diesel man 20 used for sale

Equipped with: Manitou, type MRT 1432 turbo, lifting capacity 3.2ton, lifting height 14.0mtr, cabin, ground bucket, pallet forks, safe-load indicator, rotating version, extra hydr. connections, 2 wheel, 4 wheel and crab steering, hydr. stabilizers/outriggers, range: 11.63 m, engine: Perkins 106 hp, drive 4x4, 2 electro-proportional joysticks, hydrostatic transmission, length (to carriage) 5,060 mm, width 2,390 mm, height 2,970 mm, wheelbase 2,320 mm, ground clearance: 340 mm, turning radius (tyres) 3,410 mm, 4 stabilizers (individually or simultaneously). Auction-ID: A1-40137-43

Unchecked from practice Closure Auction-ID: A7-46327-64

Type: Vacuum Pump Set with Manifold Gauge Manufacturer: VALUE Configuration: - Portable electric vacuum pump - Integrated oil reservoir with sight glass - Carry handle - Power cable with plug Included Accessories: - Manifold gauge set (Mastercool) - Pressure gauges (high/low) - Connection hoses (red, blue, yellow) Application: - Evacuation of refrigeration and air-conditioning systems - Service and maintenance of HVAC circuits Features: - Oil-lubricated rotary vane vacuum pump - Compact portable design - Service connections for HVAC systems Condition: Used Auction-ID: A7-45993-87

Chassis number: AGCHEM2201377, Equipped with: Cummins 6CTA diesel (6-cylinder), Capacity: 8.3 litre, Power: ±240 hp, central lubrication, manual, without registration, 3mdouble-acting valves, rear linkage, hour reading: 6345. Auction-ID: A1-40137-73

In working order Table diameter (excluding clamping jaws): 135 cm Tree dimensions: height: 310 cm Length: 380 cm Width: 90 cm Features: Mobile control box Fuse box Vertically and horizontally adjustable column Tilting clamping table90 degrees ESAB Powermig welding machine Excluding pictured extraction. Auction-ID: A1-41995-10

2 bands, brush Instruction manual included Air shoes defective Electronics need to be repaired Veneer and varnish sanding only possible after overhaul and recalibration With blower without suction flaps Many replacement sanding belts of different grits Auction-ID: A1-46501-2084

Equipped with: reversing camera, work lights, lifting device, load sensing, 2x double-acting hydraulic valves, air pressure change system, hydraulic suction arm, DAF 6 Cylinder Auction-ID: A1-40137-21

Stehle Profile Cutter Head 134x80x30mm Auction-ID: A1-46501-2040

equipped with cutting cabinet, control panel, hose rack, air connection, Auction-ID: A1-40137-110

Type: Manual Hydraulic Hand Pump Brand: Holmatro Application: Hydraulic pressure generation for testing, lifting or rescue tools Equipment: - Manual lever-operated pump - Integrated hydraulic cylinder - Pressure gauge (0–1000 bar scale) - Hydraulic outlet with coupling - Oil filling cap - Base mounting brackets Technical Data: Operating pressure: up to approx. 1000 bar (based on gauge) Drive: Manual lever Medium: Hydraulic oil Condition: Used Auction-ID: A7-45993-73

General description Set of 2 manual industrial presses suitable for light pressing, riveting, assembly, and small stamping operations. Compact and robust units for workshop use. Technical details Type: Manual presses (arbor / toggle type) Quantity: 2 units Operation: Hand-operated lever system Configuration: - 1x vertical arbor press (simple design) - 1x adjustable press with geared head and return spring Capacity: Estimated 0.5 – 2 tons Construction: Cast iron body Mounting: Bench or floor-mounted base Application: Pressing, riveting, bearing insertion, light punching and assembly tasks Equipment - Vertical rams - Hand levers - Flat die/work surfaces - Adjustable head mechanism (on one unit) Condition and remarks Used machines. Show typical wear from workshop use. Structurally robust and suitable for continued operation. Sold as a set. No electrical component ...

Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-46498-98

Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge Auction-ID: A1-46480-2125

Technical details Manufacturer: Genkinger (Hermann Genkinger KG) Model: AE 3/6 Year: 1976 Type: Hydraulic lift table cart Operation: Manual hydraulic system (foot pump) Load capacity: 300 kg Own weight: Approx. 100 kg Configuration: Scissor lift mechanism Platform: Steel loading platform Mobility: Industrial castor wheels with push handle Application: Ergonomic lifting and transport of materials in workshop and production environments Dimensions and weight (approx.) Length: 800 mm Width: 600 mm Height: 900 mm Weight: 100 kg Auction-ID: A7-46498-123

EXCLUDING INTESTINES Including blue drag hoses (rear part) - Working width: 650cm Pump overhauled several years ago! Last 10 years only used with water Auction-ID: A3-43529-13007

Hand sheet metal shears, Dimension: 1000x260x1800mm; Mandrel press, Dimensions: 600x400x1500mm ; see photos for more details Auction-ID: A7-46619-322

Ingot / Bar Casting Moulds and Foundry Equipment General data: Equipment type: Casting moulds and handling tools for aluminium Application: Aluminium ingot / bar casting Main components: Long rectangular refractory-lined moulds (for aluminium bars/ingots) Multi-cavity cast iron moulds Smaller block-type moulds (stacked, for small ingots or test pieces) Handling tools: Manual ladles for pouring molten metal Tongs, rods, and skimming tools Additional equipment: Steel working table / rack Custom frame for holding moulds during pouring Description: Complete set of casting moulds and auxiliary equipment used in aluminium foundry operations. The system includes various mould types for producing ingots and bars, along with manual handling tools and support structures for efficient and safe casting processes. Auction-ID: A7-46498-19

Technical details Type: Industrial workbench station with tooling and storage Configuration: Multi-section steel workbench with integrated storage and tool wall Bench: - Steel frame with heavy-duty worktop - Length: Approx. 3000–4000 mm - Integrated drawers, shelves, and cabinet sections Tool storage: - Pegboard/tool wall with mounted hand tools - Plastic storage bins with components Additional storage: - Metal cabinet (2-door) - Drawer units and shelving Contents include: - Hand tools (wrenches, files, calipers) - Abrasives (grinding wheels, sanding belts) - Clamps, fittings, and mechanical parts Application: Manual assembly, repair, machining, and maintenance workstations Condition: Used, with wear, damaged work surface areas, oil stains, and mixed tooling condition Dimensions and weight (approx.) Length: 3000–4000 mm Width: 800 mm Height: 900 mm Weight: 2 ...

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg

Pneumatic cylinder DESTACO K 3000 - 200 - 6 stroke: 200 mm rod diameter Ø 65 mm Dimensions: 540 x 130 x 130 mm

Pneumatic cylinder FESTO DNGU-32-200-PPV-A S3 158098 stroke: 200 mm Rod diameter Ø 12 mm Dimensions: 345 x 95 x 50 mm

Centering vise, centrifugal clamp PAGUS jaw width: 200 mm jaw height: 50 mm span: 0...200 mm on rotary table with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm

Pneumatic cylinder FESTO DNC-100-200-PPV-A 163472 stroke: 200 mm Rod diameter: Ø 35 mm pmax: 12 bar used ! Dimensions: 580 x 115 x 160 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 piston Ø 125 mm stroke 200 mm Rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

Hydraulic Testing Press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch) largest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Motorroller ITOH DENKI Power Moller PM 570 AS - 15 - 200 - 3 - 200 - NR 630 A Diameter: Ø 63 mm Length: 200 mm New ! Dimensions: 260 x 70 x 70 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 205 x 205 mm Height: 85 mm used, tested ! Dimensions: 410 x 205 x 85 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table, Spotting Plate PAGUS Work surface: 200 x 200 mm Height: 80 mm used, tested ! Dimensions: 390 x 200 x 100 mm

Drill, High Frequency Tool, High Frequency Machines BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! Dimensions: 450 x 300 x 90 mm

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

Refrigeration dryer Atlas Copco FD 110 Air flow rate 6,600 l/min Manufacturer Atlas Copco Machine number CAQ 093483 Type FD 110 Year of construction 2003 max. pressure 13 bar Power consumption 1.4 kW Delivery throughput 6,600 l/min Refrigerant R 404 A Compressed air connection 1 1/2 inch Test run carried out lxwxh 81x70x81 cm Weight 122 kg Auction-ID: 047-DXS-3

Screw compressor Cecatto CSM 15 Bj.2011 10 bar Manufacturer: Cecatto Cecatto is part of the Atlas Copco Group Also sold under the name Mark Airpress Machine number CAI 511821 Type Plus CSM 15 XB Year of construction: 2011 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,420 l/min Operating hours 28,498 B/h Test run carried out LxHxW 82x65x100 Weight 180 kg Auction-ID: 047-DXM-3

Refrigeration dryer Hankinson air flow rate 4,300 l/min Manufacturer: Hankinson Machine number 2300701080 Type HHDP 260 CE-G Year of manufacture 2001 max. pressure 12.8 bar Power consumption 0.82 kW Delivery throughput 4,300 l/min Refrigerant R 134 a with manual steam trap Test run carried out lxhxw 77x69x70 cm Weight 86 kg Auction-ID: 047-DXT-3

