mm used, tested ! Dimensions: 315 x 160 x 95 mm
used
Power Distribution Panel SIEMENS NV30/250-FG NV10A ( NV30/250-FGNV10A ) FG 8694 ( FG8694 ) 3800 : V 250 A with load racing switch, 3 surge arresters 6 main fuses and 15 shunt fuses voltmeter with voltage control switch New ! Dimensions: 920 x 620 x 330 mm
used
Mobile isolation transformer, solid rubber distributor, on chassis ELSPRO series NÜRNBERG 3680002/K Power: 4000 VA Primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / 30 V 1AC Secondary voltage: 230 V 1AC 16 A 50 - 60 Hz IP54 with thermal circuit breaker: 16 A Cable length: approx. 2.3 m New ! Dimensions: 620 x 460 x 1120 mm
used
Tilting table, clamping table PAGUS Clamping surface: 200 x 200 mm 60° Tiltable 3 grooves Groove width: 14 / 24 mm Dimensions: 245 x 205 x 110 mm
used
Pneumatic cylinder DESTACO K 3000 - 200 - 6 stroke: 200 mm rod diameter Ø 65 mm Dimensions: 540 x 130 x 130 mm
used
Pneumatic cylinder FESTO DNGU-32-200-PPV-A S3 158098 stroke: 200 mm rod diameter Ø 12 mm Dimensions: 345 x 95 x 50 mm
used
Pneumatic cylinder NORGREN PRA/182125/W2/250 stroke: 250 mm rod diameter: Ø 32 mm pmax: 16 bar used, tested ! Dimensions: 710 x 225 x 160 mm
used
Pneumatic cylinder FESTO DNC-100-200-PPV-A 163472 stroke: 200 mm rod diameter: Ø 35 mm pmax: 12 bar used, tested ! Dimensions: 580 x 115 x 160 mm
used
Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 Piston Ø 125 mm stroke 200 mm rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm
used
Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 200 - 3 - 200 - NR 630 A Diameter: Ø 63 mm Length: 200 mm New ! Dimensions: 260 x 70 x 70 mm
used
3-jaw chuck, three-jaw chuck, lathe chuck WMW, ROTO RECORD DH 200 x 3 - III TGL30 2332 Outer Ø: 200 mm Centering Ø: 155 mm bolt circle Ø (chuck) : 174 mm bore Ø: 54 mm height with jaws: 106 mm including feed wrench used, tested ! dimensions ( lathe chuck ): 200 x 200 x 106 mm
used
4-jaw chuck, four-jaw chuck, lathe chuck WMW, NILES DH - A - 200 x 4 TGL30 2332 outer Ø: 200 mm centering Ø: 155 mm bolt circle Ø (chuck) : 174 mm bore Ø: 54 mm height with jaws: 104 mm including feed wrench used, tested ! Dimensions ( lathe chuck ): 200 x 200 x 104 mm
used
Centering vice, centric clamp PAGUS jaw width: 200 mm jaw height: 50 mm wingspan: 0...200 mm on turntable with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm
used
Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRÄZISIONSWERK 501 x 250 x 250 mm Quality 2 all slotted holes Ø 31 x 71 mm 2 chambers 225 x 220 x 235 mm used, tested ! Dimensions: 501 x 250 x 250 mm
used
Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRÄZISIONSWERK 1005 x 250 x 250 mm Quality 2 all slotted holes Ø 42 x 80 mm 3 chambers 310 x 220 x 235 mm used, tested ! Dimensions: 1005 x 250 x 250 mm
used
Clamping box, clamping cube, clamping angle, box angle PAGUS 1010 x 250 x 250 mm all slotted holes Ø 40 x 79 mm 3 chambers 345 / 225 / 350 x 220 x 235 mm used, tested ! Dimensions: 1010 x 250 x 250 mm
used
Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRÄZISIONSWERK 1500 x 250 x 250 mm all slotted holes Ø 41 x 80 mm 4 chambers 355 x 220 x 235 mm used, tested ! Dimensions: 1500 x 250 x 250 mm
used
Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck RÖHM KFD-200/3HS 143888 outer diameter: Ø 200 mm Height without jaws: 110 mm Passage: Ø 66 mm Speed: max. 6500 rpm Flange diameter: Ø 200 / 170 mm bolt circle diameter: Ø 134 mm 3x screw M12 x 1.75 jaws individually adjustable by toothing ! with accessories ! New ! Dimensions ( lathe chuck ): 200 x 200 x 110 mm Dimensions ( packaging ): 230 x 230 x 240 mm
