We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...
used
Key data: 2400 , 400
CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...
used
Generator, emergency generator, generator, generator, power generator, generator, emergency generator -Sound attenuated -Power: 7.0 KVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 volts -1x: power socket 380 volts -1x: charging cable socket 12 volts -Dimensions unit: 590/780/H750 mm -Weight: 136 kg
used
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo line former, drive control device, power supply -Manufacturer: Indramat, AC Servo Power Supply from CNC milling machine MAHO MH 800C -Type: KDV 2.1-100-220/300-W1-220 -Quantity: 1x servo controller available -Dimension: 485/105/H420 mm -Weight: 18 kg
used
Key data: 600
MWM TCG 2016V12 600 kW el. power, 50 Hz after main overhaul with, also prepare TC, Intercooler, alternator) genset. Fully completed - also possible option add: control panel, power switch automat, container, cooling an heat system.
used
Power contactor with overcurrent relay EAW power contactor: ID 1 TGL 28973 12,5 kW 660 V AC 16 A Us: 220 V AC overcurrent relay: IR 1/1 TGL 29381 4.0 - 6.6 A 660 V AC used, tested ! Dimensions: 125 x 68 x 108 mm
used
Soco Powered roller conveyors roller conveyor 1980-670-610 RA2021 Make: Soco Roller width (RB): 610mm, Rubber rolls Nominal/outer width (NB): 670mm length: 1980 mm Rolls diameter: 50 mm Roller distance 60790/120 mm Overall height frame: 180 mm Drive: Nerimotori Power: 0.37 kW Scope of delivery: without supports Motor segments can be combined with overdrive segments, so one motor can be used to drive several overdrive segments. Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: Nerimotori KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung s ...
used
Power Supply ICP ELECTRONICS INC. ACE-723A power: max. 0.2 kW ( 200 W ) input voltages: 115 V AC, 5 A / 230 V AC, 3 A input voltage range: 85 - 135 V AC / 180 - 265 V AC frequency: 50 / 60 Hz output voltages: +5 V DC, 33 A / +12 V DC, 12A / -12 V DC, 1.5A / -5 V DC 1.5A approx. 0.6 m cable with connector New ! Dimensions ( without cable ): 205 x 115 x 51 mm
used
Power contactor SIEMENS 3RT1016-1BB41 4 kW 400 V control voltage: 24 V DC with surge limiter 3RT1916-1BB00 New ! dimensions ( contactor ): 55 x 45 x 105 mm
used
Key data: 700 bar, 3 kW
Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.
used
Power distributor, energy bus distribution connection box, with connection cable WEIDMÜLLER FieldPower® Type 4X 5-pole 2.5 - 6 mm² max. 41A / 800V IP20 approx. 2.5 m Connection cable with plug used, tested ! dimensions (without cable): 185 x 105 x 70 mm Dimensions (packaging): 300 x 200 x 100 mm
used
Power contactor, contactor, with auxiliary switch block SIEMENS 3TB42 17-0BB4 ( 3TB4217-0BB4 ) 7.5 kW 380 V 30 A Us: 24 V DC auxiliary switch block: 2 NO contacts, 2 NC contacts New ! dimensions ( contactor ): 85 x 45 x 145 mm Dimensions (packaging): 165 x 90 x 50 mm
used
Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel
used
used
Indramat Power Supply-----Power supply Type CO 1.3-100-220
used
Key data: 1558 KW, 2300 kVA, 400 V
Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.
used
Description: Max. Speed: 5200 rpm Max. actuated force: 6000 daN Chuck diameter: 250 mm Approx. Onsite Dimension. (l x w x h): 350 x 300 x 250 mm, weight approx.: 70 kg
used
Key data: 130 , 200
MAN gas generator enclosed in sound proof chamber, in good condition. It has the following specifications: Manufacturer: MAN Fuel: Gas Manufacture year: 2010 Kva: 200 Power: 130 kW Other specs: Turbo included. Control panel included.
