diosna p 50 used for sale

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Mach.No.WK 109923A / WK 340369 Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KGCatalysts & fillersF ...

General SKU201P111 MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer MaterialStainless steel 1.4404 (316L) Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck Information LocationBarneveld Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kgCatalysts & fillersFeed additivesPaper & otherConical dryersOther pha ...

: neu : 2026 : 070152 : prompt, Zwischenverkauf v : Türkei : 4800 € : 1 : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 50 mm : 80 mm : 0.55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 € : 149.19 € : 500 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.37 kW : 0.1 - 3 U/min : 45 s : 800 mm : M20X6 mm : 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating ...

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Lippert belt conveyor GF 5030-570-450 RA2496 Technical data: Conveyor length (NL): 5030 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5030 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

Gas forklift built in 2018 in technically and visually very good condition. Technical highlights: Load capacity: 5,000 kg Mast: 5.2 meters triplex (3-fold) with free lift 4-way control block Joystick hydraulic control Factory steel cab with heating Work lights Very good solid rubber tires 4 fork extensions (MEYER 6-5409N) Further data: Engine power: 80.2 hp (59 kW) Drive: Hydrostatic Hours: 1,863 h Weight: 7,350 kg Tyres: 4 wheels

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

x-travel:630 mm y-travel:600 mm z-travel:650 mm control:MSC 502 (Fanuc 16) Spindle RPM:12000 1/min spindle drive:22 / 18,5 kW rapid travel x/y/z:32 m/min Pallet dimension:500x500 mm numbers of pallets:2 table load:0,5 t working diameter:max. 610 mm Number of tool station:60 BT40 max. tool length:360 mm max. tool weight:12 kg tool changing time:1,3 sec B-axis positioning (non continuous):1 total power requirement:50 kVA weight of the machine ca.:14 t dimensions of the machine ca.:3,3 x 5,8 x 3,2 m spindle load monitor:Typ C This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface,

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

x-travel:630 mm y-travel:630 mm z-travel:500 mm number of spindle speeds:0 - 15000 spindle motor:32 kW size of pallet:500 x 500 mm b-axis:36000 x 0,001 ° no. of workpieces in the magazine:61 Stück tool taper:HSK 63 weight of the machine ca.:15 t Single-Spindle Mechanical processing cylinder head VR6

grinding diameter max.:3-220 mm regulating wheel width:500 mm max. width of grinding wheel:500 mm weight of the machine ca.:16 t. dimensions of the machine ca.:12 x 10 x 8 m. grinding wheel diam. min/max.:420-610 grinding wheel diameter - width-internal grin:304,8 x 500 mm Regulatin wheel diameter min/max.:300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the  ...

turning diameter:500 mm turning length:1500 mm spindle motor:16 kW Spindle RPM:1 - 2500 1/min taper in tailstock MT:5 tailstock quill stroke:160 mm tailstock quill diameter:70 mm total power requirement:22 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3,2 x 1,8 x 1,4 m Machine with Heidenhain Manual plus control - Multifix quick tool change device - 3-jaw chuck - sliding splash door - various accessories.

turning diameter over bed:500 mm turning diameter over slide rest:310 mm turning length:1500 mm spindle turning speed range:7 - 710 U/min feed range:5,6 - 224 mm/min total power requirement:15 kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,9 x 1,4 x 1,6 m Machine with 2-axis digital readout - MULTIFIX quick tool change device - 3-jaw chuck

Performance ·Max. motor power: 30 kW ·Max. engine speed: 10,000 rpm ·Rated torque (test bench): > 100 Nm ·Max. braking torque: up to 122 Nm ·Max. braking power: up to 46 kW (overload) Dynamometer ·Type: AC asynchronous dynamometer, frequency-controlled ·Voltage: 360 V ·Cooling: Forced ventilation (IC06) ·Protection class: IP23 ·Insulation class: F ·Speed range: 0 ? 10,000 rpm ·Continuous operation: up to 40 kW (depending on speed) ·Overload capability: 1 min every 10 min Measurement System ·Torque measurement: oHBM T12HP torque flange oMeasurement range: 200 Nm oAccuracy class: 0.02 ·Speed measurement: oIncremental encoder, 1024 pulses/rev oAccuracy: ±0.01 rpm ·Vibration monitoring: oIntegrated vibration sensor Mechanical Structure ·Slotted base plate with air suspension (Bilz air springs) ·Vibration-damped test bench ·Motor mounting system: oAdjustable aluminum fram ...

