dig used for sale

Heating block / mineralizer BLOC DIGEST 12 + RAT 2 SELECTA control unit; ; Reference: BLOC DIGEST 12 digestion unit; For 12 samples; Automatic precision dry bath thermostat for 12 reaction samples, 45°C to 450°C; ; RAT 2 control unit for standardized COD mineralizer; ; With:; 18 digestion tubes; With smoke collector (be careful, 2 of them are chipped); ; In excellent condition; ; Internal reference: FA-2158; Auction-ID: A1-50994-1082

Screen size: 75 inches, with rollable additional frame, Fabr. NEOMOUNTS

32 spades Hydraulic lifting system for Farmtec milling rotary harrow or harrow roller Centrally driven switchable harrow roller Auction-ID: A3-46111-9392

Measuring range: up to 1,000 mm High-precision vertical measurement Digital Measurement System Vertical movement of the column probe Height measurements and height differences Diameter and centre distance measurements Groove measurements and geometric positions Zero/Relative Measurement Function Digital display with control keypad Use on control marble Manually moving the device on the measuring plane Power supply with mains supply Marble dimensions, 1200 × 800 mm Auction-ID: A1-51172-116

Spectral range: 250 to 1,000 nm Power range: 1 mW to 12 W Irradiance range: 5 mW/cm² to 60 W/cm² Accuracy: ±5% typical, ±10% maximum Power and irradiance measurement Automatic selection of the measuring range Absolute and relative measurement mode Automatic light guide detection Memory of measuring points Connection for external sensors Communication with PC Powered by 3.6 V lithium battery Supplied in a case with adapters Alluris FMI-S20 Maximum capacity: 500 N Resolution: 0.1 N Tolerance: 0.2% of rated capacity Measurement of tensile and compressive forces LCD Digital Display Display of the instantaneous value and the peak value Units of Measurement: N, kgf and lb Automatic calibration Bidirectional strain gauge load cell Overload protection M6 threaded measurement fitting Integrated photovoltaic power supply Cast aluminum ho ...

The 1000 kg hook scale is a professional device designed with the most demanding users in mind. Its robust construction and high accuracy (Class III) make it an indispensable tool in industrial and logistics environments. The large 1.12-inch backlit LCD display ensures easy reading of the results, even in difficult lighting conditions. The measuring range of the scale covers values from 0 to 1000 kg and the battery protection function signals low charge with an \"LO\" message, ensuring an extended and safe runtime Auction-ID: A7-50799-12

Equipped with 3-point connection; approx. 30 cm working depth Auction-ID: A1-47396-1068

Yanmar sv20 mini excavator with hydraulic cw05 quick change demolition sorting function Neat clean well-functioning machine with low hours Auction-ID: A3-46114-17369

The 1000 kg hook scale is a professional device designed with the most demanding users in mind. Its robust construction and high accuracy (Class III) make it an indispensable tool in industrial and logistics environments. The large 1.12-inch backlit LCD display ensures easy reading of the results, even in difficult lighting conditions. The measuring range of the scale covers values from 0 to 1000 kg and the battery protection function signals low charge with an \"LO\" message, ensuring an extended and safe runtime Auction-ID: A7-50799-212

with manual and accessories THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-173

The 1000 kg hook scale is a professional device designed with the most demanding users in mind. Its robust construction and high accuracy (Class III) make it an indispensable tool in industrial and logistics environments. The large 1.12-inch backlit LCD display ensures easy reading of the results, even in difficult lighting conditions. The measuring range of the scale covers values from 0 to 1000 kg and the battery protection function signals low charge with an \"LO\" message, ensuring an extended and safe runtime Auction-ID: A7-50799-112

VELP SCIENTIFICA - JLT4 Flocculation Tester Auction-ID: A1-51527-215

Neolt NeoWeld is the series of pulse welding machines designed to meet the production needs of sign-makers and professionals in the digital printing, indoor/outdoor advertising and POS communication. The welding pulse technology choosed for NeoWeld stands as a substantial alternative to the high-frequency, ultrasonic and hot air technologies, offering a number of indisputable advantages from the technical, operational, economical and dimensional point of view. • Heating length about: 1300mm • Heating width about: 25 mm • Working pressure: 220 kg./cm • Electrode temperature: from 70° to 250° C • Air pressure: 7/8 Bar • Dimensions: L1500 x W1300 x H1400mm. • Machine Weight: 433 Kg. / 954,6 Lbs. • Height of work table: 1000 mm. • Power: 400V 50/60Hz • Power supply: 400V 50/60Hz • Consumption: about 6 kW. plug CEE (red) 16A 3P+T 400V 50/60Hz • Power supply: 220/240V ...

