diosna p 50 used for sale

turning diameter over bed: 1150 mm turning diameter over slide rest: 800 mm turning length: 6300 mm spindle diameter: 100 mm speed: 4-800 (x24) U/min turning dia. in gap: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details.

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...

Hydraulic pump with motor, axial piston pump PARKER pump: PV080R1K1S1NPWS pressure ( P max ): 420 bar continuous pressure ( pd max ): 350 bar volume ( Vg max ): 80 cm3 / U 3Speed ( n Max. ): 2000 rpm Motor: ADDA Antriebstechnik Type: FCP225MT-4 45 kW 1475 rpm 380 / 660 V 3AC, 50 / 60 Hz IP55 used, tested ! Dimensions: 1300 x 800 x 800 mm

Hydraulic Pump, Axial Piston Pump PARKER PV046R9K1T1NMR1 Vg: 37,37,000 8 ccm/rev Vg max: 46 ccm/rev pd: 350 bar p max: 420 bar shaft: Ø 32 mm flange: Ø 125 mm used, tested ! Dimension: 310 x 230 x 160 mm

Hydraulic pump, axial piston pump PARKER PV046RIKITINFPG Vg: 46 cm3/U pd: 350 bar p max: 420 bar shaft: Ø 32 mm flange: Ø 125 mm Dimension: 310 x 230 x 180 mm

Hydraulic pump, axial piston pump PARKER PV080R1K0S1N-PRZ Vg max: 80 cm3/U pg d max: 350 bar p max: 420 bar shaft: Ø 40 mm flange: Ø 160 mm Dimensions: 460 x 220 x 400 mm

Pressure Switch PARKER PSB040AF1A52

Manufacturer: DMG Type: Tool presetter Year of Manufacture: 2013 Find more here - / Contact us at -

Manufacturer: Müller-Weingarten Type: Double column drawing press Press force: 400 tonnes Working area: 1,600 x 1,300 x 1,400 mm Year of Manufacture: 1963 Find more here - / Contact us at -

Manufacturer: Müller-Weingarten Type: Double column drawing press Press force: 400 tonnes Working area: 2,000 x 1,300 x 1,200 mm Find more here - / Contact us at -

Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and CO₂ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects CO₂ and ensures complete homogenization. Storage tank stabilizes th ...

Used CIP Tetra Pak year 2010 15T/h The Used CIP Tetra Pak year 2010 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing plants. Consequently, this system ensures an effective sanitation cycle without requiring production line disassembly, optimizing downtime and reducing water and detergent consumption. Tetra Pak built the Used CIP Tetra Pak year 2010 15T/h in 2010. Specifically, its 15-ton-per-hour operational capacity makes it suitable for high-productivity plants while ensuring hygiene standards that comply with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak year 2010 15T/h The Tetra Alcip 1 applies a controlled washing cycle to remove organic and inorganic residues from production circuits. In particular, the system integrates separate tanks for water, alkaline detergent, a ...

Technical Specifications & Performance Data The Used Zambelli Pump 50 liters per hour is a compact, gentle-transfer solution designed for wineries and beverage production environments where product integrity and sanitation are paramount. This second hand unit leverages a rubber impeller to move delicate fluids with minimal shear, making it suitable for wine decanting and transfer of de-stemmed product (must), as well as other low- to medium-viscosity beverages. Manufacturer: Zambelli Machine type: Rubber impeller transfer pump Nominal capacity: approx. 50 liters per hour (process-dependent) Construction: Bronze pump body for food-contact applications Flow direction: Reversible flow for flexible process routing Connections: Garolla hose connectors for rapid hook-up and changeover Application focus: Wine decanting, transfer of de-stemmed grapes/must, and general beverage transfers Integrat ...

