diesel pump test used for sale

Waters Pump Control Module HPLC; ; Waters Pump Control Module; ; Internal reference: FA-943; Auction-ID: A1-50994-1076

Mobile slurry separator EYS SP600HD Demonstration/used machine Year of manufacture: 2023 Operating hours: 149 h Separator power: 5.5 kW Speed: 11.7 rpm Screen basket: Ø 258 mm Max. TS content: up to 40 % Progressing cavity pump 35-6LS, 5.5 kW Flow rate: 5.6–29 m³/h Mobile, height-adjustable frame with forklift pockets Stone Trap / Calming Tank Complete piping and tubing Control cabinet with frequency converter Pressure-dependent pump control Dry-running protection and thermal protection Dimensions frame: approx. 3000 x 1800 x 1250 mm Auction-ID: A1-50372-1140

208 cc displacement; 3800 RPM; 7.5 meters maximum suction level; 28 meters maximum head; 3.6 liter gas tank; equipped with sieve, couplings, hose clamps; manual; 3903 Auction-ID: A1-50866-61

Delivery height: 155 m, Impeller diameter: approximately 470mm. Connection: PN16. Auction-ID: A1-50340-31

Capacity: 80 m3/hour, Head: 54m, 2950 revolutions per minute. Auction-ID: A1-50340-2

Hammelmann HDP 164 Pompe Pression : 2 400 bars Débit : 35 l/min Moteur : Volvo Penta Différents accessoires disponibles : pièces détachées, tuyaux, câbles, arme, etc. Machine toujours entretenue et surveillée Factures d’entretien disponibles Équipement prêt à travailler

Power: 0.315 kW, Temperature on type plate: approx. 20 °C, ATEX marking: II 2G c T1–T5. Includes: wooden box, size: 1000x800x950mm. Auction-ID: A1-50340-17

Pallet not included. Decommissioned KNF Neuberger pump VDE 0530 LaboTech Retschmix TM01 Vortex Mixer Stnart Platform Rocker STR6 Laboratory Mixer Auction-ID: A1-50846-182

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46381-432

Capacity: 52 m3/hour, Head: 50m, 2950 revolutions per minute. Auction-ID: A1-50340-97

Capacity according to the SC series: approx. 1300–2000 m³/hour, Shaft length: 16cm, diameter: 7.5cm. Connection: DN150. Auction-ID: A1-50340-18

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Upper flange PN-16. Auction-ID: A1-50340-7

3-phase three-phase motor see photos for more details Auction-ID: A7-50677-1145

Equipped with Honda 4hp petrol engine, portable Auction-ID: A1-50903-20

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Upper flange PN-16. Auction-ID: A1-50340-5

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Auction-ID: A1-50340-62

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Auction-ID: A1-50340-6

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Auction-ID: A1-50340-60

Delivery height: 54m, Impeller diameter: approx. 470mm. Connection: PN16. Auction-ID: A1-50340-76

Maximum pressure: 1.2 bar, Maximum temperature: 80 °C. Auction-ID: A1-50340-118

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Auction-ID: A1-50340-59

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46381-427

Capacity: 372 m³/h, Media temperature: 70 °C, Power: 12 kW, NPSH: 2,6 m, Speed: 960 rpm, Weight: 364kg Auction-ID: A1-50340-53

Capacity: 15 m³/h, Delivery height: 165m, Speed: 2.900 rpm, NPSH: 1,8 m. Auction-ID: A1-50340-4

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Auction-ID: A1-50340-63

• Lot of 2 submersible water pumps • Motor 1,50 kw each • Operating conditions of these machines: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-338

Mounted Delvano agricultural sprayer, equipped with a main tank of about 1,000 liters and folding side booms, with an estimated working width of about 12 meters. Features and equipment: Brand: Delvano Main tank capacity: approx. 1,000 L Folding spray booms Estimated working width: approx. 12 m PTO driven pump Cardan shaft present 3-point hitch Multi-channel valve Control of multiple spray sections Control pressure gauge Numerous hoses and lines Clean/auxiliary water tank Product Incorporator/Mixer Flushing circuit Robust metal chassis Traditionally designed mechanical sprayer, with no visible control computer. Booms fold sideways to reduce space for storage and transport. Used agricultural equipment kept safe, showing signs of use, dirt, discolouration of the tanks and surface wear of the chassis and the various components. Operation not tested. Sold in its curren ...

