diesel power used for sale

Key data: 4000 kN

Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Handlebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authorized s ...

Manufacturer : ERSA Model: Powerflow PRO Type: Wave Soldering Machine Condition: Used Key Specifications - Transport frame width: 400 mm - PCB clearance height: 100 mm - Pre-heating length: 1500 to 2000 mm (configurable) - Heating configuration: 2x medium wave + 1x short wave - Flux system: ERSA motorised spray flux system, 10-litre standard container - Solder pot: lead-free, enamelled titanium, approx. 525 kg lead-free solder capacity - Solder angle: 7 degrees - Compatibility: lead-free and leaded solder processes - Control system: PC control, Windows 10 - Software: Ersasoft 5 with MES interface capability - Certification: CE compliant Find more here - / Contact us at -

open-circuit voltage: 280 - 320 VDC current intensivity: 30 - 80 A output voltage: 140 VDC cutting medium: Air / Nitrogen total power requirement: ca. 11,2 kW weight of the machine ca.: 40 kg dimensions of the machine ca.: 0,90 x 0,35 x 0,50 m Plasma Cutting Machine HYPERTHERM - Hypertherm Powermax 1100 incl.HYPERTHERM RT 80 hand torch - Recommended cutting capacity: 22 mm - Maximum cutting capacity: 29 mm - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINIG moulder, type Powermat 1500, Manufacture year 2016, Machine specifications:, - Planing width 20 - 310 mm, - Planing height 10 - 200 mm, - Cardan feeding, motor 9.5 kW, - Feed speed 5 – 40 m/min, Spindle layout:, 1. Horizontal bottom spindle, 15 kW, 2. Vertical spindle right, 15 kW, 3. Vertical spindle left 15 kW, 4. Horizontal top spindle, 22 kW, 5. Horizontal bottom spindle, 15 kW, 6. Horizontal top spindle, 30 kW, 7. Horizontal bottom spindle, 15 kW, 8. Universal spindle 7.5 kW, - Powerlock for spindle 1 - 8, - CNC positioning for spindle 1 - 8, - Spindle 1 - 7 with 8000 rpm, - Memory Plus touchscreen controller, - Surface table 1200 mm, - Feeded table rollers, - Waxalite pump, - Complete with tooling and accessories

Working width: 230 mm Working height: 160 mm control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The original build year of this machine was 1998. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. The spindle bearings were replaced with high-precision ball bearings 14 days ago. The spindle is now running with 0-1 µm accuracy and is very quiet. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 16 (warming-up program) Measu ...

The original build year of this machine was 1999. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Step Tools Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 4 (step tools) Software package 6 (woodworking tools) Software package 8 (taps) Software package 16 (warming-up program) Software package 32 (contou ...

Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives

Fiber laser cutting machine Type: Laser Genius Fiber Manufacturer: Prima Power Year: 2017 Machine hours: 22151 Working area: 4000 x 2000 mm Resonator power: 6000 W Cutting table load capacity: 1850 kg Positioning accuracy of X and Y axes: 0.03 mm Installed power: 56.3 kW Minimum air inlet pressure: 7 bar Compressed air consumption (laser + suction): 30 Nm3/hour Maximum sheet thicknesses: structural steel: 25/20 mm stainless steel: 20/12 mm aluminum alloy: 20/6 mm brass: 10/10 mm copper: 10/8 mm Machine in good condition, under power Find more here - / Contact us at -

Number of boring spindles: 7 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 30 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hypertherm plasma cutter type POWERMAX 85 in very good condition!

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg

Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Brief Summary: ---------------------------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ---------------------------------------- ...

·, - Weight: approx. 35.0 t, · Setup time: about 0.5 h, · Max. task piece size: about 800 mm, · Inlet opening: 1,200 × 700 mm, Throughput: dependent on the material, · Year of construction: 2012, · Operating hours: approx. 8,000 h

The 2012 Prima Power Platino 1530 is a professional-grade CNC laser cutting machine designed for high-precision sheet metal fabrication. Manufactured by the Italian company Prima Industrie (now Prima Power), the "1530" designation refers to its working area of 1,500 mm x 3,000 mm (roughly 5´ x 10´). Find more here - / Contact us at -

Mobile Wheel Screening Plant Powerscreen Chieftain 8 x 4 = Manufacturer Powerscreen mobile screening system on wheels, mobile, semi-trailer Screen dimensions 2,438 x 1,219 mm Screen Box: Double Decker Eccentric Screen Box Throughput: approx. 80 - 100 t/h

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 670 mm   width: 480 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 4500 mm   space requirements -front/back-: 3053 mm   total height: 2500 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz POWERJET T4-V TWIN continuous cleaning system – powerful and reliableA high-quality POWERJET T4-V TWIN industrial continuous cleaning system from renowned manufacturer LPW Reinigungssysteme GmbH is available for sale.The system is ideal for the efficient cleaning, rinsing, drying and preservation of workpieces in series and batch production.Two working chambers for high throughput and flexible processesMulti-stage cleaning, rinsing and drying process including vacuum and hot air dryingSuitable for batch weights up to 200 kgFive free ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

General SKU418U1309 MakeGenser LocationBarneveld CEcheck TypePowervap-20-EX Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information No.180100 Year of construction02-2017 Mounted on framecheck Mounted on wheelscheck With switchgearcheck ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably. - Computerized reflux and standby option - The rotating flask floats freely in the heating bath  ...

General SKU418U1308 MakeGenser LocationBarneveld CEcheck TypePowervap-20-EX Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information No.170099 Year of construction02-2017 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,5x0,9 m Total height2 m Weight400 kg ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate of factor 5 compare to other rotary evaporators. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliab ...

Kepco JQE 100-5 M Power Supply Power Supply Laboratory Power Supply Power Supply Auction-ID: A7-45427-95

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens power supply unit -Type: 3RX9307-1AAOO -Input: 102-132 V AC/195-253 V AC -Output: 30 V DC/4 A -Price: per piece -Number: 5 pieces -Dimensions: 110/75/H135 mm -Weight: 1.2 kg/piece

Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power power supply -Type: 6EP1 331-2BA10 -Input: 120/230V 50/60Hz -Output: 24VDC 0.5A -Number: 1 piece available -Price per piece -Dimensions: 110/100/H30 mm -Weight: 0.1kg/pcs

Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 10 power supply -Type: 6EP1 334-1SL11 -Input: 120/230V 50/60Hz -Output: 24VDC 10A -Number: 1 piece available -Price per piece -Dimensions: 110/100/H30 mm -Weight: 1,3kg/pcs

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: ifm electronic, AS-i Power Supply -Type: AC 1216 -Number: 2x module available -Price per piece -Dimension: 105/50/H130 mm -Weight: 0.5 kg/pc.

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

power converter, power supply, power pack, switching power supply -Manufacturer:Siemens, SITOP Power 10 -Type: 6EP1334-1AL11 6EP1 334-1AL11 -Input: 120/230 V 50/60 Hz -Output: 24 V DC 10 A -Quantity: 1 piece available -Price: per piece -Dimensions: 220/130/H60 mm -Weight: 1.1 kg

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, DC Power Supply -Type: PSL C242 -Power: 38 VA -Dimensions: 80/55/H110 mm -Weight: 0.8 kg

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U75024 -Power: 750 VA -Dimensions: 225/175/H215 mm -Weight: 17.3 kg

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U1K224 -Power: 1200 VA -Dimensions: 250/175/H215 mm -Weight: 19,2 kg

Hydraulic power unit BOSCH REXROTH Year of construction approx. 1970Operating pressure Nominal capacity: 50 barOperating pressure: max. 70 barVolume flow: approx. 40 litres/min. Tank capacity: 240 litresEngine power: 4 kWNee connection: 380 volts, 50 Hz- 1x electric hydraulic valve BOSCHPlating requirement length: 1020 mm, width: 610 mm height: 1000 mmown weight: approx. 170 kg; used

Hydraulic Power Unit, Hydraulic Power Unit BOSCH REXROTH Order No: 983885 Year of Manufacture 1982Tank Capacity: 150 LitresOperating Pressure: 60 bar Nominal Pressure / Max. 100 barVolume Flow: 20 Litres/min. Motor power pump : 3 kWNetz connection: 380 volts, 50 Hz.- 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type 4WE10D10OFLG24NZ4- 1 piece pressure accumulator- various throttle valves, pressure regulators and

Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Eltako, Wide-range switching power supply -Type: WNT12 -Quantity: 1x switching power supply included -Dimensions: 90/75/H60 mm -Weight: 0.2 kg

https://www.behringer.com/product.html?modelCode=0601-ADG Sale with the following accessories: 1x IEC connection cable C13 Auction-ID: A7-45172-50

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Escherich high-voltage power supply Power Unit 55 FC -Type: PU55 FC-230V / ES023 -Voltage: 230V/50-60Hz -Quantity: 2x power supply available -Price: per piece -Dimension: 235/120/H140 mm -Weight: 2.9 kg/pc.

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact, Power Supply -Type: CM 90-HP-230AC/24DC/2 -Item no.: 29 43 70 9 -Quantity: 2x power supply available -Price per piece -Dimension: 145/90/H80 mm -Weight: 2.3 kg/pc.

Converter, power converter, power supply, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply, power supply module, power supply module -Manufacturer: Puls, Power Supply 3-Phase, 48V, 20A, 960W -Type: XT40.481 -Number: 1x module available -Dimensions: 160/95/H135 mm -Weight: 1.5 kg

Converter, power converter, power supply, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply, power supply module, power supply module -Manufacturer: Puls, Power Supply 3-Phase, 48V, 10A, 480W -Type: QT20.481 -Number: 1x module available -Dimensions: 130/65/H130 mm -Weight: 0.9 kg