disc dryer used for sale

Material No.: 1.2487.0 // Serial No.: 1267-3491416 Operating hours: 26512 h Equipment / Additional information: Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Full load current drive motor: 14 A Electrical diagram: STG-03000 00

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

General SKU413X1252 LocationBarneveld CEcheck MakeKöllemann Adenau TypeAJK-QTHSF-DN600 Pressure Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume6000 Ltr. Motor15 KW Specified Features - Continuous dryer Torus-disc dryer4-shaft screw dryer” (1x) Continuouscheck CapacityCa. 6000 l. Trough sizes5920x1970x600 mm Inlet2x DN250 Outlet260x1500 mm With jacketcheck volume 650+200 l. Shaft can be heatedcheck Max. temperature100°C Motor15 kW, 400 volt, 1450 rpm (Ex) Speed mixing shaft5.2 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.0505190/204986/02 Year of construction2004 Mounted on framecheck Floorspace8,50x2,40 m Total height1,60 m Weight17.000 kgContinuous dryersNew arrivalsKoelleman FoedertechnikDryers > Continuous dryersNew arrivalsBrand > Koelleman Foedertechnik What you c ...

General SKU308T739 MakeAllgaier Werke LocationBarneveld CEcheck TypeWS-GT-0,75 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information No.280 Year of construction2004 With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

Key data: 22 , 8 , 2

Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)

Bicone dryer manufactured by LLEAL, model SBC-1400.

Air dryer with vacuum conveyor, mounted on the injection unit or free-standing Drying of the plastic with hot air Hermetically insulated silo Capacity: 15l

Manufacturer: GEW Model: E2C Machine Type : UV Curing System Technical Specifications - Power output: 140 W/cm - Number of lamp housings: 9 - HMI control stations: 10 - Maximum lamp life: 2500 hours per lamp - Cooling: fully air-cooled, no water installation required - Condition: as new Find more here - / Contact us at -

An Arburg plastic granulate dryer with integrated material conveying is available. Hopper volume: 100l, max. drying temperature: 150°C, heating capacity: 4.5kW, air capacity: 90m³/h, conveying height: approx. 3000mm, machine dimensions X/Y/Z: approx. 950mm/600mm/2000mm, weight: approx. 150kg. An on-site inspection is possible.

Ride-on - scrubber drier Kärcher Professional B 250 R + D100  time 2 years is in stock with us not worked with it therefore does not work  2 years ago has expired time that is in stock Product description: âœ" Manufacturer: Kärcher âœ" Model: B 250 R + D100 âœ" Condition: used, tested âœ" Operating hours: 927 hours âœ" incl. a roller brush of 100 cm working width âœ" is equipped with a 250 l water tank âœ" is ideal for cleaning larger surfaces Details see pictures

Used belt dryer from Hans Binder Specifications: belt width 2.62m Length of belts 14m total length 25m total height 6.2m total width 2.9m 5 levels of drying belt The dryer has 2 heating zones 1- 60-110 degrees. C, 2-70-90 deg. C The tape is made of perferized stainless steel tape. has brushes for cleaning the tape apples, celery, dill, beets were dried. Year of manufacture 1997 Gas burner dryer.

Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating -Handover: in its current condition as inspected -Connector damaged: see photos -Dryer: used for powder coating slat/blind manufacturing -Dimensions: 1650/570/H285 mm -Weight: 124 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, filter dryer, compressor protector, suction line filter dryer -Manufacturer: Parker, Suction Line Filter Dryer -Type: SLD 13-5SV -Pressure: up to 400 PSIG / 27.5 bar -Dimensions: Ø 105 x 133 mm -Weight: 0.9 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, filter drier, filter dryer, liquid filter drier -Manufacturer: Danfoss, Refrigerant Filter Dryer -Type: DN 084 -Contents: 0.17 liters -Quantity: 1x filter dryer available -Price: per piece -Dimensions: Ø 55 x 167 mm -Weight: 0.5 kg/pc.

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer -Manufacturer: Danfoss, liquid collector with filter dryer -Filter dryer: Type: DX 033 -Permissible operating pressure: 28 bar -Individual components: see photos -Dimensions: 190/180/H360 mm -Weight: 6.1 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, liquid collector, refrigeration unit, liquid separator, filter dryer housing, filter dryer, filter drier, liquid filter dryer -Manufacturer: Danfoss, liquid collector with filter dryer 2 pieces / double version -Filter dryer: Type: DX 083 -Permissible operating pressure: 28 bar -Individual components: see photos -Price/tax: complete -Dimensions: 350/350/H360 mm -Total weight: 13.8 kg

Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet -Manufacturer: Küppersbusch, Electrode dryer type SET-4 -Nominal temperature: up to 300°C -Usable space: WDH 140/140/460 mm -Voltage: 220 V -Power: 0.9 kW -Contents: see photos -Dimensions: 385/365/H695 mm -Total weight: 19.3 kg