Pneumatic cylinder ORSTA Pn1A 80x80 B TGL 42869 Piston diameter: Ø 80 mm Rod diameter Ø 25 mm stroke: 80 mm New ! Dimensions: 345 x 105 x 105 mm

Pneumatic cylinder ORSTA Pn1A 100x125 B TGL 20747 Piston diameter: Ø 100 mm Rod diameter Ø 25 mm stroke: 125 mm New ! Dimensions: 390 x 125 x 125 mm

Pneumatic Cylinder PARKER CBB-2AR34MC ND 21405-03 Series 2A stroke: 120mm rod diameter: Ø 25mm New ! Dimensions: 325 x 65 x 65 mm

Pneumatic cylinder PARKER CDD-2AR14MC NC19443-10 series 2A stroke: 110 mm Rod diameter: Ø 16 mm Swivel pin: Ø 25 mm New ! Dimensions: 255 x 115 x 65 mm

Pneumatic Cylinder PARKER CJ-2ARS33MC ND 21405-02 Series 2A stroke: 100 mm rod diameter: Ø 45 mm New ! Dimensions: 500 x 220 x 165 mm

Pneumatic cylinder PARKER BB-2ARS14M NI 41015738 series 2A stroke: 30 mm rod diameter: Ø 25 mm pmax: 18 bar New ! Dimensions: 260 x 105 x 100 mm

Directional Control Valve , Pneumatic Valve PARKER, TELEPNEUMATIC PRSA121M 080172 New ! Dimensions (packaging): 110 x 65 x 45 mm

Directional Control Valve Base ORSTA Dn25 - TGL 20705 Pn 1 MPa ED 100 TGL 43334 220 V AC New ! Dimensions: 310 x 1110 x 65 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER PWR-A1483 80956 1 - 10 bar Control line connection: 8 mm push-in connection threaded connection: G 3/8 Throttle check valve set consists of 2 valves ! New !' Dimensions(Single Throttle Check Valve): 65 x 65 x 30 mm Dimensions: 120 x 70 x 30 mm

Logic Elements Set, AND Valve PARKER, TELEPNEUMATIC PLL-B12 080052, 80052 Set consists of 2 valves ! New ! Dimensions(single AND valve): 66 x 26 x 30 mm Dimensions(Packing): 75 x 70 x 35 mm

Pneumatic valve ORSTA, REGLERWERK DRESDEN Type: 1.110 142 TGL 201/87 New ! Dimensions: 100 x 115 x 100 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER, TELEPNEUMATIC PWRA1458 080950 1 - 10 bar Control line connection: 4 mm plug-in connection threaded connection: G 1/8 Throttle check valve set consists of 3 valves ! New !' Dimensions(Single Throttle Check Valve): 45 x 45 x 20 mm Dimensions: 60 x 60 x 80 mm

Pressure Control Valve, Swivel Differential Pressure Control Valve PARKER, LEGRIS 74712121 1 - 8 bar threaded connections: G 1/2 New ! Dimensions: 100 x 80 x 35 mm

Pressure Control Valve Set, Differential Pressure Control Valve PARKER PWP-B1289 9944 1 - 8 bar Control line connection: 8 mm plug-in connection threaded connection: G 1/4 Pressure control valve set consists of 2 valves ! New !' Dimensions(Single Pressure Regulating Valve): 65 x 50 x 25 mm Dimensions: 130 x 60 x 65 mm

CIP pump PLC control cabinet Prominent dosing

Exzentnerschneckenpumpe von Mono Pumps sehr guter Zustand

Handle applicator for carton, tray and six pack

This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden

pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden

pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m

Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 450 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...

Plate Processing Machine Manufacturer: Hundegger Type: SPM-2 Speed Panel Year of Make: 2011 CNC control SPM-2 for panel format 3,200 x 2,600 mm Milling unit 6 kW Max. speed: 23,500 rpm Milling tools Outer diameter max.: 100 mm Cutting length of milling tools max.: 60 mm Z-axis: positioned + moved by spindle units 5-axis milling unit 6 kW Milling spindle motor: 6 kW frequency-controlled Max. speed: 23,500 rpm Milling unit can be rotated 360° in the Z-axis Inclination up to 46° to the Z-axis Milling tools outer diameter max.: 20 mm Cutting length of milling tools max.: 60 mm Z-axis: moved + positioned by spindle units Ink-jet labeling head Max. font height: 50.8 mm Colour prints possible Z-axis pneumatically operated, Head can be automatically swivelled by 180° Automatic stacking system Electronically controlled lift table Stroke max.: 1,000 mm Max.  ...