direction used for sale

Special machine for grinding (also paint grinding) of curved parts. The workpiece is clamped onto a sledge. The 6 grinding units are transverse to the feed direction. Machine is 12 m long. More information and photos on request.

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Ironing uniting machine System Dr. Datz Used Power up to 11000 Fl/h Direction of rotation: right - left Furnished for 0.33 l and 0.5 liter bottle

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

1 of used shrinkpacker (sleever with shrinktunnel), make KHS Kisters, type SP 035 V Basic, new 2003. Operating direction: left. Capacity upto 35 cycles/minute (in overspeed). Metering-belt type infeed. For over-wrapping & shrinking pre-packed trays. Last used for various collations of glass / PET bottles (330 - 2.000 ml) on tray. Suitable for print-registered film. With Siemens S7 PLC and Simatic OP, Indramat drives. Wired for 400 V / 50 Hz. Various manuals available. Condition: good. Available ex-warehouse The Netherlands.

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right

FOR SALE... 7 SETS-WARTSILA DIESEL 16V25 KW3800 YOB 1998 ENGINE AT TURKEY TO WHOM IT MAY CONCERN; WE VE 2 SETS WARTSILA DIESEL 16V25 KW3800 YOB 1998 ENGINES AT TURKEY PLS FIND ENGINES SPECIFICATION AT BELOW. ENGINE TYPE 16V25 RATED POWER 3800kW RATED SPEED 900r/min ENGINE NO. 3963/4080/4081/4093/4094/4184/4185 ENGINE RUNNING HRS 52200-78000HRS DIRECTION OF ROTATION CLOCKWISE YOB 1998 WE VE ADDATIONALY WARTSILA DIESEL 12V25 ENGINE RATED POWER 2760kW RATED SPEED 900r/min SERIAL NO. 3711 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services : info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

1 of used traypacker, make Kisters (KHS), type 140/80T, new 1992. Operating side: left. Last used for 73 and 99 mm diameter food cans as 6 or 12 on tray, with option to apply a tray lid. Capacity upto 80 trays/minute. Fitted with Siemens S7 plc + touchscreen and Indramat MI servo drives (2012!). Wired for 400V/50Hz. Machine can be elaborated with a Kisters wrapping station and shrinktunnel to create an 80-cycle trayshrinkpacker (operating direction to change to right).

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

with 12 closing heads for top caps (Piccolo plastic caps) running direction: left - right

CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours

KRONES Canmatic Running direction: left Continuous linear/normal Performance about 40,000 bottles / HR Including format sets for 1.5 liter, 1.0 liter, 50cl. and 33cl PET bottle Spray system by ROBATEC The machine is in good condition and is available from November 2015.

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Weed brush Nimos ECO-60 HM, three-point front attachment with PTO pump for brush-drive. Right-turning PTO drive in working direction! Also suitable for direct hydraulic drive. Hydraulic motor with flat-sealing hydraulic connections. For swivel functions 3 x dw required. Brush-circle D = approx. 700 mm, Swivel range from left to right approx. 250 cm. Other weed brushes stock, also hand-held and self-propelled work machine. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

Ortmann +Herbst / Crown Simplimatic 100/15/15 Glass Bottle Filler with 100 filling valves, 15head crown corker and 15head Zalkin plastic cap screw capper with Pick and Place System Model: Hansa M Built: 1999 Running direction: left - right Pitch: 113 mm with double pre-evacuation Capacity: up to 40,000 bph at 250 ml of mineral water bottles up to 30,000 bph with 330 ml of beer glass bottles Electric: Siemens S7 with touch panel with safety housing incl. 200, 250, 330, 500, 750 and 1,000 ml sets (bottle drawings attached) incl. many spare parts (e.g. filling valves, lifting cylinders, crown cork head etc. - list attached) The product distribution list was renewed in November 2019. Hot filling is also possible if you use Nitrogen instead of Co2.

Vacuum filling and closing monobloc Cobert 32/8 for 38mm widemouth PET bottles Type: Ambra with 32 filling valves and 8 head Arol plastic screw capping machine (incl. pick and place system) Tempreature filling: 85° C degrees hotfill Running direction: right to left Neck size: 38mm widemouth year of manufacturing: 1994 capacity: approx. 6.000bph based on 1.0 ltr. PET-bottles incl. saftey housing around the machine

Weight: approx.4500 KG mash. No.: 6517991 General/technical data: Vertical CNC machining center in a very good, almost new condition, first-hand with very little operating hours. Travel: X= 670 Y=450 Z=470 mm Rapid response: in X and Y = 24m/min, in Z =20m/min Spindle motor: 10 KW Spindle speed: from 50 to 4,500 rpm Spindle cone: SK 40 Control: Siemens 810 M GA 2 Dimensions clamping table: 900 x 420mm max table load: 300 kg Distance spindle head to top of the table: 630mm spindle center to stand face: 470mm Tool slots in the magazine: 24 pieces DIN ISO 40 max. tool diameter: 110mm to 125mm tool length 100mm to 280mm tool length Beuvvquh2i Dimensions of the machine approx.: 2200 x 3000 x 2950 mm (without operator, service and chip conveyor environment) Accessories/ Optional equipment: â?¢ external coolant system with 2 pumps â?¢ Chip conveyor with ...

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

Model: 1240-20-6-4-180 Year of construction: 1996 Capacity: 8000 direction: right machine Feeding: Linear - straight Aggregate: Agg. 1: 6pcs PWL 370, AGG. 2: 4pcs PWL 210 Aggregate self adhesive: 2 x Glue roller: Steel Management: 1 x capsule infeed star orientation, 1 x outlet star Voltage 230/400 V Etikettenl: Hull, back Machine dimensions: B = 2, 90 m, L = 2, 70m, H = 2, 40 m

with 36 rinsing stations running direction: left-to-right

Brand new Original Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Remanufactured Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Ref.-No. 00579 Z1 Description Used intensive mixer Manufacturer Eirich Type R08 Built in 1995 maximum filling 60l / 90kg Industry 7322 Granulating zinc oxide dust Control Not available Machine description - R08 (mixed material temp. max. 80°C) - Star-tangle tool; 4-stage; Li.-Run - Wirbler drive power: 5.5kW - Wirbler drive speed: 1000 rpm - Wirbler rotation direction: Left-hand run - Wirbler speed: 340 rpm - Wirbler circumference speed: 6.2m/s - Wirbler drive type: V-belt - Mixing container drive: friction wheel Type of wear - mixing container with soil wear segments + Wear wall - Star-wire tool with armor - Wall scrapers with armor Accessories - Storage vessel V=115l with Ebro shut-off valve DN200 and Vibration motor - Ebro shut-off valve DN150 on mixing container cover mounted (transition) - Dosing conveyor screw for zinc oxide filter dust, incline  ...

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

8head machine work direction: right to left

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

8 closing heads work direction: right to left

Manufacturer: KRONES Type: K405-xxx Model: 960-16-5-5 YOB: 2003 Performance: 16,000 bottles/hour Running direction: RM clockwise feeding: linear - straight Aggregates: Agg 1 PWL460, AGG 2 PWL 300, AGG 3 donation unit Bottle table: servo Guiding: 1 x retaining infeed starwheel, 1 x discharge retaining starwheel Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, wrap around Machine dimension: L = 3, 00 m x W = 2, 20 m without partly overlapping of the unit and discharge extension.

Lid FP 1 in very nice condition x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Digital display Z-502 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch

Type: K728-1xx Model: 720-12-4-4 YOB: 1997 Performance: 18,000 bottles/h Running direction: clockwise feeding: straight parallel Aggregates: Agg 1 PWL 370, AGG 2 PWL 300 Bottle table: cam Guiding: infeed 2 x, 1 x discharge Label L =: min. 40mm, 130mm Bottle diameter: min. 50mm, 110mm Bottle height (H): min. 150mm, 350mm Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, neck Machine dimension: L = 2, 40m x W = 2, 30 m without partly overlapping of the unit and discharge extension.

Private sale Item condition: maintained Availability: immediately Coating band: yes ChocoTemper is part of the product line of the ICB Tecnologie chocolate temperature control device, with a tub capacity of 24 kg. Both machines can be equipped with vibrating table, while the coat straps for Chocotemper 24 are available • Stable stainless steel frame • Two independent motors, one for the screw and one for the agitator, for a longer life • Standard, removeable screw for easy cleaning and a quick change of chocolate • Control of the chocolate flow with pedal possible • Touchscreen control panel with various options: - Automatic dosages for a good way to do the right chocolate. - Night mode to keep the chocolate dissolved and reduce consumption during downtimes. - Counter-rotation of the screw, which is useful during cleaning The Chocotemper 24 chocolate temperature contro ...

- Single head machine - Direction : R – L - Different bottle sizes - In very good condition

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

--> Grinding blades in the opposite direction. Suitable--> mill for the processing of spices. 2 drives: 15 KW + 7.5 KW.

-Air conditioning from BS-40 -Exhaust fan to the correction of the fermenting Cabinet climate -Turret cutting head with pneumatic connection and Capacity for maximum 4 tools -Kaiserstüpfler with pneumatically driven, adjustable flour Shaker -Hanger drying -Ablegevorrichtung for Gärgutträter of the 3 euro sizes 400 Ã? 600 mm, 580 Ã? 780 mm, 580 Ã? 980 mm, maximum stripping length 1,000 mm -Insertion opportunity for proofing trays (standard links) -Fermentation freight carrier recording as a slot loading -Bypass belt pneumatic single - and extendible -Disinfection station -Screen control via touch screen -Operating side in direction of travel links

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

spindle moulder with tilting shaft SAC SUERI TS 145 second hand machine electric shaft inclination -5 ° / + 45 ° electric mast lifting extended plans support extension motor power Hp 7,5 n.5 shaft rotation speed electrical inversion of the direction of rotation shaft diameter mm. 35 volt. 380/50

1. driveway gate, new, (total length: 7,200 mm), single / self-supporting, clear opening width: 5000 mm x height: 1,500 mm, material: frame rectangular tubes and bars in square tube in statically sufficient dimensioning, 1 post with base plate and 4 Holes, height: 1,500 mm, incl. mounting material and Foundation plan, closing direction / driveway right or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: approx. 6-10 weeks) depending on the season)!

1 courtyard entrance / gate, new, manually drive can be manually push, there is a need but a certain force adult (total length: 7,200 mm), single / self-supporting, clear opening width: 5000 mm x height: 1,500 mm, material: frame Rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,500 mm, incl. mounting material and Foundation plan, gate is on closing direction / driveway right bolted to the Foundation, or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Wiedenmann front sickle mower working width 2100 mm, rear discharge. Air-filled tires, dome triangle Kat. 0., external nipples for blade bearings. For PTO 2,000 1/min in clockwise direction. Other mowers for various brands in stock! - Jodau environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...