used
Natural gas CHP MAN E2876 E312 Power el.: 143 kW Power th.: 205 kW 6 cylinders Commissioning: 2017 Hours: 44650 Full maintenance by AVS Aggregate has been preserved Generator: Manufacturer: FKI - Type: MJB250LB/4 - 158/188 kVA Soundproofing hood 2x heat exchanger and heat accumulator 2x 5000 liters Subject to prior sale - errors possible Internal Reference Number: E-1175
used
Power supply SIEMENS SITOP modular 5A 1P 6EP1333-3BA00 120 / 230 - 500 V 1~ AC 24 V DC 5 A Dimensions: 165 x 125 x 65 mm
used
Power Supply, Electronic Module, Power Supply, Transformer ELME EG1-A34 Input: 200 - 575 V 1AC 50 - 60 Hz Output: 24 V DC, 6.0 A used, tested ! Dimensions: 105 x 100 x 145 mm
used
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer, unstab. DC power supply, Contactor -Manufacturer: Block, Unstab. DC power supply -Type: SDV 400/24-15 -Entrance: 3Ph. 400V V -Output 24V - 15A -Technical data: see photo nameplate -Dimensions: 170/200/H270 mm -Weight: 8.5 kg
used
Power contactor BBC HSA 62 E IEC 337-1 600 V 16 A control voltage: 220 V AC, 50 Hz New ! Dimensions: 72 x 43 x 102 mm
used
Power contactor BBC HSA 80 E IEC 337-1 600 V 16 A control voltage: 220 V AC, 50 Hz New ! Dimensions: 72 x 43 x 102 mm
used
10pcs OMRON S8VS-12024AP / S8VS-18024AP Switching Power Supplies SWITCHED-MODE POWER SUPPLY for DIN rail mounting Specifications: Switching Power Supply - Switching Power Supply for DIN Rail Mounting - Supply Voltage 100... 240 VAC - Output: 120W / 24VDC (5A) - Display U, I, Imax ,Remaining Life - Undervoltage,Lifetime Alarm PNP - Approvals.CE ,UL,CSA
used
Hydraulic power unit with tank, universal power unit ORSTA hydraulic pump: A 6,3 R TGL 10859 16 MPa ( 160 bar ) 6.3 dm3/min ( 6.3 l/min ) Motor: 1.5 kW 1410 rpm 220 / 380 V 3AC 50 Hz IP54 Tank: max. 40 l used, tested ! Dimensions: 800 x 550 x 1180 mm
used
Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.
used
Scania Schnell Engine in good condition with the following specifications: Power: 250kW Mfy: 2006 Fuel: Gas /Diesel (Dual fuel) Voltage: 400V
used
Description: amount 5 pieces weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm
used
Description: amount 1 piece weight approx.: 8 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm
used
Description: amount 4 pieces weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm
used
Power source for orbital welder MESSER GRIESHEIM - POLYSOUDE PS204 Water Cooling for Orbital Welder MESSER GRIESHEIM - POLYSOUDE RC200 without accessories available multiple times Price for a set consisting of 1x power source and 1x water cooling 1.900,-- EUR net, free loaded.; used
used
Power contactor EAW, ESGO ID 2 TGL 28973 26.6 kW 660 V AC 40 A Us: 110 V AC 50 Hz auxiliary contactor: 4 NC, 4 NO contactors used, tested ! Dimensions: 95 x 75 x 115 mm
used
Power contactor EAW, ESGO IDX 31 TGL 28973 40 kW 660 V AC 90 A Us: 220 V AC 50 Hz auxiliary contactor: 2 NC, 2 NO contactors used, tested ! Dimensions: 110 x 86 x 135 mm
used
Power contactor EAW, ESGO ID 4 TGL 28973 53 kW 660 V AC 100 A Us: 110 V AC 50 Hz auxiliary contactor: 4 NC, 4 NO contactors used, tested ! Dimensions: 125 x 95 x 150 mm
used
Key data: 15 bar
Article number: 27-06-093 Manufacturer: Parker Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.2002 L x W x H: ca.700x800x1600mm Weight: approx. 300kg Max. pressure: approx. 15 bar Volume: approx. 90 dm3 Accessories Mahle Industrial Filters
used
Key data: 100 bar
Article number: 27-06-132 Manufacturer: Rexroth Very good general condition Hydraulics ran without defects until dismantling, suitable for Weisser Multivertor, among others Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1200x600x1400 Weight: approx. 120kg Volume: approx. 100dm3 Max.pressure: approx. 100bar Tank capacity: approx. 200 liters Other accessories on request Price and other technical data on request
