din used for sale

Cantilever rack NEW Data: - H : approx. 350 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 350 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

Three-dimensional copy milling machine Fabr. SCRIPTA type probably SR 3 DXAFabr. -No: 1652 Year of construction not apparent, estimated around 1975 with BOSCH milling spindleapprox. 23 gear ratios from: 1 to 6Template table, clamping surface: 240 x 260 mmHeight adjustment: 150 mmMilling table clamping surface: 240 x 260 mmHeight adjustment sensitive: 58 mmMilling and copying device, height adjustable on round columngr. height between table and milling spindle approx .: 200 mmHorizontal adjustment: 140 mmelectrical connection for milling spindle, AC: 220 V.Space requirements measured over everything: 600 x 900 x 950 mmWeight approx .: 150 kgWith- Electrical device with speed control- pleadings:1 sentence standard font with letters and numbers1 dto in mirror writing with letters and numbers recessed1 set of normal pencil marks according to DIN 14511 dto deepened in mirror writing1 pleading ...

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

4 axis deep hole drilling machine Brand: Ixion mod. TL1400 Year: 1996/1997 Mitsubishi M530 H control system Executions and Racing Sleeve TL 604 (Z) 600 mm. Sleeve TL 1004 (Z) 1000 mm. Operating unit for vertical drill (standard) (Y) 400 mm. Operating unit for vertical drill (option) (Y) 800 mm. Cross table (table surface 1375 mm. X 700 mm.) (X) 700 mm. Cross table (table surface 1675 mm. X 700 mm.) (X) 1000 mm. Mobile column in the boring direction (W) 1100 mm. Circular table (option) (B) 360 ° Work table Table surface (standard) 1375 mm. X 700 mm. Table surface (optional) 1675 mm. X 700 mm. Load on the table max 2000 kg. Bridge Tool SK 40 holder according to DIN 69871 Tightening bolts according to DIN 69872 Main spindle AC drive (3.0 kW) at 100% of the insertion ratio, S1 3.0 Kw 50% of the duty cycle, S6 5.5 kW Spindle speeds directly programmable 100- ...

used chain conveyor belt Manufacturer: EuroTec Type : KB 1400 Technical data: Chain type : M 112 Feed length : approx. 6,150 mm Path length : approx. 9,500 mm Belt width : approx. 1,400 mm Conveying width : approx. 1,300 mm Steel body of the conveyor belt : made of St 37 Drive motor with brake : 5.5 kW Switch EMERGENCY STOP : yes Switch START- STOP : yes Lubrication with drip oilers : electric (MURDFELDT) Side tray heights in the feeding area: approx. 500 mm dto. in the climbing section : approx. 1,000 mm Climbing angle : approx. 30°/-20° Gooseneck : yes lower belt cover in the climbing area up to a maximum of approx. 2.50 m intervention height : yes Material outlet chute : yes Conveyor belt supports : yes technical design of the tape: Drive Manufacturer : Getriebebau Nord Type : Bevel gear jack motor Protection class : IP 55 Chain Type : M 112  ...

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Machine Type Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Plant No. 04E 85048 Connection voltage 1 x 230 V Setting range 40 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 26 Ampere 3.25 rod electrodes, since 120 / 130 amps Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age approx. 10 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 16 qmm, 4 mr. long 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy versio ...

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

turning diameter: 300 mm turning length: 710 mm control: SIEMENS SINUMERIC 840 total power requirement: 40 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly a ...

Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 19 / 28 kW max. Torque: 121 Nm tool taper: SK 40 DIN 69871 b - axis: 0,001 ° pallet changer:: numbers of pallets: 2 size of pallet: 800 x 630 mm pallet diameter: Ø 800 mm max. table load: 800 / (1.600) kg rotatable: C: 360 ° resolution: 0,001 ° max. table speed: 13,6 U/min T-slots: 50 H6 tool magazin:: number of toolpositions: 60 pos. tool taper: SK 40 DIN 69871 max. tool diameter: 100 mm max. tool-dia with free toolbox: 160 mm max. tool length: 350 / 315 mm max. tool weight: 10 kg feeds:: feed speeds: 20 - 15.000 mm/min rapid traverse: 50 m/min total power requirement: 59 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,0 x 7,0 x 2,7 m Documents: Coolantsystem: high pressure cool ...