turning length:2000 mm control:- total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:3800 x 1800 x 1850 mm swing over bed:500 mm swing diameter over face slide:280 mm control:Zyklen-Steuerung Heidenhain bed width:350 mm Documents:vorhanden

grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

General SKU288N443 MakeConstructiebedrijf Verkouille No.A9673 Year of construction1997 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket8 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity5000 Ltr Vessel sizesdia.1700mm x2200mm Dished bottomcheck Dished top sidecheck Manholedia.500mm, dia.200mm Top connections(2x)dia.100mm, dia.80mm, dia.25mm Outletdia.80mm Half coil jacketedcheck With paddle stirrercheck Motor2,2 KW, 230/400 Volt (EExd II) Stainless Steel Reactors MaterialStainless steel 1.4401 (316) Information LocationBarneveld Floorspace2,0x1,8 M Total height+/- 4,5 M Weight3250 KGAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsRu ...

General SKU011Y102 MakeMirodur SpA. Aprilia TypeTurbomill 50HP No.128 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor37 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillImmersion mill (1x) Capacitybasket 10 Ltr, Basket dia. 430mm Motorhydraulic drive unit 37,0 KW, 380/660 Volt Information With switchgearcheck Floorspacemill 2,4x0,8 M Total heightmill 2,7 M Extra Specifications- Dim. hydraulic unit: 2,3x0,8x1,3 Mtr (LxWxH) - Shaft length ± 1150mm (incl. basket) - Distance between shaft and frame ± 700mm Sand millsDiscountMirodur SpaMills > Sand millsDiscountBrand > Mirodur Spa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU122N606 MakeNetzsch TypeLMJ 2 (506.02) No.204 842 Year of construction1983 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume2.5 Ltr. Motor4 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand mill(1x) Capacity2,5 Ltr. With jacketcheck Motor± 4 KW, Ex With variable speed drivecheck Capacity5-50 Ltr./Hr. With pumpcheck Motor0,25 KW Information With switchgear(0,6x0,3x0,9 M) Floorspace1,1x0,8 M Total height1,5 MSand millsDiscountNetzschMills > Sand millsDiscountBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU266U441 MakeBioengineering LocationBarneveld TypeLP351 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume50 Ltr. Motor4.9 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity50 Ltr. (max. 75 Ltr.) Vessel sizesdia. 345x870 mm Dished bottomcheck Top connectionsdia. 80mm, 20mm (7x) Outletdia. 20 mm With jacketcheck 15 Ltr. Max. temperature150 °C With propellor stirrercheck (double) Rushton-turbine Motor4,9 kW, 260 volt, 3250 rpm Speed mixing shaft1083 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.D574 Year of construction1988 Mounted on legscheck With switchcheck With switchgearcheck (as is) Floorspace0,8x0,85 m Total height1,9 m Weight450 + 220 + 210 kg Extra SpecificationsThis is a st ...

General SKU356S847 MakeEnco Energie Componenten GmbH (AT) LocationBarneveld Type509 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume509 Ltr. Motor0.55 KW Pressure6 Bar Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity509 Ltr. Vessel sizesdia.800 x900mm Dished bottomcheck Dished top sidecheck ManholeHand hole DN200 Top connectionsDN125, DN100, (3x)DN80, DN50 OutletDN80 Half coil jacketed(64 lLtr.) Max. temperature-29/160 Degr.C, With propellor stirrercheck Motor0.55 kW 230/400 volt (Ex) Speed mixing shaft356 Rpm Notified body(Tuv) Capacity509 Ltr Vessel sizesdia.800 x900mm Dished bottomcheck With covercheck ManholeDN200 Top connectionsDN125, DN100, (3 ...

General SKU274P408 MakeHellmich Behälter- und Apparatebau (DE) No.4973 Year of construction1998 Mounted on legscheck Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume10500 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity13300 Ltr (netto ±10.500 Ltr.) Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120°C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace2,6x2,6 m Total height5,5 m Weight6000 kgAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSol ...