Collin DigiPointer 8008 – ENT Surgical Navigation System Navigation system dedicated to sinus, otoneurological and maxillofacial surgery: patient scanner loading, analysis (virtual navigation, 2D/3D measurements, 3D reconstruction), intraoperative navigation and patient record management. Manufacturer: Collin Model: DigiPointer 8008 Configuration: workstation with software, keyboard and mouse, stylus / sensors / reference, monitor and trolley, user manual Condition: very good condition, functional tested Auction-ID: A1-51275-49

Kodak OREX PcCR 1417 ACL4 X-ray Scanner Manufacturer: Kodak Model: OREX PcCR 1417 Up to 41 cassettes per hour Dimensions: 733 × 655 × 340 mm Configuration / Included accessories: Laptop, Software and license key, Cables and charger, CR 14x17 cassette, CR 24x30 cassette Power supply: 100–240 V – 50/60 Hz Weight: approx. 40 kg Condition: Good working condition Auction-ID: A1-51275-119

Yamaha Rivage PM5 – Digital Mixing System: CS-R5 Control Surface + DSP-RX Motor with HY144-D Dante Board Manufacturer: Yamaha Model: Rivage PM5 (CS-R5 Surface + DSP-RX Engine) Purchase: Purchased new on 24/06/2021, first hand Use: 2 to 3 times per year Firmware: V6.71 (console and DSP) DSP-RX engine 120 input channels 48 mix buses + 24 dies HY144-D Dante board installed Mounted in a 19\" wheeled rack flight case with power distribution (Samson PowerBrite PB11 conditioner + power strip), lock drawer and wiring CS-R5 control surface 3 touch screens 8 mic/line inputs and 8 local outputs Supplied in its own wheeled flight caseComposition of the lot: CS-R5 surface, DSP-RX motor with HY144-D board, 2 wheeled flight cases, electrical distribution and wiring. Sold as shown in the photos. Disassembly and loading are to be arranged by the buyer, who provides suitable transport and  ...

This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability. Auction-ID: A1-40333-138

BIOSPACE Kiosk (InBody Touch) NEW Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-116

The digital retinograph is intended to observe and record images of the retinal fundus through the pupil Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See Gene ...

PIXIENCE - CAMERA C-CUBE Dermoscope - SN C-CUBE-102516511 Good working condition and cosmetics State-of-the-art digital video dermoscope designed for dermatology, clinical research and validation of dermocosmetic claims Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go thr ...

Idexx CR 1417 Digital X-ray Machine Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-140

Set of 80 HD digital audio-video cables – 1.5 m Set comprising 80 cables for the digital transmission of images and sounds in high definition. Length: 1.5 metres per cable. Important information – to be read before bidding Goods from discontinued series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Electrical items not tested: their operation has not been verified. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her appreciation of the lot. Auction-ID: A1-51086-284

2FOSS TECATOR SCRUBBER P/N 10013505 + DIGESTOR AUTO 20 ,untested equipment, bad condition, display of digestor hs THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the stan ...

Fidia Rotation Head with C-Axis Type: Rotation head with C-axis Manufacturer: Fidia Model: 212 OR 218 Digit Serial number: Not visible Application: High-speed machining and multi-axis operations Rotation axis: C-axis integrated Rotation speed: Between 15,000 and 60,000 rpm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-56

This EVOS microscope is ideal for laboratories wishing to integrate cell and tissue culture imaging analysis, cell confluence determination, stem cell growth and differentiation, as well as developmental biology and tissue sections. THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-65

50/60 Hz standalone active noise cancellation system DIGITIMER D400 + NL900D + CED 1401 MICRO3 3701 THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-175