diosna p 50 used for sale

Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine.

A complete layer palletizing system IW-Anlagentechnik with a pallet wrapper Tosa and pusher technology is available. Process chain: product infeed-layer formation-palletizing-transport-wrapping. 1) Palletizing system IW-Anlagentechnik PMS 120, year of construction: 1992, rotating unit: 90°. 2) Conveyor technology Transpak. 3) Rotary ring stretch wrapper Tosa 124E, year of construction: 2010. The system was used in the food industry for palletizing bottles and other liquid containers. Documentation available. An on-site inspection is possible.

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A.  ...

This 6-axis Axial PHS-W-124 was manufactured in 1999. It features a bending force of 120 tons and a bending length of 4 meters, with a stroke of 200 mm. The machine is equipped with a Wila tooling system and a Step Automation Rock 17+ control with a 3D editor. If you are looking to get high-quality bending capabilities, consider the Axial PHS-W-124 pallet handling system we have for sale. Contact us for further details.

Profile steel shears, 80/110, Mas. No. 4423251690035 See photos

Malvern Mastersizer 3000 + Hydro LV - Advanced particle size and size distribution system - Widest measurement from 0.01 – 3500 µm - Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

Offer 25272 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2000 kg

Offer 25274 Hydraulic – single-column press with drawing cushion Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - Drawing cushion 10 t - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2400 kg

Offer 25275 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2200 kg

Ref. №: 4222 Portion cutting machine for meat with/without bone, bacon, ham, diary products, fish, vegetables Cutting chamber size (LxWxH): 700 x 220 x 240 mm Cut-off length: 0-70 mm Machine width: 90,0 cm Machine length: 200,0 cm Machine height: 145,0 cm Motor power: 3,4 kW Operating voltage: 380 V, 50 Hz

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

General SKU251U336 MakePfaundler LocationBarneveld TypeCH 4000 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity4440 Ltr. Vessel sizes1400x3200 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC MaterialGlass - Enamel (WWG-9115) Information No.66058 Year of construction2000 Mounted on legscheck Floorspace1,5x1,5m Total height4,1m Weight1790 kgPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

A complete film packaging line Georg Hartmann, consisting of a line distributor, two grouping units and a pillow pack packaging machine, is available. Packaging materials: film, Packaging capacity: approx. 30 packages/min. Documentation available. An on-site inspection is possible.

Max. size= 155 x 155 cm, Availability= 042026, Max cutting width: 155cm Electronic program control with monitor (EMC-MON) Big side air tables left and right for easy material handling Two-hand mechanical cut activation 2 extra knives LOT Loaded in truck or container

Width 137 cm Year of construction 2000 AUTOTRIM Computer control with monitor Color Monitor Air table refined 2 side tables RA-4 vibrator with spreading roller Transomat TR 130 EL-4 Right-to-left way of working Delivery date: immediately from stock

General SKU255X230 MakeHosokawa Alpine Type100 UPZ No.62390 Year of construction1998 Main Features Motor1.5 KW Inlet diameter50 mm Width100 mm Specified Features - Pin Mill Pin disc millcheck Rotor size100 mm Grinding room sizeDia. 180 mm Number of pins on house side:192 Number of pins on door side:192 Pin diameter0,3 mm Without sieve cagecheck Housing dimensions Dia. 180 mm With hoppercheck InletDia. 50 mm Feeding with vibro feedercheck 230 v. (Ex) Motor1,5 kW (400 v., 2835 rpm, (Ex)) Speed17500 rpm Information LocationBarneveld With switchgearcheck (as is) Floor space0,40x0,60 m Total height0,95 m Weight55 kgPin MillsNew arrivalsHosokawa AlpineMills > Pin MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You  ...

Format range: Box length: 80-535 mm, Box width: 50-500 mm, Equipment: standard, right/left curve, Packing scheme: 1-5 rows next to each other, 1-5 layers on top of each other, on creasing line 2 or 4 as well as on closure caps, Output more than 200,000 boxes per hour. Cleaned / checked / new wear parts.

Side Tables, Light Barriers, Programmable, Standard Accessories

cutting height at 90°: 125 mm; cutting width at 90°: 600 mm; width roller convoyer: 600 mm; diameter saw blade: mobile: yes; machine length: 3100 mm; machine width: 1900 mm; machine hight: 1750 mm; weight: ca. 650 kg;

sawing length: 5300mm; sawing height: 2100mm; cutting depth: 60mm; scoring unit: no; feed: manuell; read out horizontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; evasive workpiece support: ja; speed sawblade: ca. 4000 U/min; motor power: 3 kW; machine length: 6500mm; machine width: 1500mm; machine height: 3000 mm; weight: 800kg;

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display of planing thickness: mech. Counting display; Feed speed: 7-11-15-19; Feed roller: steel jointed; Pressure bar: articulated; Pull-out roller: rubber; Table rollers: no; Table extension: Yes inlet and outlet; Motor power: 7.5 kW; Suction port: 160mm; Machine length: 1070mm; Machine width: 900 mm; Weight: 750kg;

Working width: 630 mm; Planing shaft: strip knife; Number of knives: 4; dressing table length: 2200 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: manual; maximum clearance thickness planer: 220 mm; Height adjustment thickness table: electric; Indication of planing thickness: Scala; Feed speed: 7/14m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: articulated; Table rollers: yes; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 160mm; Machine length: 2200 mm; Machine width: 1150 mm; Weight: 1250;

Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil Preheating System: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;

Capacity: 15 - 55 kg/h; Briquette diameter: 55 mm; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 4 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg; The Nano briquette press is ideal for companies with small production. Due to the compact design, it is also possible to mount the press under an existing extraction system without great effort.

- Display - Program - Luftitsch - Formica air side tables - Spare blades

Polar 115 X Year 2008 Counter: 830,000 Features: 115 cm cutting width Central air table Sidetable Polar LW 1000 Lift 2 Spare knifes Documentation, tools

WE ARE SELLING A PRESSTATION WITH A SNAP SYSTEM WITH/WITHOUT ONE CAPACITY, SUITABLE FOR PRESSING RECYCLED RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) Type: SPN15 Year of Manufacture - 2006 CAPACITY - 30 m³ Power - 11 kW Can be sold unpainted or new painted. PRICE ON REQUEST!

- Programm - air table - side table left and right - spare knife

Open format min. 210 x 210 mm Open format max. 320 x 670 mm Final format min. 48 x 50 mm Final format max. 320 x 670 mm Feeding capacity: 100 mm Grammage 110 - 350 g/m2 Speed: 11 sheets / minute - Slitter, creasing and perforating in one pass - Infeed system with suction and blast air - job memory

Includes 1 punching tool / 2:1 round hole Machine Cycle Speed: 60 strokes per minute Working Modes: Punching tool only: for standard work (plain paper) Punching tool with separator: difficult work (with cardboard) Production Speed: Depending on the size and condition of the paper to be punched, but lower than the maximum cycle speed. Tool Change Mode: Manual mode and duration approximately 45 seconds Format Change Mode: Manual mode and duration less than 1 minute Maximum punching thickness: 0.7 mm (equivalent to approximately 7 sheets of 80 g/m²). Maximum hole diameter: 8 mm Paper weight: 80 to 250 g/m² Minimum sheet size: 138 x 138 mm Maximum sheet size: 330 x 300 mm Power supply: 220 – 240 V, 50/60 Hz Technical specifications according to the manufacturers specifications (without guarantee)

Grafoteam PST 480 N Pressure Plate Stacker; cleaned and tested; height-adjustable; Format 811x1200mm; incl. Printing plate trolley. Plate stacker Grafoteam PST 480 N; cleaned and checked; adjustable in hight; size 811x1200mm; included plate trolley.

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

Automatic bundle packer with integrated grouping device. PLC: Siemens SIMATIC S7-300. Remark: Machine is not complete.

General SKU255X226 LocationBarneveld Main Features MaterialStainless steel Motor31.3 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity172 l Basket sizesø 1000 x 500 mm With hydraulic unitcheck With variable speed drivecheck Max. basket speed1520 rpm With hydraulic unitcheck Motor1,8—18—31,3 kW (Ex) MaterialStainless steel 1.4552 Information MakeKrauss Maffei TypeHZ1000/1.6 PH Mounted on framecheck With switchcheck (as is) With switchgearcheck (as is) Floorspace2,68 x 2,85 m Total height2,05 m Weight9100 kg Extra SpecificationsFilter area 1,6 m²Peeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

Baier GEBA 1/F embossing press, Embossing plate: 70 x 90 mm, Embossed pressure: 600 kg, Work table: 620 x 620 mm, Embossing plate: 70 x 90 mm, Embossed print: 600 kg, worktable: 620 x 620 mm

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, excellent conditions, installed power - used power in work: about 60-65% : 20.75, conditions: as new, availability: immediate, capacity: up to 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual “0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details.

Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Hours: 5812 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Climbing tape Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Gradient: 29° Speed: 0.6 m/s Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's spec ...

ID3779 Putzmeister P715 D year/Baujahr 2015 approx. 1540 hours/hours 1.8 t Concrete pump with diesel engine; the P 715 reliably delivers pumpable materials up to 16 mm in size over long distances; high-pressure pump with a delivery pressure of up to 68 bar and a flow rate of 18 m³/h, including a Morath concrete spraying unit Concrete pump, with diesel engine, the P 715 delivers pumpable media up to 16 mm reliably over long distances, power pump with up to 68 bar delivery pressure and 18 m3/h, incl. concrete spraying unit Morath

NEW, - 240 cm width, - 0.90 m³ capacity, - 440 kg net weight, - with Merlo mount, - crocodile shovel / pelican shovel with 2 hyd. Cylinders, - strong double stiffened hold-down device, available in different working widths and with different mounts

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

Stock# U2473-3 Used bi-wing /lobe pump by Pomac (NL) model PLP 3-3. Contact parts designed in stainless steel (316L). Pump has horizontal location of inlet and outlet, each with diameter 76 mm / 3". Output up to 1 l per rotation of rotors. Maximal output up to 45 m3/h, with maximal rotation of lobes up to 750 rpm. Working pressure up to 15 bar. Currently pump is equipped with Lenze GST06-2M-VBR-100C32 drive, with el motor 3 kW, 230-400 V, 50 Hz. Working rotation of lobes up to 145 rpm, working pressure up to 6 bar. On current drive pump can reach output up to 7 m3/h. Pump is mounted on stainless steel plate.

- 2 x charging batteries with charger - 1 X electr. Closing - Welding Machine - Operating instructions - Normal traces of use - works without problems - Mobile, flexible, easy to pallet - No bending, back-friendly

Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...