Overview  This complete 500 L brewhouse package was manufactured between 2016 and 2017 by leading European companies, including Speidel, Spagni, Skrlj, Sommer, and MTA IT. Designed as a turnkey solution for small to medium-sized breweries, it includes all key equipment for mashing, fermentation, chilling, capping, labelling, and malt processing. The system was previously operating at 600 bph and can be adapted for up to 900–1,000 bph. It is offered for sale as the brewery has ceased operations and is immediately available. Technical Details  Brewhouse capacity: 500 L (Braumeister 500 L, atmospheric) Fermentation capacity: 4 × 625 L (total 2,500 L) Formats: 26 mm crown caps (adaptable to 29 mm) Labeller type: Self-adhesive, semi-automatic, for cylindrical bottles Malt mill capacity: 150 kg/h Chiller: MTA TAEevo TECH 015, 3.8 kW, refrigerant R410A Production speed: 600 bph (adaptable  ...

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : Dm. 200x78x78 mm : 2800 1/min : 300 mm : 300x150x55 mm : 350x150 mm : 500x160 mm : 3.6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain t ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : 350 mm : 300 mm : 500x160 mm : 350x150 mm : 300x150x55 mm : 2800 1/min : 3,6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg : Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to m ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 € : 848.04 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7,5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm ...

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry
 COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW

General SKU345S761 LocationBarneveld MakeUnex Heatexchanger GmbH (DE) TypeHybrid No.HB 25228400028 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 m2 Capacity42 Ltr ConnectionsDN80(2x), DN 50(2x) Max. temperature-30/200°C. Information Floorspace1,0x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU345S754 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400034 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersHybrid Number of stages:1 Heating surface5.7 Capacity42 Ltr ConnectionsDN50(2x), DN100, DN40, DN80(2x) Max. temperature-30/200°C. Information Floorspace0,9x Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU345S1121 LocationBarneveld MakeUnex TypeKondensator No.HB25228400032 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface5.7 m2 Capacity42 Ltr. ConnectionsDN80 (2x), DN50 (2x) Max. temperature-30/200 °C Information Total height0,7 m Weight260 Kg Floorspace0,9x1 m Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S814 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400033 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7m2 Capacity42 Ltr ConnectionsDN100, dn80(2X), DN50, DN40 Max. temperature-30/200°C. Information Floorspace0,9 x 0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU345S784 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400035 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface12 m2 Size length1200 mm Sizes width1100 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersfully welden plate heat exchanger Heating surface12 m² Capacity111 Ltr., 57 Ltr. (shell) ConnectionsProduct: (2x)DN80, DN40: Plates: DN150, DN80 Max. temperature-30/200 °C Information Floorspace1,2 x 1,1 m Total height0,8 m Weight490 kg Extra Specificationssuitable for use as a condenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...

General SKU345S770 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400030 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 M2 Capacity42 Ltr Connections(2x) DN50,(2x) DN80 Max. temperature-30/200°C. Information Floorspace0,9x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld  ...

General SKU329T1340 LocationBarneveld MakeDec TypeDrum sealing cover No.DSC-130 Year of construction2016 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) Information Mounted in framecheck Total height2,9 m Weight400 kg CEcheck Floorspace0,79x1,32 m ATEX compatiblecheck Extra SpecificationsWith powderbox, Dia:500x200mm lifting column stroke 320mm balancer cap. 7,5-11,5 kg suction lance DN40 triclamp x approx 1500mm cip connection Stäubli R 1/4” hub 2000mm, Magnehelic box Bizerba weighing scale, type ST-D-Z2, (Ex) Dec powder transfer system, type PTS 80-N cap. 500l/h temp range max 100°C pressure -50/+50 PED class Gas 2/ Art. 3.3, consumption 5 Nm3/h (stickstoff) at 3 bar, product input DN 32 Triclamp, product output DN80 PN10, pneumatic control, dim. 600x380x210 mm, roll conveyor, ...

General SKU330W1522 LocationBarneveld MakeAro Type650-607 Mach.No.90’ 1747 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Pneumatic drivecheck Outletdia. 25 mm Information Year of construction1990 Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU330W1524 LocationBarneveld MakeAro Type650-607 Mach.No.15’1064 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Pneumatic drivecheck OutletDia. 25 mm Information Year of construction2015 Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!