used Disc dividing saws for sale

Cutting length: 4.100 mmCutting height: 2.100 mmCutting depth: 60 mmoutput: 3 kwsaw-blade dia.: 250 mmturning speeds: 2.850 U/minDust suction hood: 140 mmlength in total: 4.512 mmweight: 420 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Cutting length mm: 4300 Saw blade protrusion mm: 90 Pre-scoring unit: Yes Main engine KW: 11.0 Travel Program slide mm: 4400 Number of collets: 9 Labelling machine

trolley length 3200mm guiding the trolley on bars dial angle adjustment maximum disc diameter 300mm scoring diameter 120mm main saw rotation 4000/6000 rpm manual up/down saw adjustment manual adjustment of the saw kata main motor power 5,5kW scoring motor power 0,75kW year of manufacture 2021 machine brand new total weight 750kg power supply 380V

Pneumatic: Yes 01 - Saw unit 5 KW Saw blade mm: 500 01 - Copy milling unit 7.5 KW

Cutting length max mm: 6000 Saw blade overstand mm: 115 Diameter saw blade mm: 430 Vorritzer: Yes Machine Control: Microprocessor - G Drive 2 D Total connection kW: 18 Weight Kg: 19,000 Loading and unloading system "Essedue" - Manipulators

Description: Max depth: 45mm - Motor: 2.2kw - Approximate weight: 480kg - Overall dimensions: 5100x1600x2700mmdimensions (l x w x h) approx.: 5,100 x 1,600 x 2,700 mm, weight approx.: 480 kg

Description: cutting length approx. 5100 mm, cutting height approx. 2100 mmdimensions (l x w x h) approx.: 6,000 x 3,000 x 1,200 mm, weight approx.: 300 kg

cutting length: 4,500 mm, dimensions (l x w x h) approx.: 6,800 x 1,700 x 3,000 mm, weight approx.: 500 kg

saw blade protection: bei sägeblattdurchmesser 450 mm bis zu 125 mm, dimensions (l x w x h) approx.: 1,400 x 800 x 700 mm, weight approx.: 150 kg

Description: Technical data Saw blade projection for saw blade diameter 450 mm to 125 mm Collet opening 130 mm Main saw motors 18 kW each Scoring saw motors 2.2 kW each W.02 number : 9105 QUICK CLAMPING DEVICE 'POWER-LOC' FOR HS Patented quick clamping system with high axial clamping force. Simple operation, working without without compressed air. W.04 Number : 9115 QUICK CLAMPING DEVICE 'POWER-LOC' FOR VS Patented quick clamping system with high axial clamping force. Simple operation, working without compressed air. Translated with www.DeepL.com/Translator (free version)cutting height: max 125 mm, main saw blade: 450 mm, main motor: 18 kW, scoring saw: 2,2 kW, dimensions (l x w x h) approx.: 1,400 x 800 x 700 mm, weight approx.: 150 kg

Machine data Holzma HPP 380 43-43 Operating hours: 13900 Cutting length 4300 mm Cutting width (program slide travel) 4250 mm Roller rail (element 10-track) 1 piece Roller rail (element 2-track) 5 pieces Collets 6 pieces, the first 3 pieces: 2-fingrig Air cushion table 4 2160 x 650 mm ; L Central blower 1 piece with increased fan power Specifications: Saw blade projection 80 mm Saw carriage feed: forward 1-130 m/min, reverse constant 130 m/min Automatic cutting height ; Angle pressing device, min. pressure width 0 mm; max. pressure width complete cutting length Main saw motor 13.5 kW Scoring saw motor 2.2 kW Operating voltage 400 V (+10%/-5%) / 50 Hz Electr. Connection load for HS motor 13.5kW: 20 kW Power Control CADmatic 4.0 control with 19 inch flat display with touch function Label program + printer Pica 104 LABELLING PACKAGE TYPE 350 + Nut program + Turbo  ...

Description: Machine number 0-240-14-0390 Cutting length 4200 mm Collets 7 Main saw blade diameter 380 mm Scorer saw blade 200 mm Air cushion tables 4 (2100 x 650 mm) Control Cadmatic Data transmission online (RS232) and diskette Main engine power 13.5 kW Scorer power 13.5 kW Dimensions 6951 x 7785 x 1055mm Weight 5000kg main motor: 13.5 kW, serial number: 0-240-14-0390, cutting length: 4,200 mm, cutting height: 85 mm, opening of collets: 85 mm, collets: 7 pieces, main saw blade: 380 mm, scoring saw blade: 200 mm, air table: 4x (2100x650mm), control: Cadmatic, dimensions (l x w x h) approx.: 6,951 x 7,785 x 1,055 mm, weight approx.: 5,000 kg

Cutting length: 4.300 mmCutting depth: 4.300 mmCutting height: 80 mmmain drive: 13,5 kWsaw blade diameter: 350 mm: Ja Scoring unit: 2,2 kW: 1 - 150 m/min: 90 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions (l x w x h) approx.: 1,200 x 800 x 800 mm, weight approx.: 70 kg

Description: vertical cut max 2500 mm Maximum cutting length 4200 mm saw velocity Disco 300 mm 5,5 Kw 2855 rpm incisor velocity Disco 120 mm 0,55 Kw 2820rpm postforming saw group Disco 300 mm 0,75 kw, 2803 rpm Motor Power 6,25 Kw The machine is equipped with a 3rd motor that cuts and prevents 'tearing' of the material voltage 380 dimension 4800x1700x2670 mm weight 1900 Kg cutting length: 4,200 mm, cutting height: 2,500 mm, dimensions (l x w x h) approx.: 4,800 x 1,700 x 2,670 mm, weight approx.: 1,900 kg