Capacity: 20m³/h, Head: 155m, Speed: 2.900 rpm, NPSH: 2.5 m. Please note! No motor on this pump. Auction-ID: A1-50340-11

Capacity: approx. 65 m³/h, Delivery head: approx. 61 meters, Speed: 2900 rpm Auction-ID: A1-50340-89

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Upper flange PN-16. Auction-ID: A1-50340-1

Capacity: 162m3/hour, Head: 130m, 2900 revolutions per minute. Auction-ID: A1-50340-94

Version with elongated stator, rotor/shaft construction and flange connections. Including various drive and coupling parts, 1 pump equipped with metal/stainless steel pump housing. Auction-ID: A1-50340-61

Stock number: PC1388, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: On leg stand, Motor: 5.5 kW - 380 Volt - 2910 rpm, Theoretical capacity: Max 60,000 l/h, Stage: 1, Working pressure : Max 3.8 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2

Stock number: PC1389, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: On leg stand, Motor: 5.5 kW - 400 Volt - 2915 rpm, Theoretical capacity: Max 37,000 l/h, Stage: 1, Working pressure : Max 2.7 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2

This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line., Product Pump: For viscous Products , CIP: Special CIP Pump on the skid , Stainless steel: Yes , Electricals: 3 phase / 400v /50-60hz , Available: Immediately

Busch high-flow, rack-mounted industrial vacuum pump Brand: BUSCH Type: R5 RA 0250 D 5ZI CUZZ Oil: ISO VG 100 Oil Quantity: 6.5 L Weight: 250 kg Configuration: Rack-mounted industrial vacuum pump assembly Auction-ID: A1-51172-13

2010 Lowara SHS 32-125/11/A – Centrifugal pump 9-24 m³/h This used LOWARA SHS 32-125/11/A centrifugal pump is a reliable and efficient solution for liquid transfer operations in the food, wine or industrial environment. Equipped with a 1.1 kW three-phase motor, it offers a flow rate of 9 to 24 m³/h for a head of 19.4 to 9.8 m. Compact, robust and made in Italy, it is an immediately operational equipment to complete or strengthen a pumping installation while controlling the investment. Technical data Brand: LOWARA Model: SHS 32-125/11/A Year: 2010 Type: centrifugal pump Flow rate: 9 to 24 m³/h HMT: 19.4 to 9.8 m Motor power: 1.1 kW Motor: three-phase 3~ Power supply: 230/400 V – 50 Hz Current: 4.52 / 2.61 A Motor speed: 2875 rpm Protection class: IP55 Insulation class: F Equipment sold loaded on truck: dismantling and loading are carried out by the seller, at an additional cos ...

Grundfos CR 16-30 – Vertical multistage pump 16 m³/h General description Vertical multistage in-line pump for the transfer of clean liquids. Industrial design recognized for its reliability, hydraulic efficiency and compactness. Model suitable for continuous applications in agricultural, vineyard or industrial environments. Manufacturer identification Brand: Grundfos Series: CR Type: CR 16-30 Manufacture: Denmark Hydrolic characteristics Nominal flow rate: 16 m3/h Pressure head: 34.4 mCE Rotational speed: 2,000 rpm Maximum permissible pressure: 16 bar Installation direction: Vertical Inlets/outlets: In-line flanges (opposite suction/discharge) Construction Stainless steel pump body (typical CR series) Vertical multistage stages Cast iron base with fixing holes Longitudinal tie rods Grundfos standard mechanical seal Vertically mounted electric motor (three-phase - motor plate ...

