We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,633 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Measuring range: 0-200 psi, 0-1380 kPa, 0-13.8 bar and 0-14.06 kg/cm2 Measurement resolution: 0.01 bar Measurement accuracy: ±2-1-2% of range Head: Rotatable (360°), with the tip set at a 45 degree angle Power supply: 2 x 1.5V batteries (AAA/R03) Dimensions: 133mm x 76mm x 32mm Approx. Onsite Dimension. (l x w x h): 100 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
We offer you a Keyence IM-7000 measuring projector from a current utilization. Year of construction 2018 Condition: Original price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89281 Altenstadt The sale is without warranty Subject to prior sale
used
Description: • Digital scale • Serial number 6007884 1999 • Capacity 300 kg • Minimum weight 5 kg • Resolution 100 g Approx. Onsite Dimension. (l x w x h): 600 x 600 x 150 mm, weight approx.: 50 kg
used
Description: 3 AXES Stroke 800 x 600 x 600 mm Collection on: 29/04/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description Approx. Onsite Dimension. (l x w x h): 3,660 x 3,740 x 1,990 mm, weight approx.: 3,500 kg
used
Size: 320 x 450 mm Equipments: Digital 4-colour press with Fiery computer With the machine is included 3x yellow 3x Cyan 3x Magenta 1x big box Black ink new
used
Radar system, radar system -For more information, see photos
used
Pinacho Rayo 180 Ø 360 x 1000 mm CNC Swing over bed: 360 mm Swing over cross-slide: 198 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 42 mm Power on the spindle: 5,5 HP Number of speeds: 100 > 4000 rpm Command: Heidenhain Length: 2870 mm Width: 1510 mm Height: 1550 mm Weight: 1,5 ton
used
- First ownership: from own use and first hand - Center height: 180 mm - Center width: 1000 mm - Diameter over bed: 360 mm - Bed width: 250 mm - Diameter of the main spindle: 42 mm - Control: Fagor 8055 TC - Constant cutting speed: 100-4000 rpm - Working feed Z.X: 0-7000 mm/min - Rapid traverse Z.X: 10 m/min - Main engine 5.5 kW
used
The MX-20 is a high-throughput planar radiography system that allows researchers to monitor animals quickly and affordably. This digital system can scan two to three animals at a time, depending on their size, and scans typically last 12 to 15 seconds. KV and exposure time settings can be easily changed using the computer screen or push buttons on the front of the unit. The MX-20 has geometric magnification capabilities up to 5X to provide ultra-high resolution images of small animals and specimens. The MX-20 has an energy range of 10-35KV and a tube current of 300uA. The focal spot size is
used
General SKU408T1292 LocationBarneveld MakeMettler-Toledo TypeXS 3 Advancheck No.37000019 Year of construction2010 Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck Information Mounted on framecheck With switchas is Weight530 kg CEcheck Floorspace1,6x2,2 m Total height1,9 m Extra SpecificationsAccuracy class: XIII(1) Metal detectorsMettler ToledoPackaging machines > Metal detectorsBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...
used
General SKU408T1293 LocationBarneveld MakeMettler-Toledo TypeXS 3 Advancheck No.37000027 Year of construction2010 Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck Information Mounted on framecheck With switchas is Weight530 kg CEcheck Floorspace1,6x2,2 m Total height1,9 m Extra SpecificationsAccuracy class: XIII(1) Metal detectorsMettler ToledoPackaging machines > Metal detectorsBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...
new
Rayzbend ES820 20 Ton 800 mm Length Electrical Servo Press Brake Double Cylinder Rayzbend looking for dealer in Eastern European countries
new
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
new
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
used
Signal towers, signal lights, signal lamp, signal tower, control lamp -Manufacturer: Telemecanique -XVB C21/ XVB C2B6 -Number: 4 pieces available -Price: per piece -Dimensions: 80 x 300 mm -Weight: 0.9 kg
used
Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
used
Automatic filling line for small to medium batches of vials, ampoules, tubes in frames or trays, consisting of X, Y-filling robot and peristaltic pump: X,Y-filling robot with 1 filling station: • Filling area width max. 555 mm, depth max. 345 mm • X, Y positioning max. +/- 0.5 mm • Object height max. 250 mm • Operating system Windows XP Professional Peristaltic pump: • Accuracy +/- 0.5 • 2 pump speeds 72+225 rpm • Dosing 0.5-1000 ml depending on tube-diam. • Flow rates 2.1-40.7 ml/sec depending on tube-diam. • Tubing diam. 3, 5, 8 mm • Manual or automatic mode • Delay in automatic mode 0.5-9.5 sec in 0.5 sec steps • Recirculation to dispensing vessel • With keyboard and mouse, without monitor, without undertable • Drive 240V/50/60Hz
used
Niton XRF equipment, model XL3t 980 GOOLD+. the spectrometer is practically new as it has been completely overhauled and recalibrated by the parent company in November 2023, changing the defective/worn parts which are under warranty for another six months or a year and which has the double metal/alloy -soil/rock setting. (each setting is worth 3000 euros) Overhauled by the manufacturer in November 2023, excellent conditions, comparable to a like new instrument. It is one of the most advanced models capable of reading even light metals such as aluminum, magnesium, silicon and precious metals. The equipment was purchased in Italy from the American company Thermo Fisher, to carry out tests which have now been completed. The spectrometer works perfectly. Reasons for sale: non-use. The equipment has a double configuration, both for soils and rocks and for alloys and metals. Th ...