Equipment: + Central angle pressing device + Manual adjustment of the scoring saw + Saw carriage feed: 1 - 60 m/min + Main saw motor 7.5 kW + CADmatic control with 3-D sequence graphics + Control center with 21 inch Full-HD multi-touch display in widescreen format + Unified user interface powerTouch + Optimization program "CAD-PLAN 4" on the machine + Tension freecut program + Painting of the machine and safety fence posts in RAL 9003 signal white + Design stripes, safety fence panels, safety doors and stele in RAL 7021 black-grey Specifications Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Saw blade projection 65 mm Saw carriage feed: forward 1-60 m/min backwards constant 60 m/min Program slider speed: forward 25 m/min backward 60 m/min Angular pressing device min. pressure width 0 mm pressure width complete cutting length Main saw motor  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Machine data Mayer PS 80 32/32 Cutting length 3200 mm Cutting width (program slide travel) 3200 mm Saw trolley – Main saw motor 9 kW – Voltage 3 x 400 Volt / 50 Hz – Saw blade diameter max. 320 mm – Saw blade protrusion max. 80 mm – Cutting height adjustment, motorized infinitely variable – Saw bearing with quick clamping system – Cutting length autom. via light scanner – Residual cutting device in the pressure beam – Pre-scoring unit – Engine: 1.1 KW – Angle table left 2000×600 in air cushion, – Angle stop forward 2000 mm, rear 650 mm – 2 side tables 2000×600 in air cushions, – Blower Material slider – Travel 3200 mm – AC servo drive, dimensional acceptance by means of magnetic tape measuring system – Double roller tracks, 9 pieces – Cladding grille: straight without door – 6 x package clamp 76 opening, single finger versio ...

Cutting length: 3200 mm Cutting width: 3200 mm Width of stroke: gear motor adjustment Main yoke: saw blade ø 300, Ã? 30, Z, SH 70 = 60 Before scoring unit: Yes - saw blade Ã? 125, Ã? 20, Z = 24 Softforming-aggregate: no Page print setup: Yes - execution: FR 50/100 Residual cutting device: Yes - cut-out pressure bar Veneer cutting device: Yes Be hem cutting device: Yes - distance: 145/525/1790 Plate front: 400 x 1400 mm - 2 PCs. Plate rear: 240 x 2960 mm - 1 piece Edition bars rear: 40 x 2960 mm - 5 PCs. Angle table: 480 x 1400 mm left Angle ruler: With excerpt Collets: 70/400/1600/2800 distance 4 units - floating- Stop JAWS: 1000/2200 distance 2 units - starr- additional foot rear: No - 3 feet Protection screen: Yes Foot switch: no Machine cuts by: left to right Aggregate can occur in every area: no Autom. Cut with saws Overtravel: ...

Machine data Panhans EURO P8 Cutting length 4200 mm Cutting width (program slide travel) 4200 mm Roller rail (element 1-track) 6 pieces Roller rail (element 2-track) 3 pieces Collets 8 pieces, Air cushion table 3 2160 x 650 mm Central blower 1 piece with increased fan power Specifications: Saw blade projection 82 mm Automatic cutting height ; Angle pressing device, min. pressure width 0 mm; max. pressure width 1300 mm Main saw motor 14 kW, main saw blade 300mm drm Scoring saw motor 1.5 kW, saw blade drm: 180mm Operating voltage 400 V (+10%/-5%) / 50 Hz Electr. Connection load for HS motor 14 kW: 20 kW Machine weight: 4750 kg Control with 19 inch flat display with touch function Optimization and Label Printers

Scoring unit: 1,5 kWmachine weight ab.: 4.200 kgMotor output: 5,5 kWcutting range: 4.500 x 3.200 mmturning speeds: 3.900 U/minsaw-blade dia.: 350 mmCutting height: 85 mmfeed: 6 - 30 m/mincontrol: Master 124 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: 1 fixed 2500x600mm 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations

I sell a panel dividing saw SCM Sigma Prima 50. Year of construction 2016. Cutting surface 3300x3200mm. Cutting height 50mm. Max saw blade diameter 320 + 160mm Main engine 5,5kW Scoring motor 1,1kW Total power 10kW Surface W.5400mm x D.7000mm 7 grippers with pneumatic regulation Side positioning roller from above. Pneumatic thrust. WinCut 12 optimization software included. Label printers included. Very good condition. Available same.

Used panel dividing saw Int. Art. Ref. m3404 Manufacturer SCM Type Z 45 cutting length 4,500 mm 2 cutting speeds Weight approx. 1.800 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to prior sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out ...

Description: Saw blade diameter 300 mm, speed 4750 rpmserial number: 11,864, cutting length: 5,000 mm, dimensions (l x w x h) approx.: 5,500 x 1,000 x 2,700 mm, weight approx.: 2,000 kg

Description: serial number 37442, cutting range approx. 5300 x 2100 mm, cutting depth max. approx. 80 mm, saw blade diameter approx. 300 mm, motor 4.4 kW, with scoring saw unit, length stop with digital display, pneumatic tilting, saw unit height adjustment with digital display, saw unit pneumatic tilting, saw unit immersion pneumaticdimensions (l x w x h) approx.: 9,000 x 3,200 x 3,200 mm, weight approx.: 1,100 kg

Description: cutting area approx. 5540 x 2115 mm, motor 4.4 kWdimensions (l x w x h) approx.: 7,000 x 2,400 x 2,700 mm, weight approx.: 400 kg