display 2 axis used for sale

Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good

Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good

under current Details on request

Table size X 5300 Y 1300 mm 800 mm wide waste outfeed conveyor 2 CNC Z axes Drilling head with 21 vertical drill spindles and 4x2 horizontal drill spindles with integrated grooving saw rotatable through 90° Extraction shoe for the vertical drill spindles and chip & dust extraction of the horizontal spindles integrated in the drilling head 10 kW main spindle, vector-controlled a 3600 C axis, fully interpolating

FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°

Laser Prima Industrie mod. Platinum 1530 Year 2008 CNC Primach P20L Working hours about 25.000 Visible running.

Robot 6-axis ABB IRB 140 Year of construction: 2005 Control: IRC5

6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo controller, frequency converter, drive controller for robots FANUC type A06B-6105-H0003 No. V07Z08282 Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axle outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Built-in PCBs: A16B-2000-0063/07D A16B-3200-0440/05C - Plexiglas cover not included Dimensions W x H x D 70 x 170 x 380 mm Weight 16.5 kg As good as new / unused in the opened original carton from stock dissolution; used

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

Timing belt axle FESTO EGC-120-1154-TB-KF-0H-GK 556815 Working stroke: 1154 mm Carriage: 200 x 68 mm Flange (drive): 100 x 100 mm suitable drive motor - see GM892 ! used, checked ! Dimensions: 1600 x 175 x 115 mm

Timing belt axis linear module INA MDKUVE 15-500 3 ZR AL 05-858-526 Working stroke: 1 490 mm carriage: 500 x 176 mm flange (drive): 115 x 115 mm shaft: Ø 28 mm used, tested ! Dimensions: 2210 x 28 x 130 mm

CAN axis motor -Type: PSE 4225 DP-M -Dimensions: 175/115/H65 mm -Weight: 2 kg

Crawler axle, crawler chassis, mini excavator, chain excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -Clamping cylinder

Matsuura MX-520 5 axis machining center 20.000 rpm Machine is in excellent condition X : 630 mm Y : 560 mm Z : 510 mm

X : 750 mm Y : 600 mm Z : 520 mm 12000 rpm Control unit : Heidenhain Renishow tool and part measuring Coolant through spindle Axis measurement scales Number of spindle hours : 9400 Machine is in excellent condition

Haas UMC 750SS 5 axis machining center Machine is like new Magnetic table(never used) Tools re included(value is around 25.000 USD)

X: 3 400 mm Y: 1 350 mm Z: 760 mm Fanuc control uni Machine will be available July 2022 Spare spindle

DMG Deckel Maho HSC 20 Linear 5 axis machining center Machine has been recently serviced Machine is in very good condition

Deckel Maho DMC75 V Linear 5 axis simultaneous vertical machining center HEÄ°DENHAÄ°N Ä°TNC 530 control unit Kinematic calibration Laser probe X 885 Y 600 Z 600 B-110 B+10 C 360

20-axis machining center with automatic loading of up to 9 bars and unloading on the warehouse. Mobile fifth wheel with 8 spindles, vertical blade, horizontal blade, auxiliary cutters on head for head and tail machining.

X : 1220 mm Y : 850 mm Z : 610 mm Control unit : Siemens 840 Machine is in good condition

Hermle C 40 U Dynamic 5 axis machining center X : 850 mm Y : 700 mm Z : 500 mm A: 115º C: 360º 10000 rpm

Kitamura Mycenter 3Xi 3 axis vertical machinine center Fanuc control unit X : 760 mm Y : 455 mm Z : 460 mm Table size : 409 mm x 900 mm No chip conveyor

DMG Mori CMX 70 U 5 axis Machining Center Machine has been installed December 2019! Multimaster spindle

Mori Seiki VS100 CNC Vertical Machining Center 4 axis Table dimensions : 2250 mm x 1000 mm X : 2050 mm Y : 1000 mm Z: 700 mm Max weight on table : 3000 Kg

Manufacturer Deckel Maho Model DMC 75 V Linear Year 2005 Located in Turkey Machine is in good condition

SEASKA S-600 5-axis machining center. Year 2004 Axis X 660,0 Axis Y 400,0 Axis Z 510,0

just done maintenance 10 inches X-axis Turning length : 650 mm Turning diameter : 300 mm

DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition

Takisawa TS-3000 YS 5 axis cnc lathe Machine is in excellent condition

Mazak Integrex 400Y 5 axis cnc lathe 12 inch chuck Turning length : 1500 mm Capto C6 holder Conveyor Machine can be seen in working condition

Double turret Double spindle Spindle speed : 5000 rpm Number of axis : 8 Tool capacity : 12 + 12 Spindle motor power : 22 Kw Fanuc control unit

Bending length: 3000 mm 135 Ton Number of axis : 9 (Y1,Y2,X,R,Z1,Z2,XZ,V,W) ​Wila Tool holder system Machine is in very good condition

Spinner TC400 52MC C axis CNC Lathe Siemens control unit 8 inches Machine is in good working condition

DMG Mori CMX 70 U 5 axis machining center Spindle has been replaced with new one recently Probe X : 750 mm Y : 600 mm Z : 520 mm Machine is in excellent condition

Microcut 3 axis vertical machining center Max spindle speed : 12.000 rpm Machine is like new condition Linear slide system

Deckel Maho DMC 75 V Linear 5 axis machining center Simultaneous 5 axis Control Unit : HEİDENHAİN İTNC 530 Kinematic calibration Laser Prob X : 885 mm Y : 600 mm Z : 600 mm 30 magazine Table diameter : Ø 750 Turning diameter : 950 mm

Takisawa NEX-108Y CNC Lathe Y and C axis 11/7.5 Kw spindle engine Takisawa A2-6 4000 rpm spindle Chip conveyor Maximum turning length : 431,5 mm Turning diameter : 260 mm Fanuc control unit Machine is like new

3-axis forward-reverse counter, digital display HEIDENHAIN VRZ 653 B ( VRZ653W ) 205 120 02 115 / 220 V AC 0.4 / 0.2 A for front panel installation: 260 x 200 mm New ! Dimensions: 280 x 155 x 210 mm Dimensions ( packaging ): 350 x 260 x 340 mm

DMG CMX 50 U 5 axis machining center X : 500 mm Y : 450 mm Z : 400 mm Machine is in good working condition

Spinner U-630 5 axis machining center X axis : 630 mm Y axis : 530 mm Z axis : 465 mm 3+2 axis Number of magazine : 32 Siemens control unit Renishaw laser measuring 40 bar through spindle coolant Filtration system

Manufacturer Stama Model MC 734/M Year 2005 Price includes training for one day by the operators on site

Axile G8 5 axis machining center Machine is like new condition 48 ATC 20000 rpm X: 670 mm Y: 820 mm Z: 600 mm

SFY HA-5AX7B 5 axis vertical machining center HEIDENHAIN Control unit 18000 rpm speed 800x550x600 Fully simultaneous simultane

Huron EX10C 5-axis machining center Year 2001 Coolant 60 Bar Vibration sensor Blum laser probe x y z 1200 x 700 x 800mm

5-axis machining center Manufacturer: Deckel Maho Model: DMU 70 V

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1.500 x 1.250 mm. Max weight allowed on table 4.000 kg. Table turning range (C Axis) 0.001 º (Continuo) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Horizontal / Vertical Auto Indexing Head (A Axis) 0,001 º (Continuo) Rapid Traverse 60.000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18.000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precisi ...