display 2 axis used for sale

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Handover: in the current state as viewed -Use: as a spare part stock -Hydraulic unit: from Gruse lifting table ELT 1.5-10-1 -Motor: HPI 2.3 kW/2750 rpm -Hydraulic pump: HPI A5087577 -Price: per piece -Number: 2 pieces -Dimensions: 550/700/H180 mm -Weight: 39 kg

Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, Electric motor type: 200L-02 -Power: 30 kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection rating: IP55 -Number: 3x motors available -Price: per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/unit

DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Bauer type: DK94V10/216 -Manufacturer: Gearbox Bauer -Motor power: 0.75 kW -Speed range: 30 to 210 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 20 mm -Dimensions: 450/320/H485 mm -Weight: 64 kg

adjustable gear motor, variable speed gear motor, electric motor -Adjustment is missing -Transfer in current condition as seen -Manufacturer Motor Bauer type: DK94V10/216 -Manufacturer: Gearbox Bauer -Motor power: 0.75 kW -Speed range: 30 to 210 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 20 mm -Dimensions: 400/258/H475 mm -Weight: 58 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: VEB, Column jib crane, lifting capacity 250 kg -Base plate: 440 x 440 mm -Projection: 1,800 mm -Total height: 2,700 mm -Hook height: 2,490 mm -Chain hoist: VEB Type 250F -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Transport dimensions: 2530/800/H440 mm -Weight: 272 kg

Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Renfroe, sheet metal gripper lifting clamp type MPC2 -Clamping range: 30-60 mm -Load capacity: 2000 kg -Dimensions: 400/300/120 mm -Weight: 9.3 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection -Manufacturer: Siemens, Simatic S7 connection ET 200M -Type: 6ES7 153-2AA02-OXBO -Dimensions: 115/40/H125 mm -Weight: 0.3 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from Rapid RVT 2500 electric forklift -Hydraulic pump: Hidroirma type UP100K163-01 -Motor: Efel 36808 24 V -with: tank and control valve -Dimensions: 210/170/H360 mm -Weight: 10.5 kg

Bending machine, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. working width: 2000 mm -Max. sheet thickness: 2 mm -Connected load: 2.2 kW -Dimensions: Bending machine 2850/1100/H1400 mm / Unit 720/540/H760 mm -Total weight: 2160 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Konecranes, crane chassis -Beam width: up to 242 mm -Load capacity: 2000 kg -Dimensions: see technical drawing in the photos -Dimensions: 335/300/H255mm -Weight: 19 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Transformer, single phase power transformer, single phase transformer, single phase isolation transformer, single phase isolation transformer, isolation transformer, solid rubber distributor -Manufacturer: ismet, single-phase isolation transformer type KSTK 2500 -Power: 2500 VA -Technical data: see photo nameplate -Dimensions: 315/270/H275 mm -Weight: 29 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Sonnenschein charger dryfit TL 24V 260-300 Ah -Input voltage: 220 V -Power: 24 V / Battery capacity 260-300 Ah -Quantity: 1x charger included -Dimensions: 600/410/H450 mm -Weight: 40 kg

Electric motor, three-phase motor -Condition: Electric motor is unused -Manufacturer: Weg, electric motor type W22 250S/M-02 -Power: 55 kW -Speed: 2970 rpm -Shaft: Ø 60 x 140 mm -Design: B3 -Protection class: IP 55 -Number: 5 electric motors available -Price: per piece -Dimensions: 960/510/H640 mm -Weight: 559 kg

electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 280S/M-02 -Power: 90 kW -Speed: 2970 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 55 -Quantity: 1 electric motor available Price: per piece -Dimensions: 1070/560/H745 mm -Weight: 692 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo -Speed: 2820 rpm -Power: 0.55 kW -Protection class: IP 54 -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2200 rpm -Fan wheel: Ø 140 x 65 mm -Connection input: Ø 120 mm -Connection output: 90 x 90 mm -Dimensions: 300/290/H250mm -Weight: 6.2 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2830 rpm -technical data: see photo type plate -Fan wheel: Ø 200 x 70 mm -Connection input: Ø 68 mm -Connection output: Ø 50 mm -Dimensions: 295/250/H320mm -Weight: 9.1 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: MA-VIB, fan blower radial fan type OS.120.201.4 -Engine power: kW -Speed: 2950 rpm -Volume output: /min -Fan wheel: Ø 120 x 30 mm -Connection input: Ø 135 mm -Connection output: 80 x 55 mm -Dimensions: 210/190/H200 mm -Weight: 3.1 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3115-2LA29 -Power: 50 Hz 5.0 kW 2910 rpm / 100 Hz 8.0 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 80 mm -Dimensions: 545/280/H225 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3116-2AA29 -Power: 50 Hz 7.5 kW 2920 rpm / 100 Hz 11.5 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 80 mm -Dimensions: 630/280/H195 mm -Weight: 70 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3115-2AA99 Z -Power: 50 Hz 5.5 kW 2925 rpm / 100 Hz 9.5 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 550/280/H235 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3107-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5860 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 630/220/H280 mm -Weight: 50 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm -Dimensions: 665/233/H235 mm -Weight: 48 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA20 Z -Power: 50 Hz 1.25 kW 2880 rpm / 100 Hz 2.0 kW 5885 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 200 x 3.2 mm -Dimensions: 390/300/H220 mm -Weight: 36 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3115-2AA99 -Power: 50 Hz 4.0 kW 2890 rpm / 100 Hz 6.4 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 550/280/H195 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA99 -Power: 50 Hz 1.6 kW 2845 rpm / 100 Hz 2.8 kW 5790 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 190 mm -Dimensions: 395/210/H200 mm -Weight: 25 kg

gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Bonfiglioli, gear motor -Gearbox: Type 200220031 MVF 27/F 210 rpm -Engine: Type BN 27C 4 -Power: 0.09 kW -Design: B14 angle -Shaft: Ø 9 x 28 mm -Protection class: IP 55 -Dimensions: 263/150/H110 mm -Weight: 3.5 kg