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Manufacturer: Giardina 4 Zonen Trockner, Year: 2007, Control: SPS TX 37, Work piece width min-max mm: 100-1320, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 6-70, Working widht max mm: 1320, Number of pallets: 92, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Lichte weite Paletten: 115, Tragfähigkeit Palette kg: 180, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Trockenzonen: 4, Abluftzone 1 Abluftmenge m/h³: 6000, Heizregister 1 kcal/h³: 30000, Trockenzone 2 Abluftmenge m/h³: 4000, Heizregister 2 kcal/h³ : 57000, Trockenzone 3 Abluftmenge 3 m/h³: 4000, Heizregister 3 kcal/h³ : 57000, Kühlzone 4 Abluftmenge 3 m/h³: 8000, Heizregister 4 kcal/h³ : Möglich 57000, Feeding speed m/min: 3-5, Conveyor/Conveyor belt: Stange, Heizmedium Warwasser: 3 X Viessman 60 kw Gastherme, Max.Temperatur Grad: 50, Damper register - items: ...

Manufacturer: Rippert, Type: Düsentrockner, Work piece width min-max mm: 1300, Channel length in mm: 14000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: max.80, Ex geschützt: yes, Gesamthöhe mm : 2500, Temperature regulation: yes, Druckdifferrenzschalter: yes, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Working height in mm: +/-950, Conveyor lenght mm: 14500, Through running hight mm: 100, Feedin speed m/min: 5-15, Belt conveyor: yes, Air speed in jets: ca.20, Round nozzle: yes, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.70,

Manufacturer: Bürkle, Type: Düsentrockner, Year: 2001, Work piece width min-max mm: 1300, Channel length in mm: 6000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 120, Umluftleistung m³/h: 11000, Mischluftleistung m³/h: 11000, Abluftleistung m³/h: 2500, Abluftventilator kw: 7,5, Ex geschützt: no, Gesamthöhe mm : ca.3000, Temperature regulation: yes, Druckdifferrenzschalter: yes, Conveyor lenght mm: 8000, Through running hight mm: 80, Feedin speed m/min: 5-25, Rod transportation: yes, Air speed in jets: 25 m/sec, Flat spray nozzle: yes, Max. air temperature: 120, Heated by: Thermoil, Damper register - items: 1, Year :2001

Manufacturer: Bürkle , Type: Düsentrockner, Year: 2001, Length mm: 15000, Channel length in mm: 10000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: 60, Kanaltemperatur Grad: 120, Umluftleistung m³/h: 25000, Mischluftleistung m³/h: 27500, Abluftleistung m³/h: 2500, Raumluft m³/h: 2500, Abluftventilator kw: 0,5, Mischluftventilator kw: 15, Ex geschützt: no, Gesamthöhe mm : 3200, Conveyor lenght mm: 16000, Through running hight mm: 80, Feedin speed m/min: 5-25, Rod transportation: yes, Air speed in jets: 25 m/sec, Flat spray nozzle: yes, Max. air temperature: 120, Heated by: Thermoiol, 1st Damper register kW: 172, Year :2001

Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor - CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Overall dimensions: mm 1350 x 600 x 1200 h - 168 kg

A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18

Offered is a modular hot water belt continuous dryer. Heating medium: hot water heat exchanger, temperature level: supply 120°C / return 80°C, air volume flow: 1000m³/h, instrumentation: (TI), (PI), (FIC), integration into central PLC control system, prepared for vacuum pumps (P7101), connection: screw conveyors (M7301/M7302), 6-fold silo battery (S7501-S7506), rotary valves (M7501-M7506). Viewing by appointment possible.

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

FLEISSNER, AB 3,500 mm, with 6 drums, 1,400 mm Diameter, built around 1985, but overhauled in 2008 and with new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW SIEMENS control S7 from 2008 with touch screen Motors with frequency converter, 50 m per minute, up to 250 °C

A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

Equipped with 6 separate UV elements and continuous conveyor; Extraction pipe to 1st bend Auction-ID: A1-43429-8

Power: 0.77 kW Operating parameters: Working pressure 15 bar; FAD 3.50 m³/min (124 CFM); noise ~50 dB(A); dim. 628 x 521 x 825 mm; wt. 75 kg Workpiece capacity: Compressed air drying for industrial air systems Supported edges: N/A Edge types: Air drying; moisture removal Included equipment: Refrigerated air dryer; air-cooled system; control panel; compact housing Compliance: Industrial air treatment unit; CE N/C Power supply: Electric Year/Manufacturer: 2005; Manufacturer N/C Remarks: Used condition; suitable for integration with compressors up to ~3.5 m³/min capacity Compact refrigerated air dryer for efficient moisture removal in compressed air systems up to 15 bar. Auction-ID: A7-45988-8