used
used
Capacity: 70 units/min Dimensions: 1400 mm / 1500 mm / 1400 mm (L / W / H) Weight: 1800 kg Country of origin: Denmark
used
The line consists of: -Schmidt, year of construction: 1997 -Mixer, output: 5000b / h -Filler XRB 16, year of construction: 1997 -Screw ZX01, year: 1997 -Labeller KRONES PASANTA, year: 1997 -Tunnel packaging PPX 030 K, year of build: 2006 Power: 3000 packing/h
used
Very good condition Due to factory closure Taken out in working condition
new
UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...
used
Used, in very good maintenance condition: complete frick/York freeze pump system for industrial use, consisting of the following main components: Frick/York XJS 120S, lifting volume 415 m3/h, screw compressor unit, designed with oil separator, thermosiphon oil cooler, electric motor Leroy Somer 90 kW.The specified cooling capacity of 74 kW is achieved with refrigerant R717 at -40 C/+35 C. 4 identical units available
used
Used swirl sieve refining XW3E25. Throughput starch milk of processing 200 tons of potatoes/24 hours, the engine 13 kw, 1400 rev/min, documentation available.
new
Three separate oil coolers mounted in steel frame. Motors data: 380-420 / 660-720 V, 1460rpm, 11kW - 3 pcs The equipment unit is a device assembly manufactured for cooling the oil of a large machine icon. More information can be seen from the signs in the pictures and by asking. The device has three identical condenser units and they are available for use separately. The device can be adapted for many different purposes.
used
used
most spare parts, as well as control parts of all well-known manufacturers - see pictures (excerpt) list in auer-machinesdotcom >> spare parts
used
Wide belt sander GIANTWAY XSG 1300 R-RP Working width of 40 1300 mm - min. / max. clearance height 2.5 / 100 mm - speed infinitely variable 4 - 24 m / min. -1 grinding unit:-motor 30 kW / 400 V - belt speed 19.5 m/sec - 2. sanding unit - motor 22 kW / 400 V - belt speed 16 m/sec -Bursteaggregat - engine - 0,37 KW -Motor feed 5.5 kW - motor height adjustment 0.37 kW - pneumatic 8 bar - air consumption 0, 5 m 3/min - digital display with automatic workpiece thickness setting rubber transport carpet automatic star / Delta starter circuit - pneumatic belt tension - about thick backup using the self-timer - amperemeter for the monitoring of cut - immediately-stop with disc brake fault - pneumatic belt cleaning - CE standard
used
1 Hubgeruest from the Still R70-45 forklift truck without free stroke Lifting capacity 4,500kg with side slider and fork tine adjustment incl. hydraulic slurs Building height 280cm, weight approx. 800kg Price 2,400.-EUR 2. Lifting truck from the Linde E15 forklift Lifting capacity 1500kg Building height approx. 220cm with side slider Price 450.-EUR 3. Duplexhugeruest Hyster XL4.00 without free stroke Lifting capacity 4000kg Building height approx. 400cm with fork-traeger Price 2,650.-EUR Forklift Hubger Mast Mast Forklift Truck Hyster Linde Kalmar Still H80D R60-45 R70-45 E15 E20 DCD90-6 DCD 100-6 DCD 120-6 Special price
used
Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head
used
Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available
used
Description Brand UNOX Model XF 195 ID 0093 Status Active Price 800 € + VAT Location Oradea (RO) Shop oven with storage place UNOX XF195 manufactured in 2007. With AIR.Plus tehnology (fans with reversing gear), 99 baking programs memory each one made up of 3 baking steps + pre-heating, Protek SAFE technology for maximum efficiency and working safety (cool door glass and external surfaces). Temperature range: 30 C - 260 C. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la grese ...
new
Pressure reducing valve, XLC 410, DN50, PN25, CSA, new We have set the lowest price for the new part on the market. If you have a UID number, we will be happy to issue you an invoice without VAT. New! The part was bought from a spare parts warehouse of a company and has never been in operation and is completely new. The CSA model XLC 410 is a hydraulically operated automatic control valve that reduces and stabilizes the pressure behind the valve to a constant value, regardless of fluctuations in requirements and pressure conditions in front of the valve. Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.
used
FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...
pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch
used
used
used
used
used
used
Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Weight Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.
used
ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...
new
The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...
used
Marel IPM3 X600 Portioner for fish and meat Released: 2003 Condition: Restored Designed for slicing meat, fish fillets and whole fish into portions of similar weight. Two working conveyor belts allow you to speed up the slicing process and increase the productivity of 8 to 10 workers. Equipped with a dispersal conveyor belt, a sorting device on 2 x 2 baskets. Dimensions: 3400 x 1620 x 1700 mm. Pipeline width: 280 mm. Pipeline speed: 0.5 meters per second The number of resins per minute is 5 to 8. Power: 7.1 kW Connectivity: 3 x 380 - 480 B Send a request
used
Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm