129,676 used machines on RESALE, but how to find them? Machine Search
AGFA / Siemens X-ray imaging workstation DX-D 500 (digital) with the following system components: Generator Siemens Polydoros IT 80 Tube Siemens SV 150/40/80 HC 0.6/1.0_Bj. 2018 Vertical tripod Siemens Vertix T Fa. Siemens 2x detector VARIAN 4343R CSi_43x43cm Workstation • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • T ...
Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg
Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...
Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511
Inv. Num. : 6336 Type: YCK-2A Producer: Beijing YC Digittech Created: 2013 Parameters: Compressive force: 1500 kg Material Dimensions: 85.6x54 mm Machine height: 1600 mm Machine length: 700 mm Machine width: 1100 mm Machine weight: 600 kg Productivity: 3500 cards/h
more available DIGI Fully Automatic Stretch Film Packaging Machine Type AW-5600 or AW 4600 Year of construction div. We will be happy to provide you with a package price offer if you accept several machines!
Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler DIGI AW-5600e AT POP The AW-5600 AT is a high-performance automatic weighing, packaging and labeling system for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It saves film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and in a visually appealing way. Technical specifications Wrapper DIGI AW-5600e AT POP 220-240V / 50-60 Hz / 2.2 kW suitable for Food-Tainer bowls Capacity up to 36 packets/min Film width: 300 - 450 mm Year of construction: 2018 Total weight approx. 450 kg DIGI award system 3 built-in printers for product labels and promotional labels ...
AvK Synchronous Generator DIG 120 h/4 1370 KVA 10500 V 75 A 50 Hz, 1500 rpm. Accessories: - 2 sets Winding PT100 - DM110 Digital Regulator NEW Condition (NEW)
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AvK Synchronous Generator DIG 110 i/4 1080 KVA 10,000 V 62 A 50 Hz, 1500 1/min. Accessories: - 2 sets Winding PT100 - Cosima N+, QPF, CUN Completely overhauled with new bearings.
Fully automatic stretch film packaging machine with weigher & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600AT II The AW-5600 AT is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It conserves film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and in a visually appealing way. Technical data Wrapper DIGI AW-5600AT II 220-240V / 50-60 Hz / 2.4 kW Suitable for Food-Tainer bowls Output up to 36 packets/min Package Size: Width: 130 to 380 mm/5.1-15 inches Height: 10 to 130 mm / 04.-5.1 inches Depth: 80 to 254 mm/3.1-10 inches The maximum packaging sizes also depend on t ...
Morgana Digifold Folding Machine Built in 1995 The counter is not working
Fully automatic stretch film packaging machine with weigher & labeler Packing Plant / Wrapper + Labeler DIGI FX-3600 XL Specifications 380-400V / 50-60 Hz / 1.5 kW Suitable for Food-Tainer bowls Output up to 15 packets/min Film width: 350 - 500 mm Max. tray dimensions: L x W x H 350 x 230 x 130 mm Marking system: with thermal labels Max. dimensions of the Thermo Label: 75 x 105 mm Year of Make: 2007 Total weight approx. 200 kg DIGI labeling system 3/6 kg, min 20g, e=1/2g Calibrated until 31.12.2023 Function tested Sale as a defect due to age Stock machine, immediately available! A proper invoice will be issued! Condition & accessories see original pictures! If you have any questions, email or call. 03423-706493
Altarfalztasche (Fensterfalztasche) / Gateway Buckle Heidelberg 82 Baujahr / Year 2010 - Serial-No. XX262 Lichtschranke / Light sensor OMRON Motorische Formatverstellung / Motorized format adjustment Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Saddle Stitcher With brochure function Counter: 1.9 million Connecting Bridge DSF-DSC Duplo LDR , 2017 2 CollationTower Duplo DSC – 10/60, 2020 Cover Feeder Duplo DSF-CFL, 2016 Counter Duplo DKT-K, 2017 Head and foot trimming Duplo DKT-200, 2017 Front Trimmer Duplo DBMS-T, 2017 Stitcher Duplo DBMS-S, 2017 Folder Duplo DBMS-F2, 2017 In production Available: immediately Located: Germany
Controller, programmer, program controller -Manufacturer: SBF, converter dimmer with button connection with base plate -Dimmer: Type PWM -Voltage: In: 24V DC 17-32V -Number: 9x controllers available -Price: per piece -Dimensions: 120/80/H40 mm -Weight: 0.1 kg/pc.
Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter
Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...
