127,518 used machines on RESALE, but how to find them? Machine Search
Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace
Machine data: Press force: 3,000kN Roller diameter: 850mm Working width: 400mm Briquette dimension: 38 x 32 x 16mm Briquette volume with 4mm gap: approx. 16cm³ Briquette weight: approx. 38g Throughput capacity: 30,000kg/h Rated speed: 17.9/min Circumferential speed: 0.79m/s
pressure: 150 t chamfer lenght: 4300 mm distance between columns: 3700 mm ram stroke speed: 100 mm/sec working feed: 8 mm/sec return speed: 80 mm/sec stroke: 175 mm table height: 920 mm Control: DELEM DA 52 total power requirement: 11 kW weight of the machine ca.: 15000 kg dimensions of the machine ca.: 4800 x 1700 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1 t Stroke: 315 mm table surface area: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used press in top condition Bj. 2011 New solid core plate with vacuum holes Press width 1700 mm Press length 3700 mm
High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor
baler hydraulic power pump HSM V-press 1160 Plus
pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm
pressure: 35 t chamfer lenght: 2000 mm weight of the machine ca.: 3 t total power requirement: kW distance between columns: mm dimensions of the machine ca.: m pressure 35to max. bending length 2000mm arrester behind drive capacity 4,5 kW weight 3000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 t chamfer lenght: 3050 mm distance between columns: 2550 mm throat: 250 mm stroke: 150 mm return speed: 65 mm/sec ajustment speed: 50 mm/sec work height max.: 1010 mm oil volume: 150 l total power requirement: 11 kW weight of the machine ca.: 9500 kg dimensions: 3100 x 1750 x 2850 mm Furnishing: - DELEM CNC control DA65 - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms sliding system” - side + back protection device - Hand and foot controls - Operation manual ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25100 Specifications: - Pressure capacity 200 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table width 180 mm - Projection 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Plunger stroke 150 mm - Adjustment range fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - with: - Back gauge with 2 stop fingers - Deer's foot tool - 4-fold universal die - Two-hand control panel, foot switch,
pressure: 200 t table length: 2500 mm table width: 1800 mm table travel: 2700 mm dayligth: 2250 mm upper clamping surface:: 1800x2500 column base area: 1900 mm total power requirement: 22 KW weight of the machine ca.: 30 t dimensions of the machine ca.: . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for t ...
SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo
SPECIFICATIONS: Installed power: 9.2 kW Briquette size: Ø 70 mm Complete with 13 filter bags (Ø 160 x 550 mm)
Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.
Offer 24591 Specifications: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 40 mm/s - Return 0 - 200 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Thermoforming force 10 t - Largest deep-drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg
pressure: 10 t distance between columns: 260 mm dayligth: 210 mm table surface area: 275 x 260 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control SAFAN ... TS 1 Thrust... 50t Bending length ... 2550mm controlled axes ... 4 Drive... Electric Max. ram stroke ... 215mm Main engine power ... 9kW Machine weight ... 5050kg The machine is in good condition, possible to test under power.
Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)
-) Press surface: 3,100 x 1,600 mm -) Cylinder: 8 cylinders -) Floors: 5 floors, 6 heating plates -) Heating plates: drilled 40mm steel heating plates -) Heating: for hot water or thermal oil (up to 200° -) Press opening: up to 600 mm -) Cooling: with own unit Etc.
FETTE Terminal, Data Control, Type 2080, Year 1989
Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007
FETTE Data Control 2, Installed in a mobile cabinet including an EPSON printer
Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002
: ja weight of the machine ca.: 9,5 t serial number: 10457/2 : 160000 KG stroke of worktool slide: 41 Hub/min Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 80 t, 400 mm, 112 mm
Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg
pressure: 40 t table length: 670 mm table width: 570 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HYDRAULIC PRESS with hot platens model ITALPRESSE SCF 6 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton. 120 opening mm. 400 hydraulic pump motor power Hp 3 hot water plates heating via wood boiler weight kgs. 4500 volt. 380/50
pressure: 8,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 27 Kg dimensions: 160 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
! Exhibition Machine Corresponds to the Panhans LLB116 with the following optional accessories: - Single-lever operation with fine locking - Dial gauge in the handwheel for height adjustment SPECIFICATIONS: - Max. drilling depth 145 mm - Max. elongated hole length 240 mm - Height adjustment 135 mm - Motor power 1.3/1.7 kW - Suction nozzle Ø 100 mm - Machine weight 200 kg
! Exhibition Machine Equipment/Technical Data Work table mm 800x400 Motor kW 1.5/1.9 kW Spindle speed rpm 1440 / 2880 Max. slotted hole height above the table mm 160 Max. longitudinal work run mm 345 Max. transverse work run mm 245 Spindle stroke mm 160 Clamping Ø of tool mm 0 - 20 Max. tool length mm 175 Span Center Piece 2 Rotating table ° +/- 45° Dimensions of the machine mm 1500x1100x950 Machine weight kg 345 Other features: - Mechanical dowel device, distance 16-22-25-32 - Mechanically numerical spindle height display - Suction nozzle
Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.
pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Courtoy Compressor, Type R292F, Type D, 55 positions, Year 1999, Missing the 2 compressed descent and the cables between electrical cabinet and machine;, All the documentation including the electrical diagrams is present (in French), Punch type: D, Weight (kg): 4500 , Cadence / hour: 43 000 - 350 000, Compression (kN): 100, Precompression (kN): 10, Maximum tablet dimensions (mm): 25,40, Outer diameter of die (mm): 38,10, Matrix height (mm): 23,81, Punch diameter (mm): 25,40, Die outer diameter (mm): 38,10
distance between columns: 300 mm table length: 3550 mm table width: 190 mm table height: 800 mm distance between columns: 3230 mm column arm: 300 mm weight of the machine ca.: 12,5 t dimensions of the machine ca.: 1600 x 3800 x 2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 4,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 24 Kg dimensions: 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, ...
pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 kN stroke: 40 mm throat: 73 mm Working height from to: 60 - 150 mm table surface area: 115 x 70 mm weight of the machine ca.: 10 Kg .Toggle lever hand press SPECIAL OFFER! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm daylight longitudinal/sideways: 1300 /450 mm dayligth: 900 mm tank capacity: 75 l liter capacity: 22 l feed down: 6,9 mm/sec feed up: 12,6 mm/sec Motor output: 7,5 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,0 x 0,75 x 2,8 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 26,0 kN stroke: 60 mm throat: 110 mm Working height from to: 70 - 250 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 46 Kg dimensions: 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 34,0 kN stroke: 40 mm throat: 130 mm Working height from to: 80 - 240 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 80 Kg dimensions: 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t stroke: 200 mm table-size: 450 x 450 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 150 mm total power requirement: 1,1 kW : 150 x 6 mm weight: 0,4 t dimensions: 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t stroke: 400 mm table surface area: 920 x 540 mm Motor output: 2,2 kW liter capacity: 9,0 l dayligth: 800 mm tank capacity: 31 l daylight between the columns: 920 x 300 mm weight of the machine ca.: 0,725 t dimensions of the machine ca.: 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: - t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