Power: 22 kW (30 hp); VSD (variable speed drive) Operating parameters: Working pressure 4–13 bar (adjustable); FAD 0.72–4.00 m³/min (25–141 CFM); noise ~67–70 dB(A); operating hours 64,000 h; dim. 1,330 x 870 x 1,725 mm; wt. 516 kg Workpiece capacity: Industrial compressed air supply; variable demand applications Supported edges: N/A Edge types: Compressed air generation; drying (integrated dryer) Included equipment: Rotary screw compressor; VSD inverter control; integrated air dryer (full feature); air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; energy-efficient VSD system for variable load operation 22 kW variable-speed rotary screw compressor with integrated dryer and adjustable pressure ran ...

Power: 22 kW Operating parameters: Working pressure 13 bar; FAD 3.45 m³/min; noise ~70 dB(A); operating hours 25,816 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation; drying (integrated air dryer) Included equipment: Rotary screw compressor; integrated air dryer; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2006; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for workshop and industrial air systems 22 kW rotary screw compressor with integrated dryer, 13 bar pressure and 3.45 m³/min capacity. Auction-ID: A7-45988-2

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

Type: Refrigeration dryer Standard conditions: DIN ISO 7183 (7 bar, 35 °C inlet, 25 °C ambient, +3 °C PDP) Nominal flow (50 Hz): 0.4 m³/min (24 m³/h, 14 CFM) Nominal flow (60 Hz): 0.47 m³/min (28 m³/h, 16 CFM) Pressure dew point: +3 °C Operating pressure: 2 – 16 bar Max. inlet temp.: 65 °C Max. ambient temp.: 50 °C Power consumption: 0.13 kW Refrigerant: R134a Electrical supply: 230 V / 1 Ph / 50–60 Hz Air connection: 1/2\" BSPP-F Dimensions (W x H x D): 300 x 520 x 400 mm Weight: ~24 kg Features: E-Pack aluminium heat exchanger with SS demister, digital controller with PDP indication, alarm contact Auction-ID: A7-45988-21

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-45988-9

Type: Refrigeration dryer Standard: DIN ISO 7183 (7 bar, 35 °C inlet, 25 °C ambient, +3 °C PDP) Nominal flow (50 Hz): 6.2 m³/min (372 m³/h, 219 CFM) Nominal flow (60 Hz): 7.15 m³/min (429 m³/h, 253 CFM) Pressure dew point: +3 °C Power consumption: 0.57 kW (50 Hz) / 0.69 kW (60 Hz) Operating pressure: 2 – 16 bar Max. inlet temp.: 65 °C Max. ambient temp.: 50 °C Air connection: 1 1/2\" BSPP-F Electrical supply: 230 V / 1 Ph / 50–60 Hz Refrigerant: R513A (or R134a in older units) Weight: ~55 kg Features: E-Pack aluminium heat exchanger with stainless demister, digital controller with PDP indication, alarm relay, timed drain Energy mode: Optional Energy Save” function for low partial-load power draw Auction-ID: A7-45988-13

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-45988-17

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-45988-14

Type: Refrigeration dryer with thermal mass control Model: SECOTEC (type TA 8 or higher) YOM: 2013 Flow rate: 2.55 m³/min Power consumption (100% flow): 0.80 kW Power consumption (50% flow): 0.53 kW Pressure loss: 0.20 bar Air connection: G 1 Condensate drain: G 1/4, ECO-DRAIN 30 with ball valve Electrical supply: 230 V / 1 Ph / 50 Hz Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Features: SECOTEC controller with dew point trend display, cycling refrigerant compressor, insulated cold surfaces, floating alarm contacts Auction-ID: A7-45988-22

Nauta type dryer manufactured by NAUTAMIX ASSEN suitable for drying powders, granules, pastes and sludge. Overall dimensions Maximum diameter in the body 1500 mm Minimum body diameter 280 mm Material Stainless steel Shirt or mid-calf material Iron Technical characteristics Year of manufacture 1979 Working Body Pressure 0.007 bar Working Body Temperature 130 ºC Total Body Volume 1905 L Half-calf/liner working pressure 5 bar Half-round/sleeve working temperature 160 ºC Half-calf/shirt volume 111 L Engine 3.6 kW - 1430 rpm ENGINE 2 0.37 kW - 1300 rpm Equipment Setup Shirt Transportation Information Length 1700 mm Width 1700 mm Height 3000 mm Documentation No documentation Status Refurbished Manufactured by NAUTAMIX ASSEN (HOSOKAWA)

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Atomizer manufactured by NIRO ATOMIZER in 304 stainless steel, model F10. Material Stainless steel Technical characteristics Model F10 Status In your state Manufactured by NIRO ATOMIZER