Mixer Falterbaum type FAMIX 30.000 Turbo Digi More components mixer Year of manufacturing: 1993 with Siemens S7 PLC Incl. touch panel Completely mounted on stainless steel base frame Incl. measurement and control technology for CO2 Output maximum 30,000 ltr. /h 5-component mixer
Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0
Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0
Manufacturer: Digicoater , Type: 3080, Year: 2005, Control: Siemens C 7, Work piece width min-max mm: 400 - 3.000, Min.-max. workpiece length in mm: 8.000, Min.-max. workpiece height in mm: 100, Spraying heads - total: 4, work piece detection: yes, Spraying stations: 4, Feeding speed m/min: 1,2 - 4,8, Electrical power consumption kW: 6,4, Required space L x W x H mm: 12.000 x 5.000 x 1.600, Year :2005
Manufacturer: Domino Digitaldrucker, Type: A 300, Year: ca.2006, FREETEXT1: inkl. Düsebhalter und Düsen, Year :ca.2006
Separator - Pulsotronic M-Pulse digital 25 (4 pcs.) Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Description KEBA - DIGITAL OUTPUT MODULE Type: E-16-DIGOUT PLUS D1456E
Description KEBA - DIGITAL OUTPUT MODULE Type: E-16-DIGIOUT PLUS D1456E
Description KEBA - DIGITAL INPUT MODULE Type: E-32-DIGIN D1321F-1
Description KEBA - DIGITAL INPUT MODULE Model: E-32-DIGIN D1321E
: 35 (600) mm : 35 (900) mm L-beam: 50 x 50 x 5 (800) mm T - beam - web outwards: 60 x 7 (600) mm Axis diameter: 50 mm work speed: 4,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible.
MORGANA Digifold Pro By combining creases and folds in a single unit, a highly productive and user-friendly mobile finishing center is created. Perforation is also possible, which optimally rounds off the range of applications. With a speed of up to 6,000 sheets per hour and a maximum format of up to 900 x 358mm, the new Digifold Pro is even more flexible in use. A large touch-screen display makes it easy to operate the Digifold Pro, as well as all other machines from the Pro generation. Versatility The Digifold Pro can be used in three different ways, depending on your needs: As a creasing machine As a folding machine As an integrated creasing and folding machine that performs both functions in a single operation. Feeder: Suction feeder pulls paper from below Paper size: max. 900 x 358 mm // Paper size min. 210 x 140 mm Paper weight max. 400 g/m² // Paper weight min. ...
used
Cutting machine IDEAL 5221-05 EP, machine number 2848081, year of manufacture 2008, in good condition, immediately available Rsbr Sbovt Rt Ao Nwkou If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Dosing unit - Digicolor / Like new (2 sets available) Year of construction: Location: Lodz, Poland Description: Screw dosing unit, volumetric with vacuum vessel Adjustment of the dosing speed Conveyor Price: On request
Separator - Pulsotronic M-Pulse digital 25 (4 pcs.) Year of construction: Location: Lodz, Poland Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Guillotine Shears, Metal Shears DIGEP Type OL 3Workshop Overhauled Guillotine ShearFabr. No. 1312 Year of construction 1977Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mmCutting thickness at 450 N/mm² 3 mmSingle back gauge 500 mmStand projection 200 mmCutting angle 2 stroke rate at full cutting length max. 50 strokes/min. Working height 860 mmMotor power 2.2 kWNew connection 380 Volt, 50 Hz- LED cutting area-Lighting- Simple backgauge with manual adjustment- Mechanical
Two semi-automatic angle welding machines Minipack with L-seal for shrink film are available. Packaging capacity: 900 packages/min, sealing bar dimensions X/Y: 840mm/600mm, max. film roll diameter: 300mm, max. film roll width: 800mm, working table height: 930mm, machine dimensions X/Y/Z: approx. 2100mm/1000mm/1250mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible.
Height=1.465 m, Overall length= 1.535 m, Overall width= 1.43 m, Net weight= 445 kg,
Height=1.62 m, Overall length= 0.95 m, Overall width= 0.86 m, Net weight= 300 kg,
Height=1.465 m, Overall length= 1.535 m, Overall width= 1.43 m, Net weight= 445 kg,
Height=1.465 m, Overall length= 1.535 m, Overall width= 1.43 m, Net weight= 445 kg,
cutting diameter: 255 mm saw band length: 2750 x 27 x 0.9 mm capacity 90 degrees: flat: 300 x 200 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 170 x 120 mm capacity 60 degrees: round: 110 mm capacity 60 degrees: flat: 110 x 150 mm table height: 900 mm Control: konv. cutting speed: 36 m/min clamping range: 305 mm total power requirement: 1.5 kW weight: 440 kg range L-W-H: 2000 x 1200 x 1950 mm Features: - Electro-hydraulic metal band saw - With miter adjustment 45° right / 60° left - Manual saw cut (with manual lowering) - Hand switch on the saw frame (saw blade on/off) - Electro-hydraulic material clamping (close/open switch) Includes handwheel for vise adjustment - Handwheel for manual saw blade tensioning - Coolant system - Emergency stop button at the front - Operating instructions (English) The data for this ad was created with ModulMWS - the software solutio ...
x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 320 mm feed:: H 80 - 830 / V 23-625 mm/min. turning speeds: H 35 - 1500 / V 45 - 1660 U/min distance spindle /table: H 30 - 430 / V 210-610 mm rapid traverse: Z Achse 750 mm/min throat: 305 - 805 mm T-slots: 3 x 14.0 mm table - swivable +/-: -45 / +45 ° workpiece weight: max. 300 kg coolant pump: 25.0 L/min. total power requirement: 7.6 kW weight of the machine ca.: 1540 kg range L-W-H: 1840 x 1830 x 2050 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system Huron, adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gea ...
maximum number of results exceeded
please refine your search
