128,653 used machines on RESALE, but how to find them? Machine Search
Key data: 20 KW, 400 V
Remeha Gas Generator ELW 20-43 Gas electricity and heat generator from 2014 with 51,151 operating hours. Closed unit with control. 20 KWel x 1,527 rpm, 400 V/50 Hz. Model No.: ELW 20-43 R0048 Type: Gas Electricity and Heat Generator Serial number: SK0714A-ETWD-020136 AC generator (asynchronous): Weier DASGM 225/45 AC Generator Speed [1/min] 1,527 Engine: Toyota Power [KWel]: 10-20 Power [KWth]: 29-46 Voltage [V]: 400 Current [A]: 37.5 Frequency [Hz]: 50 Year of Make: 2014 Hours: 51,151 Weight unit [kg]: 880 Dimensions LxWxH [cm]: 165 x 105 x 200
Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...
Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available
used hydraulic power unit with accumulator, for the operation of a screen changer
Power supply model Trio PS/1AC/24DC/5, used but in very good condition.
EA Electro-Automatic EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Item Condition: Used 6.3A 2400W PD 7,00 Financing by our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory power supplies - new and used - in our shop! International shipping costs on request!
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 55 to PRESS TABLE table surface (left-right): 750 mm table surface (front-back): 450 mm SLIDE table surface (left-right): 400 mm table surface (front-back): 300 mm spigot hole diameter: 45 mm stroke: 50 mm stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS) slide adjustment: 70 mm stroke min.: 6 mm stroke max.: 50 mm stroke rate (min.): 50 /min stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm spac ...
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 40 to PRESS TABLE table surface (left-right): 650 mm table surface (front-back): 380 mm thickness of bolster plate: 60 mm opening in bed (diameter): 120 mm SLIDE table surface (left-right): 350 mm table surface (front-back): 250 mm spigot hole diameter: 40 mm stroke: 78 mm stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS) slide adjustment: 60 mm stroke min.: 8 mm stroke max.: 78 mm main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS total power consumption: 3.05 kW mains voltage: 400 V mains frequency: 50 Hz ...
Digital soldering station WELLER WXD 2 Power Unit, S/N 11438/120492, plus double soldering iron holder
Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging, 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-44803-263
Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-44803-47
Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-44803-246
Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging, 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-44803-97
Cordless Screwdriver METABO Powermaxx BS Year 2012, S/N 2126713103, Battery, Charger, Case
PRESS FORCES total force (nominal): 100 to PRESS TABLE table surface (left-right): 950 mm table surface (front-back): 660 mm thickness of bolster plate: 68 mm SLIDE table surface (left-right): 540 mm table surface (front-back): 450 mm spigot hole diameter: 60 mm stroke: 130 mm stroke rate (max.): 65 /min SLIDE (MECHAN. PRESS) slide adjustment: 100 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 370 mm DIMENSIONS / WEIGHTS total weight approx.: 7000 kg Located in Barcelona - Spain 2 identical units available
Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg
Collet holder, tool holder, tool holder, milling holder, milling tool, cutter head holder, milling arbor, power chuck -Manufacturer: NT Tool, high-performance power chuck in original packaging -Type: SK40-CT20S-105 -Clamping Ø: 20 mm -Number: 2 pieces -Price: per piece -Dimension box: 240/100/H125 mm -Weight: 2 kg/piece
PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: Servo Power Supply -Type: TVM 1.2-050-220/300-WO/220/380 -Item: 232270-04397 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 14.8 kg
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, switching power supply -Manufacturer: TDK-Lambda, DIN rail power supply -Type: DPP480-24-3 -Input: 3 PH 400-500 VAC -Output: 24 VDC 480 W -Dimensions: 150/112/H124 mm -Weight: 1.7 kg
PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz -Output: 3 AC 3.1 A -Power: 1.1 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg
PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg
PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: 500/510/H670 mm -Pump max. Pressure: 30 bar -Pump max. Liter output: l/min -1x drive: 0.75 kW 1380 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 500/510/H670 mm -Weight: 88 kg
Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg
Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg
Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg
Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg
Basic - feed-in unit, feed-in module, inverter, frequency converter, frequency transformer, drive inverter, controller, variable speed drive -Type: BUS622-15/22-54-0-000 -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x15A 0-300Hz -Number: 3x servo power units available -Price: per piece -Weight: 7.3 kg
Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V
Socket distribution box, construction site power distribution box, connection cabinet, power distribution box, moisture-proof distribution box, wall-mounted distribution box, high-voltage distribution box, electrical connection box -Power distribution: wall-mounted distribution box, electrical connection box -RCD: 25 / 63 A -Sockets: 1x 63A, 2x 32A, 1x 16A, 2x 220V -Individual components: see photos -Overall dimensions: 300/250/H900 mm -Weight: 12 kg
Socket distribution box, construction site power distribution box, connection cabinet, power distribution box, moisture-proof distribution box, wall-mounted distribution box, high-voltage distribution box, electrical connection box -Power distribution: wall-mounted distribution box, electrical connection box -RCD: 25 / 63 / 100 A -Sockets: 2x 220 V -Individual components: see photos -Dimensions: 300/180/H765 mm -Weight: 11.2 kg
Power converter, power supply, power supply unit, switching power supply, power supply device, built-in power supply unit Manufacturer: Siemens, built-in power supply system SVS2 -Type: E24 G5/ 18 WRG -Order No.: 6EV 3053-OCC -Technical data: see nameplates and photos -Dimensions: 200/60/H245 mm -Weight: 1.9 kg
PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 power module ET 200S orig -Type: 6ES7 138-4CB10-OABO -Number: 6x module available -Price: per piece -Cardboard dimensions: 90/60/H20 mm -Weight: 0.1 kg/pc.