Enoveneta – Pigtail pump 18 t/h This ENOVENETA pigtail pump with a maximum capacity of 18 t/h is designed for the transfer of harvests and loaded products in the wine and agri-food environment. Its configuration on wheels, combined with pumping technology adapted to the cellar transfer phases, makes it a simple, robust and immediately usable solution to complete an existing installation. Technical data Pigtail pump Brand: ENOVENETA Bohers outlet Ø 120 mm Max capacity: 18T/h Set on wheels Dimensions Total length: 2100 mm Total width: 970 mm Total height: 1000 mm Width: 900 mm Length: 7400 mm Depth: 400 mm Equipment sold loaded on truck: dismantling and loading are carried out by the seller, at an additional cost indicated on the lot. Auction-ID: A1-51122-169

2010 Lowara SHS 32-125/11/A – Centrifugal pump 9-24 m³/h This used LOWARA SHS 32-125/11/A centrifugal pump is a reliable and efficient solution for liquid transfer operations in the food, wine or industrial environment. Equipped with a 1.1 kW three-phase motor, it offers a flow rate of 9 to 24 m³/h for a head of 19.4 to 9.8 m. Compact, robust and made in Italy, it is an immediately operational equipment to complete or strengthen a pumping installation while controlling the investment. Technical data Brand: LOWARA Model: SHS 32-125/11/A Year: 2010 Type: centrifugal pump Flow rate: 9 to 24 m³/h HMT: 19.4 to 9.8 m Motor power: 1.1 kW Motor: three-phase 3~ Power supply: 230/400 V – 50 Hz Current: 4.52 / 2.61 A Motor speed: 2875 rpm Protection class: IP55 Insulation class: F Equipment sold loaded on truck: dismantling and loading are carried out by the seller, at an additional cos ...

Bucher PM20 – Pigtail pump 20 t/h This BUCHER spiral pigtail pump with a maximum capacity of 20 t/h is designed for the transfer of harvests and loaded products in the wine and agri-food environment. Its configuration on wheels, combined with a helical pumping technology adapted to the reception of the harvest and the transfer of the pomace, makes it a simple, robust and immediately usable solution to complete a pumping installation in the cellar. Technical data Pigtail Helical pump Brand: Bucher Type PM20 Level sensor Boers outlet Ø 120 mm Max capacity: 20 T/h Wheeled assembly Dimensions Length: 2100 mm Width: 700 mm Height 900 mm Tank size: 650×650 mm, height 370 mm Equipment sold loaded on truck: dismantling and loading are carried out by the seller, at an additional cost indicated on the lot. Auction-ID: A1-51122-168

Air cooler with water circuit of 300 KW emergency diesel Engine cooling with cooling fins, fan and water circuit. Suitable for emergency diesel up to 300 KW engine power. previous use: Henschel Diesel 304 KW Application: Cooling of emergency diesel up to 300 KW Serial Number: – Type: Air Cooling with Water Circuit Year of Make: 1962 Hours: 769 Dimensions [m]: 1.4 x 1.1 x 1.6 Weight: 441 kg

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Different MTU - engines 8 V 396, 10 V 396, 12 V 396, 16 V 396 12 V in 2000, 16 V in 2000 12 V 4000, 16 V 4000 many spare parts:Kurbelwellen, cylinder heads, injection pumps, Turbos etc. Anew and used different year of construction different hours generator engine: We also build around to the ship engine! Inquiries please with full information of the type them need. Please, also engine. No. give.

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

2 piece "Backlog from series production" Capacity: 330 kVA / 264 kW plus 10% overload Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-353 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: 550 l Switchgear / Starter: automatic switchgear for parallel operation Battery voltage / capacity: 24 V / 2 x 143 Ah Ggenerator switch: Yes Power switch: No Automatic: Yes - Kuhse Accessories: weather protection cover, Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm