din used for sale

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 4.7 m -Type: DIX MS 330-4 SA -Transport dimensions: 400/480/H100 mm -Weight: 4.2 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.5 m -Transport dimensions: 430/360/H85 mm -Weight: 3.2 kg

Ground cable for MIG/MAG welding machine, electrode welding machine, welding cable extension, MMA welding cable -Welding cable: Ground cable for MIG/MAG welding machine, electrode welding machine -Version: Dinse plug -Length: 10 meters -Weight: 5.7 kg

Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.

Stop square, locksmith square, control square -Manufacturer: Holex, stop angle DIN 875/1 -Type: 452510 100 x 70 mm -Accuracy level: 1 -Dimensions: 105/70/H20 mm -Weight: 0.3 kg

MIG/MAG hose package extension, intermediate hose package -Length: 33 m -Version: Dinse plug, gas hose, control cable -Weight: 72 kg

x-travel: 2800 mm y-travel: 2200 mm z-travel: 800 mm Control: Heidenhain iTNC 530 table surface area: 3000 x 1200 mm tool taper: HSK-A-63 spindle turning speed range: 12000 U/min power capacity: 18 kW feed range: 35000 mm/min total power requirement: 68,7 kW weight of the machine ca.: t dimensions of the machine ca.: 12,4 x 3,5 x 4,6 m The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no cool ...

General SKU033H111 MakeDinnissen Machinefabriek B.V. Sevenum No.1970 Year of construction1976 Mounted on framecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Ribbon blender Ribbon blender(1x) Capacity2000 Ltr. Trough sizesDia. 1000 x 2500mm With covercheck Inlet740x200mm + Dia. 125mm + Dia. 600mm Manholeinspection hatch 500x470mm (3x) OutletDia. 140mm With adjustable packing glandscheck Motor7,5 KW, 380 Volt (Ex) Speed mixing shaft± 26 Rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld With switchcheck Floor space1,7 x 3 m Total height2,3 m Weight2500 kg ATEX designedcheck Extra Specifications- Bag dump cabinet with lump breaker on topRibbon blendersDiscountDinnissenMixers > Ribbon blendersDiscountBrand > Dinnissen What you can expect from Foeth: -- Machine is in working conditio ...

; Gross weight [kg]: 2600; Inspection Date: 2026-06-08; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

This is an industrial Dini Argeo platform/wheel load scale or mobile weighing pad for heavy loads or vehicles. On the photo you can clearly see the logo DINI ARGEO – Scales / Weighing systems. Dini Argeo builds such platforms for industry, warehouses, vehicles and axle load measurement. Dini Argeo +1 a mobile weighing pad / axle load or platform module Flat, robust platform Anti-slip rubber strips Six pieces available Price is unit price

; Gross weight [kg]: 2440; Inspection Date: 2026-05-30; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215

; Gross weight [kg]: 2440; Inspection Date: 2026-07-17; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Manufacturer: AMF, Screw block DIN 6400-70 with ball head attachment, 2 pieces -Order No.: 72405 -Fmax.: 60 kN -Minimum height with attachment: 75 mm -Max. height with attachment: 98 mm -Submission/Price: complete -Dimensions each: Ø 50 x 75 mm -Weight: 0.9 kg/piece

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mm length:75 mm 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details.

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Manufacturer: AMF, Screw block DIN 6400-50 with ball head attachment, 2 pieces -Order No.: 72397 -Fmax.: 15 kN -Minimum height: 38 mm -Max. height: 50 mm -Submission/Price: complete -Dimensions each: Ø 32 x 38 mm -Weight: 0.2 kg/piece

General SKU222W215 MakeDinnissen Typeunknown( missing type plate) Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor3 KW Length800 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesø 300 x 800 mm Inlet250 x 250 mm Outlet800 x 400 mm With inspection hatchcheck Motor3 kW, (400V, 1414 rpm, (Ex)) Speed81 rpm Air purged glandscheck With sieve cagecheck Sieve perforation2,5 mm: 3 mm: 4 mm MaterialMild steel, Stainless steel 1.4301 (304) With jacketcheck General With switchcheck Floor space1,70 x 0,75 m Total height0,90 m Weight340 kg Extra Specifications- sieves made of stainless steel 304 (total 3 pieces)- housing and screw steelOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic ...

x-travel: 7000 mm y-travel: 3200 mm z-travel: 1500 mm Control: Heidenhain TNC 530 table-size: 6000 x 3000 mm table load: - t spindle turning speed range: 6000 / 18000 U/min tool taper: ISO 50 / HSK 63 feed: 50000 mm/min spindle motor: 34 kW A-Axis: + / - 180 ° c-axis: 0-360 ° distance between columns: 4300 mm Passage height: 2300 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 12,2 x 9,3 x 5,9 m Equipped with: - Heidenhain TNC 530 CNC control - 1 milling head (TAEM) ISO 50, 6,000 rpm - 1 electric spindle head (TUPC) 18,000 rpm, HSK 63 - 1 extended head ISO 50, 6,000 rpm - 40-position tool changer (15x HSK A63, 25x ISO 50) - Coolant system (40 bar IKZ / 4 bar external) - CE mark - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: Overpressure,Manufacturer: DINO Steam Generator,Condition: Used,Volume: 110,Max. Overpressure: 3.0,Design: Hanging,Shape: Frame,Diameter inside: 400,Cylindrical height: 820,Total height: 1,150,Year of construction: 2020,Manhole / dome: in the top floor (DN 400),Type plate: Yes,Remarks: Principle drawing available Frame made of V2A,Last purpose: Autoclave for sterile masks,Material in contact with the product: V4A 1.4401/04 (AISI316),Bottom bearing: No,Current interferer: No,Bottom bearing: No, Power Interferer: No