PLC controller, expansion module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 Power Module ET 200S Original Packaging -Type: 6ES7 138-4CA01-OAAO -Number: 2 modules available Price: per piece -Cardboard dimensions: 90/60/H20 mm -Weight: 0.1 kg/pc.
PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 power module ET 200S orig -Type: 6ES7 138-4CA00-OAAO -Number: 2x module available -Price per piece -Cardboard dimensions: 90/60/H20 mm -Weight: 0.1 kg/pc.
PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 digital input electronic modules ET 200S 5 pieces -Type: 6ES7 138-4CA00-OAAO -Price/delivery: complete -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, pulse module, built-in power supply -Manufacturer: Mean Well, built-in power supply unit with housing -Type: SP-480-24 -Input: 100-240VAC 50/60Hz 6.5A -Output: DC 24V 20A -Number: 8x power supply available -Price per piece -Total dimensions: 550/160/H280 mm -Weight: 12.1 kg/pc.
Power supply, power converter, power supply unit, switching power supply, DIN rail power supply, power supply, pulse module, built-in power supply unit -Manufacturer: Mean Well, Built-in power supply unit with housing -Type: SP-480-24 -Input: 100-240 VAC 50/60 Hz 6.5 A -Output: DC 24V 20A -Dimensions: 420/125/H230 mm -Weight: 7.1 kg
Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, servo power unit BUS624-38/55-54-0-000 -Built-in control device: Controller BUS 6E -Type: BUS6-E-SM-0012-A011-0000 -Number: 3x devices available -Price: per piece -Dimensions: 300/165/H380 mm -Weight: 11.9 kg/piece
PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 power module ET 200S -Type: 6ES7 138-4CB11-OABO -Number: 3x module available -Price per piece -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc.
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, switching power supply -Manufacturer: TDK-Lambda, DIN rail power supply from CNC machining center Santenberg GTC S 2 -Type: DPP240-24-3 -Input: 3PH 400-500VAC -Output: 24VDC 240W -Dimensions: 120/90/H130 mm -Weight: 1,1 kg
Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty railcar with lifting cylinder -Type: Railcar MTA, load capacity 20000 kg -Roller spacing: 2150 mm -Cylinder spacing: 2245 mm -Lift height: 110 mm -Drive units: 2x Demag geared motors type ZBF80A 4 B020 gearbox type ADE40TD -Individual components: see photos -Overall dimensions: 2860/2440/H610 mm -Empty weight: 2200 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for power chucks, 4 sets -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 330/230/H105 mm -Total weight: 27.5 kg
PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 power module ET 200S -Type: 6ES7 138-4CB11-0AB0 -Number: 4x module available -Price per piece -Dimensions:120/20/H70 mm -Weight: 0.1 kg/pc.
Power supply unit, power converter, power supply, switching power supply unit, DIN rail power supply unit, power supply, power converter, power supply unit, switching power supply unit, DC UPS module 15 -Manufacturer: Siemens, Sitop Power Power Supply DC UPS Module 15 -Type: 6EP1 931-2EC01 -Number: 2x power supply available -Price per piece -Dimension: 130/70/H130 mm -Weight: 0.4 kg/pc.
Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, power board -Manufacturer: Heidenhain, power board CNC control -Type: PL 405 B -ID No.: 263 371 22 -Voltage: 24V -Quantity: 2x circuit board available -Price per piece -Dimensions: 280/230/H50 mm -Weight: 1.2 kg/pc.
maximum number of results exceeded
please refine your search
50 € 