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

VDI Tooling (VDI 40 - DIN 69880-40 / DIN 5480) Chipconveyor Shunk chuck Coolant pump 12 bar nbsp; Swing over bed: 380 mm Distance centre tot centre: 675 mm Max longitudinal travel Z-axis: 550 mm Max cross travel X-axis: 300 mm Dia of spindle bore: 87 mm Power on the spindle: 25/34 kW Number of speeds: 5000 rpm Command: Heidenhain Plus IT Toolchanger: yes Number of tools: 12 driven VDI toolpositions

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

CARRAGARM RACK NEW Data: H : approx. 426 cm D : approx. 137 cm L : approx. 403 cm Cantilever : approx. 120 cm Axial dimension: 131 cm NEW GOODS immediately from stock. 675 kg load per arm 2700 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 4 storage levels (5 storage levels) Shelf consists of: 04 x stand, incl. base approx. 426 cm made of IPE180. 16 x cantilever arms approx. 120 cm made of IPE 100 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pa ...

technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

CARRAGARM RACK NEW Data: H : approx. 416 cm D : approx. 137 cm L : approx. 402 cm Cantilever : approx. 120 cm Axial distance : 131 cm NEW GOODS immediately from stock. 500 kg load per arm 2250 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: 04 x stand, incl. stand approx. 416 cm made of IPE160. 12 x cantilever arms approx. 120 cm made of IPE 80 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pain ...

drive motor: 7,4 kW tool adaptor: ISO 40 turning speed range: 1800 U/min Torque: 400 Nm Technical specifications Bodies arranged at 45° with respect to each other. Maximum transmissible torque from 550 Nm to 3.180 Nm. Maximum speed from 1.800 rpm to 3.000 rpm. Automatic clamping of the tool, driven by a hydro-mechanical system. Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). Spindles and gears are made of case-hardened and tempered chrome-nickel. High-precision angular contact ball bearings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 1000 mm plate height: 310 mm weight: 1650 kg dimensions of the machine ca.: 2000 x 1000 x 300 mm Clamping plates - T-slot plates - panel array 2000 x 1000 x 310 mm If you have not found the size you require, you can also send us an e-mail send us an e-mail with the completed PDF form. With this we can can produce an individually manufactured panel for you. Number of grooves: 3 edge distance: 185mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876 Edge distance: 185mm Groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 450 mm bore: 120 mm faceplate - height: 120/165 mm short taper: Din 55022 7 Gr. 11 Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindl ...

turning length: 750 mm turning diameter: 310 mm centre height: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 r ...

german / English High-precision laser welding system fully automatic Laser 1 according to DIN EN 60825-1 Fully functional Well suited for medical technology, optics, precision precision engineering Granite bed Axes: X-920mm / Y-100mm /Z-100mm C-rotation axis - Föhrenbach precision rotary table B-Schenkachse IPG YLR-Series Laser 150Watt pulsed fiber laser 1070 nm Pilot laser red 633nm Camera Automatic door Drawer for vertical workpiece pick-up Control Fanuc 0i-MD Connection for extraction and shielding gas Dimensions: LxWxH 2400 x 1450 x 2200 mm Weight 2000 kg Connection 3 x 400 C / 32 A English: high precision laser welding machine fully automatic Laser 1 according to DIN EN 60825-1 Fully functional Well suited for medical technology, optics, precision engineering Granite bed Axes: X-920mm / Y-100mm /Z-100mm C-rotary  ...

Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V

Overview This is a complete KEG line consisting of a refurbished filler, a new transport system, and a new outside washer. With a capacity of 50 - 65 KEG/ h, 30l DIN and Euro KEGs can be processed. The plant can be delivered in approx. 8 - 9 months after receipt of order.  Technical details  Capacity: 50 - 65 KEG/h  Efficiency: 95%.  Container types: 30 l DIN and Euro-KEG  Fitting type: flat fitting type A  Supply voltage: 230/400 V, 50 Hz Control system: SIEMENS S7  Rotating and rotating device  Internal pre-cleaning station additionally purchasable  Automatic dosing device additionally purchasable  Scope of delivery Refurbished KEG interior cleaning and filling machine | M+F KEG-Technik | MINOMAT A5/5 New KEG exterior washer | M+F KEG-Technik | AW 1150-H  KEG transport system

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...

