128,877 used machines on RESALE, but how to find them? Machine Search
Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation
Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Comment To operate only with appropriate backing pump and control. Shipping time: On request; ready for operation
Roots pump booster pump Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.; ready for operation
Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Bindler & Schneider Type: ZE 90/10-10-F/SL (Gear pump) Year of manufacturing: unbekannt output capacity: 6000 kg /h pieces: 1 different: guter Zustand I offer this machine in as-is where-is condition ex Warehouse Hess. Lichtenau, unpacked
- very well used and refurbished rotary vane vacuum pump - oil-sealed two-stage fine vacuum pump - Suction speed: approx. 18 m3/h, final pressure: 5x10E-3 mbar
Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar
brand new pump / tank column / data acquisition / diesel tank system Type eco 55 - not calibrated, Capacity up to approx. 55 l/min. suitable for diesel fuel, incl. - Tank machine with PC software (2,000 users) - 2 driver/vehicle identification system - Identification via transponder technology - USB interface for data retrieval - Wing cell pump with single-phase asynchronous motor - 230 volts - Oval wheel counter with pulse generator, accuracy = approx. +/- 0.5% - Inclined seat filter / dirt filter with fine sieve - 4 m dispensing hose DN 19 with type-approved automatic tap valve, incl. swivel joint and tap hose holder - Suction height approx. 3.5 m - Robust powder-coated steel plate housing Dimensions: approx. 1,410 x 520 x 275 mm - two-line, illuminated monochrome display, font height 8 or 19 mm - Tank data storage for up to 10,0 ...
Diodes Pump arrangement / pump chamber for FOBA DP50/FD84 New laser diodes with optimized water cooling, thus longer running times, excellent beam quality, higher laser outputs adjustable 6 months warranty, from the 6th to the 12th month pro rata Article-No. MA-103068 Data sheet with laser characteristic curve Delivery: EXW, collection possible VAT will be shown
Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.
Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.
Gear pump Axial Piston Pump NEW/NEW Manufacturer: Rexroth Type: A11VO95DRG / 10R-NSD12K02 Further details and scope of delivery can be found in the Photographs.
Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.
Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.
Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.
Grease pump SKF SP 865L The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.
Feed Pump Centrifugal Pump Manufacturer: KSB Model No.: Etanorm G032-200 20.0 m³/h Head 58 mtr. m. electric motor 8.6kw The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.
Stainless steel pump body + pump impeller, 40-160, Lowara, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery: 1 piece stainless steel pump impeller, SH/FH 40 D171 S2, 150784350, second-hand top, original price € 448 excl. 1 piece stainless steel pump body, CRP SH40-160 DIN-JIS, 151380090, second-hand top, original price € 1025 excl. VAT, pump body, cover motor side, cover suction side + connection. Seals mostly present, screws missing. Bellhousing and pump mounting bracket (blue) free of charge Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...
SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar Dimensions: 1050 x 650 x 2000 mm More items - new and used - can be found in our shop! International shipping costs on request!
Piston Diaphragm Pump Motor power 5.5 kW Flow rate 6 m3/h Delivery pressure 15 bar The pump was only in operation for 3 years to feed a chamber filter press with vegetable oil
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/104-3 -Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: 0.5-2.4 m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg
Water pump electric 230 volt Operation unknown Auction-ID: A1-40133-266
Application: mobile and intelligent hydraulic pump for controlling and documenting bolting procedures. Serial number: 600/002/2011, with pressure sensor and display, including transport box and lattice box Auction-ID: A1-45495-285
Wilo Yonos PICO Plus 25/1-4 Heating Pump Circulation Pump Auction-ID: A7-45427-247
Piston dosing pump, type EK 1 H, with batch control via electric pulse preselection counter incl. remote summier movement. Working pressure 7.5 bar, max dosing current 290 l./h, pipe connection Rd 34 x 1/8 inch with hose sleeve NW 15, with control cabinet, mounted on table.
Stainless steel pumps, Hilge, Fristam, various versions and sizes
High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...
Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale
Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW
used
used pistons - membrane pump Abel CM-G-H-272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash general-outdated!
Cat. No. 08-1608 in very good condition Dimensions and weight: Length: 100 cm Width/depth: 32 cm Height: 60 cm Weight: 32 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
used
used
Cat. No. 07-1260 in very good condition Capacity: 35 cubic meters/h at 6.3 bar = 63 m water column Dimensions: Length: 120 cm Width: 48 cm Height: 48 cm Pump diagnostics: Pressure test: 4 bar Suction capacity: - 1.5 bar to -0.1 bar Pressure: 5.1 bar Power: 370 l/min., 22200 l/h Ampere min./max.: 16.5 6 bar DN 65 15 kW For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
used
used pistons - membrane pump Abel CM-G-H272 conveyor achievement: 15 m? / h conveyor pressure: 2 cash engine: 3 kW, 400 V, 50 hertz, 1500 rpm,
Cat.-Nr. 11-3405 in a very good condition LxHxW: 146x93x95 cm Weight: 200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used pistons - membrane pump Abel CM-G-H272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash engine: 11 kW, 400 V, 50 hertz, 1500 rpm,
used
Cat. No. 12-1075 in very good condition New price: 2000€ Dimensions and weight: LxWxH: 70 x 48 x 103 cm Weight: 38 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
used pistons - membrane pump Abel CM-G-C262 conveyor achievement: 12 m? / h conveyor pressure: 15 cash engine: 7.5 kW, 400 V, 50 hertz, 1500 rpm,
maximum number of results exceeded
please refine your search
10 € 