Screw compressor Boge S 20-2 Manufacturer Boge Machine number 509692 Type S 20-2 Year of manufacture 2005 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,240 l/min Operating hours 18,903 B/h Idle hours 1,613 B/h Customer service due LxHxW 120x88x115 Weight 350 kg Auction-ID: 047-DXL-3

Compressed air filter combination Atlas Copco PD 310+ QD 310+ Air flow rate 18,600 l/min Manufacturer Atlas Copco Type PD 310 + and QD 310 + Year of construction 2019 max. pressure 16 bar Delivery throughput 18,600 l/min Air connection 2 1/2\" lxwxh 45x17x78 cm Weight 22 kg Auction-ID: 047-DXU-3

Steyr 6165 Impuls CVT municipal tractor, first registration 31.08.2021, with approx. 3,650 operating hours. The vehicle comes from municipal use and has extensive equipment for year-round use. The continuously variable CVT transmission was renewed in August 2025. ⸻ Equipment: • Continuously variable transmission (CVT), 50 km/h (new 08/2025) • Municipal design • Front mounting plate size 3 • Hydraulic front lift (optional for an extra charge) • Gödde axle support on both sides • Load-sensing hydraulics • S-BRAKE • 4 rear control units • 3 front/center control units • Extensive hydraulic connections front and rear Several additional screens can be seen in the interior, these are not included in the scope of delivery. ⸻ Condition: Used, technically functional and ready for use. Usual signs of wear present, especially on attachmen ...

Hydromak paving machine VARIO 2000 Year of construction 1994 Net weight approx. 950 kg Machine starts perfectly and runs smoothly Engine and drive technically in order Conversion to joystick control with rotary motor started Pliers should be made rotatable (project not completed) Ideal for hobbyists or to complete the conversion Perfectly suitable for paving work/road construction Including original Hydromak broom Robust and proven technology Sale due to lack of time Private sale – no guarantee or warranty Auction-ID: 04L-VNP-1

Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet

\" Scribing and control plate 200 × 200 mm, cast design with feet Scribing or control plate in square design. The plate serves as a flat support and reference surface for testing, marking and control work in toolmaking, quality assurance or in the workshop. Surface finely worked, all around with chamfer. Underside with four cast feet for a stable support. Dimensions: 200 × 200 mm Height: approx. 55 mm Material: cast body with machined surface Design: with feet \" Auction-ID: A7-46417-335

Engine running, but it needs to be checked. Reason for renewal of lifts and BE driver's license needed, which we don't have The ladders are in good condition Auction-ID: A3-43525-2220

Power: Req. tractor power approx. 24 hp; diaphragm pump 55 L/min Operating parameters: Fan Ø 550 mm; air output 24 m/s; gearbox 2 speeds + neutral; vertical spray reach up to 6 m Workpiece capacity: Tank cap. 200 L; orchard & vineyard spraying; 10 nozzles Supported edges: Orchards, vineyards, tree crops Edge types: Air-assisted spraying; phytosanitary treatment Included equipment: Turbine fan Ø 550 mm; diaphragm pump 55 LPM; 10 spray nozzles; 2-speed gearbox + neutral; compact tank frame Compliance: Agricultural sprayer equipment Power supply: Tractor PTO Year/Manufacturer: Mahindra – Airotec 200L 550 Remarks: Lightweight orchard/vineyard sprayer suitable for small tractors and narrow rows Compact 200 L air-assisted sprayer with turbine fan for orchard and vineyard crop protection. Auction-ID: A7-46448-89

If you have any questions or details, please do not hesitate to contact us. Best regards, M.Mousa Serhan , Mobile: 0172 72 653 24 Managing Director-Owner

Brand: Fiat Model: Doblo • Variant: Estate / Cargo (double cab, 5-seater) • Registration date: 28.10.2016 • Vehicle class: Commercial vehicle / light van • Colour: White • Engine: 1.6 Multijet Diesel • Power: approx. 77 kW (105 hp) • Fuel: Diesel • Transmission: Manual • Drive: Front-wheel drive • Permissible total weight: approx. 2,000 – 2,100 kg • Emission class: probably Euro 5 • Seats: 5 • Sliding door right / left • Glazed side wall in the cargo area • Rear wing doors (double-leaf) • Fabric interior • Power steering • ABS, ESP • Driver's airbag • Passenger airbag • Steel rims • Adjustable exterior mirrors • Radio • Rear bench seat (3 seats) • Interior with signs of wear, see pictures • Body with scratches • No obvious accident damage visible • General condition: used, com ...

Equipped with: Deutz engine block from a Fendt 410 Auction-ID: A1-40137-103