Modem for DIN Rail, Industrial Analog DIN Rail Modem COMTIME GmbH HSM ECO V.92 Interface to the network: analogue telephone network, dial-up line Transmission rate: 56,000 bps Supply voltage: 9 - 36 V DC Power consumption: approx. 0.8 W 2x connection cable New, with documents ! Dimensions( modem ): 95 x 35 x 100 mm Dimensions( packaging ): 210 x 155 x 80 mm

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

GeneralTwo- Spindle Turning Centre; Control: Sinumerik 840C Tool holder 2Shank diametre according to DIN 6988030 mmNumber of tool stations12 Number of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWSlide 3 (Spindle 2)Longitudinal stroke600 mmRapid traverse Z30 m/minFeed rate torque (100% DC) in Z700 daNSlide 2Longitudinal stroke555 mmTransverse stroke190 mmRapid traverse X20 m/minRapid traverse Z30 m/minSlide 1Longitudinal stroke555 mmTransverse stroke190 mmY axis, vertical+/- 40 mmRapid traverse in X20 m/minRapid traverse in Z30 m/minRapid traverse in Y7,5 m/minFeed rate torque (100% DC) in X/Y/Z400/700/700 daNMain drive 2Type of main driveAC Drive power (100% DC)14 kWDrive power  ...

Used Gea centrifuge model ASE-20. Year of manufacturing 2019. Allowable rated rotational speed of the drum min-1 1200 (FU:60HZ) Allowable feed material density kg/dm3 1 max. Allowable heavy liquid density kg/dm3 1 max. Allowable solid phase density kg/dm3 1.4 max. Allowable throughput m3/h 400/1.5 min./max Allowable feed temperature ºC /95 min./max Allowable housing pressure range bar (g) -/0.04 min./max Drum filling volume l 3.6 approx. Allowable vibration speed mm/s RMS 7 max. Measuring point on the stand Ambient temperature °C 10/45 min./max plate clamping pressure bar (g) 82-112 CIP possible - yes CIP flow rate l/h -/1800 min./max Sound power level dB (A) 80 DIN EN ISO 3746 Sound power level mW 2.94 DIN EN ISO 3746 Lubricating oil quantity l 2.25 approx. Construction type IMV1 Power kW 11 (FU:7.5KW) Voltage V 400 Frequency Hz 50 Type of protection IP55 Inv ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range  ...

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 1 consisting of: 1 acceptance funnel 1 Armbruster destemmer with 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 12.5 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2004 - Capacity: approx. 3300 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2600 x 1600 x 1250 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2004 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Worki ...

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 2 consisting of: 1 acceptance funnel 1 Armbruster destemmer 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 8 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2001 - Capacity: approx. 3500 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2950 x 1660 x 1000 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2001 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Working princ ...

Top door closer DORMA System TS93 DIN 2-5 DO 2.12 DIN 18263 Z New ! Dimensions: 270 x 70 x 60 mm

CONTROLS   PLC SIEMENS S7 300 Main spindle DIN 55022 size 11 Crosshead spindle DIN 55022 size 8 Drive power main spindle 30.7 KW Drive power hydraulics 33.5 KW Main spindle speed 350 - 1000/min Workpiece diameter max. 650 mm Crosshead stroke 300 mm Ejector stroke 80 mm Crosshead contact force 400 kN

Protective conductive clamp, PE terminal block, 10 pieces WIELAND 9700 A/70 E S35 Z2.302.0421.0 Cable cross-section: 70 mm² for DIN rail TS35 ( 35mm standard DIN rail ) New ! Dimensions ( single protective guide plug clamp ): 77 x 25 x 60 mm Dimensions ( packaging ): 255 x 80 x 65 mm