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: GSL, pressure gauge with measuring hose -Type: 0 to 250 bar -Screw connection: see photos -Number: 30x manometers with measuring hose available -Price: per piece / from 2 pieces 40,- €/piece. -Transport dimensions: Ø 68 x 200 mm -Weight: 0.3 kg/piece

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132 S/2AB -Power: 9.2 kW -Speed: 2900 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 450/256/H325 mm -Weight: 66 kg/piece

Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low-pressure switch, pressure measuring device with contact device -Manufacturer: WIKA, pressure gauge with contact device 0 - 250 bar, unused, original packaging -Manometer: Type 212.20.160 Kont 821.1 -Connection: G1/G2 -Quantity: 1x pressure gauge available -Cardboard dimensions: 240/240/H190 mm -Weight: 1.5 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

The GALDI RG 260 Gable Top Filling Machine is designed for filling and sealing gable top cartons, typically used for packaging beverages, dairy products, and other liquid goods. Here are some key features and descriptions of this machine:, - High Efficiency: The RG 260 is known for its high filling speed, accommodating large production runs efficiently., - Versatility: This machine is compatible with various gable top carton sizes and can handle different types of liquids including juices, milk, and soups., - Precision Filling: Equipped with advanced filling technology, the RG 260 ensures accurate and consistent filling, reducing product waste., - Automatic Operation: The machine generally operates automatically, allowing for minimal manual intervention, which enhances productivity., - Sanitary Design: Designed to meet hygiene standards, the RG 260 is constructed with materials that are  ...

M.T.A. ARIES G 075 HE, Green R454B refrigerant, 227 kW effective output, Water IN/OUT 13°/7°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, Green R454B refrigerant, Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750, 4 condensers consisting of copper tubes and aluminium fins, NOT microchannels, Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit as option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 227 kW cooling capacity, conditions: new machine, type: chilling unit

BIG SUN Swivel dump bucket 240 cm with Merlo ZM2 mount, - Net weight: approx. 351 kg, - Volume: 1.01 m3

SML heavy-duty dump bucket 240cm with Merlo ZM2 mount, - Net weight: approx. 443 kg, - Volume: 1.56 m3

Spiral mixer BOKU, type: SK 240 A There are 2 engines and 12 tank cars available - Kettle suitable for a maximum of 240 kg of dough - back from the bakery - Machines were in use until recently Visits and test runs are possible by arrangement.

Very good condition. Filterelements should be replaced.

ALL PURPOSE 2-SHAFT HEAVY DUTY, HYDRAULIC SHREDDER 1.600 mm.220 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.600 mm long shafts Shredding chamber :1.600 x 1.700 mm, Hydraulic motors 2 x 110 kw, planetary gearboxes, inverter for reverse movement on pre-settable threshold, n.11 knives, 60 mm.thick, 4 hooks (or bespoke to project), Electrical control sy ...

Spiral mixer with extendable tank wagon DIOSNA, type: SP 200 AF -In bakery condition- - Digital control - for 200 kg of dough and 125 kg of flour - El. Connection: 400 V, 50 Hz, 12.7 kW, 33 A - Several tank cars available There are 4 machines available. Inspection and test run possible.

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

GEA Sour Cream Thermization Line, Capacity: 1,500–2,000 l/h, Year: 2013, Installed & Connected – Excellent Overall Condition, Complete GEA Process Line, We are offering a complete GEA Sour Cream Thermization Line originally designed for the, thermal treatment of sour cream and fermented cream products., The line was installed in 2013 and remains installed and connected on site. It is available for, inspection and can be offered complete with associated process equipment, automation,, and technical documentation., The system was supplied as a complete GEA process line and includes a buffer tank,, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and, fully automated process control., Main Application, Originally designed for:, • Sour Cream, • Fermented Cream (25% fat), Potential Applications, • Kefir, • Cultured Buttermilk, • Drinkin ...

GOOD CONDITION INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM.

CONDITION MOTOR DAMAGED NEED TO CHANGE INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. GREATGLOVE(THAILAND) CO.,LTD 180/3 MOO 7, SRISONTHON, THALANG,PHUKET 83110 Ms.Supawadee Kumpone, Manager Procurement, F6 email: supawadeegreatglove.com Tel : +6693-7478585 Office : +6676-620190 Ext : 194 Ms.Wilawan Sakulsongboonsisri, DGM Finance,F6 Tel : +6689-1969222 Office : +6676-620190 Ext : 111

ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...

Process plant for the production of nut butters,, consisting of:, Product feed container (stands on platform),, 2 Lico mills with 2 Börger product pumps,, 2 collecting containers with lids for the puree,, 2 control cabinets for the 2 mills,, chiller, 6 x product tanks with a capacity of approx. 760 kg nut butter) and control cabinet,, Each tank can be controlled individually., Settings: speed of the agitator, stirring interval (x min on, x min off)