VERTIGRAN ENTGRANNER Power 80 t/h 30 kw immediately available Mob. +491715213204

P2 - used 40 m³ / 40,000 litres steel tank, double walled, above ground or as underground tank, on 2 steel bases, in good condition. dimensions: diameter approx. 2.5 m (without base) length about 8.90 m height incl. base approximately 2.78 m base width approx. 0.90 m Stainless steel tank DIN6616 D, double-walled, inside plain steel, 2 steel bases. Former isopropanol tank / chemical tank. On request this tank can be refitted for ground installation with a bitumen coating on the outside. The container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, nutritional oil, as rainwater cistern etc. Price upon request. Item location is 79098 Freiburg im Breisgau. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, feel free to ask us. It is not possible to update all our advertisements daily. Sinc ...

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply Order No.: 29 38 74 3 -Type: MINI-PS-100-240AC/2X15DC/1 -Price: per piece -Number: 14 pieces -Dimensions: 100/45/H110 mm -Weight: 0.3 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply, Ord.No.: 29 38 73 0 -Type. MINI-PS-100-240 AC/24 DC/2 -Price: per piece -Number: 4 piece -Dimensions: 100/45/H110 mm -Weight: 0.3 kg

PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, switching power supply -Manufacturer: TDK-Lambda, DIN rail power supply -Type: DPP480-24-3 -Input: 3 PH 400-500 VAC -Output: 24 VDC 480 W -Dimensions: 150/112/H124 mm -Weight: 1.7 kg

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, switching power supply -Manufacturer: TDK-Lambda, DIN rail power supply from CNC machining center Santenberg GTC S 2 -Type: DPP240-24-3 -Input: 3PH 400-500VAC -Output: 24VDC 240W -Dimensions: 120/90/H130 mm -Weight: 1,1 kg

power converter, power supply, power supply, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, Wilo DIN rail power supply -wilo: Type CR-NT 12V DC -Input: 100-240 V AC 50/60 Hz 1.8 A -Output: 12 V 1.67 A -Dimensions: 100/25/H90 mm -Weight: 0.1 kg

Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg

power converter, power supply, power supply, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, Wilo DIN rail power supply type MDR-60-24 -Mean Well: Type MDR-60-24 -wilo: Type CR-NT 24V DC -Input: 100-240 V AC 50/60 Hz 1.8 A -Output: 24 V 2.5A -Dimensions: 100/40/H90 mm -Weight: 0.3 kg

Converter, power converter, power supply, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply, power supply module, power supply module -Manufacturer: Puls, Power Supply 3-Phase, 48V, 20A, 960W -Type: XT40.481 -Number: 1x module available -Dimensions: 160/95/H135 mm -Weight: 1.5 kg

Converter, power converter, power supply, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply, power supply module, power supply module -Manufacturer: Puls, Power Supply 3-Phase, 48V, 10A, 480W -Type: QT20.481 -Number: 1x module available -Dimensions: 130/65/H130 mm -Weight: 0.9 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Puls, Power Supply -Type: CPS20.241 -Input: 100-240V single-phase input -Output: 24V 20A -Number: 37 modules available -Price: per piece -Dimensions: 125/65/H130 mm -Weight: 0.9 kg/pcs

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Puls, Power Supply -Type: CP10.241 -Input: AC 100-240V / DC 110-150V -Output: 24-28V 10A -Number: 6 modules available -Price: per piece -Dimensions: 115/40/H125 mm -Weight: 0.6 kg/pcs

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-240-48 -Input: 100-240 VAC 2.6 A 50/60 Hz -Output: 48 V / 5 A -Number: 11x power supply units available -Price: per piece -Dimensions: 125/65/H125 mm -Weight: 1 kg/piece

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: NDR-120-24 -Input: 100-240 VAC 2.6 A 50/60 Hz -Output: 24 V / 5 A -Number: 12x power supply units available -Price: per piece -Dimensions: 125/40/H130 mm -Weight: 0.5 kg/piece

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Omron, Power Supply -Type: S8VK-C12024 -Input: 100-240V 50/60Hz 2.6A -Output: 24V 5A -Quantity: 1 module available -Dimensions: 120/40/H130 mm -Weight: 0.6 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-960-48 -Input: 200-240 VAC 6.0 A 50/60 Hz -Output: 48 V / 20 A -Quantity: 1x power supply unit included -Dimensions: 165/110/H130 mm -Weight: 2.3 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-480-48 -Input: 100-240 VAC 5.0 A 50/60 Hz -Output: 48 V / 10 A -Quantity: 1x power supply unit included -Dimensions: 130/85/H140 mm -Weight: 1.6 kg

Auction-ID: A1-48386-20

Auction-ID: A1-48386-170

- Rechargeable scale. Auction-ID: A1-46485-172

- Rechargeable scale. Auction-ID: A1-46485-173