used
Electronic module, AS-i Power, AS-I power supply SIEMENS 3RX9501-0BA00 Input voltage:120 / 230 V AC output voltage: 30 V DC output current: max. 3 A IP20 New, with documents ! Dimensions ( AS-I Power Supply ): 135 x 50 x 126 mm Dimensions ( packaging ): 145 x 140 x 60 mm
used
Description: 70 kvA 4 cylinder RICARDO diesel engine Approx. Onsite Dimension. (l x w x h): 2,100 x 850 x 1,250 mm, weight approx.: 880 kg
used
Hydraulic power unit with tank, universal power unit ORSTA 55119M Hydraulic pump: WADOWICE Type: PV2V3-30/25R1 MC63A1 63 bar 25 - 19 cm3/U engine: VEM KMR 90 L4 2,2 kW 1425 rpm 220 / 380 V 3AC 50 Hz IP44 tank: max. 100 l New ! with underlays ! Dimensions: 760 x 450 x 1200 mm
used
Power converters, thyristor converters VEM, ELECTRICAL SWITCHGEAR Eisenach TUD 6 TUD 6.TUD 6.2.1 ( TUD6.6.1 ) input: 260 V AC 49 - 62 Hz 37 A output: 350 V DC 45 A IP00 used, tested ! Dimensions ( without bracket ): 315 x 280 x 245 mm Dimensions ( complete ): 315 x 315 x 295 mm
used
Power converters, thyristor power converters VEM, ELKTROPROJEKT UND ANLAGENBAU BERLIN Thyresch CT-CNO CT-CNO 022-DGKv400/100 ( CT-CNO022-DGKv400/100 ) input: 380 V AC 50 / 60 Hz 82 A output: 400 V DC 100 A IP00 used, tested ! Dimensions ( without bracket ): 330 x 280 x 305 mm dimensions ( complete ): 330 x 330 x 380 mm
used
Description: 2x battery pack 20V 9 piece drill set screwdriver angle grinder salad nut driver nutrunner with inserts 4 grinding wheels in original packaging Approx. Onsite Dimension. (l x w x h): 550 x 400 x 120 mm, weight approx.: 15 kg
used
Description: unused 3-phase motor power: 18 kW frequency 50hz , standby power motor model cd292f 4 cylinder 5597 Approx. Onsite Dimension. (l x w x h): 650 x 760 x 1,250 mm, weight approx.: 300 kg
used
Description: capacity: 15.00 kVA connection: 380 V motor brand: Ricardo ZH2105D motor power: 12 kW generator brand: ac generator generator type: vg-164g generator power: 33 A hours read: 1 manual available: yes description: frequency 50Hz standby power 14.52Kva/13.2Kw 59 liter tank 3phase 4125 Approx. Onsite Dimension. (l x w x h): 1,750 x 900 x 1,150 mm, weight approx.: 650 kg
used
Description: capacity: 25.00 kVA connection: 380 V motor brand: Ricardo engine power: 20 kW generator brand: Ac generator generator type: Vg-184-g generator capacity: 33 A hours read: 0 manual available: yes description: unused, frequency 50hz , standby power , 72 liter tank , 3-phase 4124 Approx. Onsite Dimension. (l x w x h): 2,000 x 850 x 1,150 mm, weight approx.: 710 kg
used
Description: capacity: 50.00 kVA connection: 380 V motor brand: Ricardo R6105AZD-274C motor power: 80kW generator brand: ac generator generator type: 274C generator capacity: 160 A hours read: 1 manual available: yes description: frequency 50Hz standby power 105Kva/84Kw 135 liter tank 3-phase 2 batteries 5594 Approx. Onsite Dimension. (l x w x h): 2,800 x 1,090 x 1,430 mm, weight approx.: 1,400 kg
used
Description: v.v. 2800 maximum watts 212cc OHV engine 50 Hz mounting kit steel frame 15L fuel tank 3000rpm unused P023 - 3901 Approx. Onsite Dimension. (l x w x h): 430 x 610 x 480 mm, weight approx.: 45 kg
used
Description: v.v. 2800 maximum watts 212cc OHV engine 50 Hz mounting kit steel frame 15L fuel tank 3000rpm unused P023 - 3901 Approx. Onsite Dimension. (l x w x h): 430 x 610 x 480 mm, weight approx.: 45 kg
used
Description: 6500 maximum watts 420cc OHV engine electric start mounting kit 50Hz 220V-240V for 1-phase 220/380V-240/415V for 3-phase steel frame 25L fuel tank unused P023-3900 Approx. Onsite Dimension. (l x w x h): 560 x 650 x 795 mm, weight approx.: 93 kg