used
Pneumatic cylinder, standard cylinder, double-acting FESTO DNU-63-250-PPV-A 14162 stroke: 250 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1,12 5, Length 33 mm pmax: 12 bar New ! Dimensions: 445 x 80 x 80 mm
used
Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N25-200-B stroke: 200 mm Piston diameter: Ø 25 mm Rod diameter: Ø 10 mm Rod thread: M10 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm New ! Dimensions: 340 x 30 x 30 mm
used
Pneumatic cylinders, variant cylinders, round cylinders, double-acting FESTO DSNU-25-250-PPV-A 19252 stroke: 250 mm piston diameter: Ø 25 mm rod diameter: Ø 10 mm rod thread: M10 x 1,25, length: 20 mm pmax: 10 bar mounting thread: M22 x 1.5, Length: 20 mm Mounting socket: Ø 8 mm, Length: 16 mm New ! Dimensions: 390 x 27 x 27 mm
used
Pneumatic cylinders, variant cylinders, round cylinders, double-acting FESTO DSNU-20-250-PPV-A 19243 < br />stroke: 250 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, length: 20 mm pmax: 10 bar mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm New ! Dimensions: 385 x 27 x 27 mm
used
Pneumatic cylinder, standard cylinder, double-acting FESTO DSBC-40-200-PPVA-N3 1376663 stroke: 200 mm piston diameter: Ø 40 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, length: 22 mm pmax: 12 bar used, checked! Dimensions: 363 x 54 x 54 mm
used
pneumatic cylinder, standard cylinder, double-acting FESTO DSBC-40-200-PPVA-N3 1376663 stroke: 200 mm piston diameter: Ø 40 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm pmax: 12 bar New ! Dimensions: 363 x 54 x 54 mm
used
Pneumatic cylinders, standard cylinders, double-acting AIRTEC, PNEUMATIKATLAS XL40/250 ISO 15552 stroke: 250 mm piston diameter: ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1.25, length: 20 mm pmax: 10 bar New ! Dimensions: 413 x 54 x 54 mm
used
Pneumatic cylinders, standard cylinders, flat cylinders FESTO DZH-25-290-PPV-A 150293 stroke: 290 mm rod diameter Ø 10 mm New ! Dimensions: 430 x 45 x 25 mm
used
Connector REXROTH MECHMAN Series QR1 Standard 9 x T-connector, hose diameter: Ø 4 mm 212 110 400 0 24 x T-connector, hose diameter: Ø 4 mm 212 110 600 0 34 x straight plug-in connection, reduce, hose diameter: Ø 8 / 4 mm 212 170 806 0 fitting set consists of - 67 connectors ! New ! Dimensions: 160 x 160 x 60 mm
used
Belt cylinder NORGREN M/146025/M/200 stroke 200 mm piston diameter Ø 25 mm 1 - 8 bar Carriage: 130 x 32 mm used, tested ! Dimensions: 400 x 75 x 65 mm
used
Maintenance unit, three-part PPT PNEUMATICS, PRVA PETOLETKA RA1 251M FA1 252M ZA1 251M < br /> 229 - 25400 / 24400 / 26400 0 - 10 bar NW 25 Connection thread: M33 x 2 New ! Dimensions: 380 x 360 x 180 mm
used
Pneumatic cylinders, standard cylinders, double-acting FESTO DNC-63-200-PPV-A SA1318278A 2025368642 / 40 B9088 stroke: 200 mm rod diameter Ø 20 mm pmax.: 12 bar used, tested ! Dimensions: 400 x 75 x 125 mm
used
pneumatic cylinder, standard cylinder, double-acting FESTO DNC-63-250-PPV-A 163409 stroke: 250 mm Rod diameter Ø 20 mm pmax.: 10 bar with pivot used, tested ! Dimensions: 510 x 140 x 130 mm
used
Hydraulic test press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment burned by measuring probe and limit switch) greatest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm
used
Radiator with blower, cooling fan, oil cooler EMMEGI, EBM Cooler : 220 x 220 x 60 mm Fan wheel: Ø 200 mm Fan: EBM Type A2D200-AH18-01 68 / 70 W ( 50 / 60 Hz ) 2600 / 2900 rpm ( 50 / 60 Hz ) 230 / 400 V 3AC 50 / 60 Hz used, tested ! Dimensions: 430 x 210 x 300 mm