128,422 used machines on RESALE, but how to find them? Machine Search
This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.
The further development of the TBA 19 V10 was initially called V 20. The main changes can be seen at first glance in the control system and the final sealer. Like its predecessor, the system produces 7500 packs per hour in this format and does not differ from the TBA 19 V 10 previously known. The further development of the TBA 19 includes extensive innovations in the control and mechanics of the plant, which can lead to an improvement in efficiency in constant operation. As with all other machines, smooth and efficient operation requires consistent adherence to service intervals. The operator on the systems should be intensively trained and have sufficient experience in operation. This system also undergoes all the necessary tests and inspections before handover. Our customers are invited to this at any time in order to be able to inspect the machine in operation during the acceptance pr ...
This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.
For sale here is a UPF Filter 50 exterior for the MWM 2020 V12 from our stock. Item number original: 12142719 Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional exper ...
This 3-axis Quaser MV-204 CP vertical machining centre was manufactured in 2007. It features a working area with X-axis travel of 1200 mm, Y-axis travel of 700 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1400 x 700 mm and a maximum table load capacity of 1800 kg. If you are looking to get high-quality milling capabilities, consider the Quaser MV-204 CP machine we have for sale. Contact us for further details.
This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details.
This 5-axis Bystronic Byjet L 2030 was manufactured in 2004. It features a maximum cutting speed of 30 m/min and a maximum material thickness of 200 mm. The machine has a substantial workpiece weight capacity of 4,740 kg and a load capacity on the cutting grate of 790 kg/m². If you are looking to get high-quality waterjet cutting capabilities, consider the Bystronic Byjet L 2030 machine we have for sale. Contact us for further details.
Dust extraction and filtration system manufactured in 2018. This Nawara RUBIN 2030 is designed for the extraction of dry dust and wood chips, making it suitable for woodworking and industrial dust collection. It features a stationary modular filter system and a warm air recovery system for continuous operation. If you are looking to get high-quality dust collection capabilities, consider the Nawara RUBIN 2030 machine we have for sale. Contact us for further details.
This 6-axis FANUC M-20iA robot arm was manufactured in 2015. It features a maximum payload of 20 kg and an impressive reach of 1,811 mm. The robot can be mounted in various configurations, including floor, ceiling (inverted), and angle mounting. If you are looking to get high-quality automation capabilities, consider the FANUC M-20iA robot arm we have for sale. Contact us for further details.
CONTROLS PLC SIEMENS SPECIFICATIONS THROUGH FEED GRINDING MACHINE Working width: 1300 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3100 mm space requirements -front/back-: 1500 mm total height: 2200 mm total weight approx.: 3000 kg
Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002
Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.
Key data: 1169 KW, 1500 1/min
Brand: MWM GmbH Model: TCG 2020 V12 Year: 2005 Type: Gas engine (CHP / power generation) Configuration: V12 (12 cylinders) Cycle: 4-stroke Fuel type: Natural gas / biogas Displacement: approx. 60 liters Turbocharged: Yes Cooling system: Water-cooled Power output: approx. 1,000 – 1,200 kW Operating speed: approx. 1,000 – 1,500 RPM Gas engine is with control panel, gasoline and pumps
sheet width: 2020 mm plate thickness: 1,5 mm : 135 ° : 100 mm total power requirement: 1 kW weight of the machine ca.: 965 kg dimensions of the machine ca.: 2680 x 640 x 1100 mm NEW PRICE: 9,990 EURO Description: - Foot operation enables positioning of the sheet metal with both hands - Workpiece clamping and bending process are motorized via a chain drive - Manual adjustment of the bending angle, reading of the angle on a scale ring - Many bending options with segmented upper beam - Precise movement of the bending beam via large flat guides - Heavy, robust welded construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
M.T.A.A ARIES TECH 2 105 HE, R410a New model year 2025:, 338 kW effective cooling capacity,, water inlet/outlet 20°/15°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, 4 condensers consisting of copper tubes and aluminium fins (NOT micro-channel), Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 338 kW cooling capacity, conditions: new machine, type: chilling unit
M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...
Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501
Description DÖRRIES SDE 200 Vertical Lathe Details Type SDE 200 Machine number K240/50662 Year of manufacture 1977 Face Plate 2,000 mm Circulation 2,200 mm Turning height 2,150 mm Max. table load at reduced speed 20 to incl. documentation
Ref. №: 4365 Bin washer Type: NIEROS CL-K 200 D For washing: Eurobins – 200 l. Capacity: up to 40 bins/h depending on pollution Power: 28 kW Voltage: 3 x 400 V, 50Hz Machine dimensions in cm: Width: 170,0 Depth: 160,0 (when lid open 290) Height: 190,0
Key data: 200 t
Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.
Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Consisting of a TBA 19 V100 200ml Base Filling Machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Straw Applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Consisting of a TBA 19 200V 125 ml Slim filling machine with a Tetra Pak straw applicator TSA 21 Tetra Pak TrayPacker TCBP 70 Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
sheet width: 2040 mm plate thickness: 4,0 mm distance between columns: 2100 mm roll diameter: 150 mm total power requirement: 7,0 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
plate thickness: 6 mm blade length: 200 mm angle adjustable from - to: fest 90 Grad table surface area: 750 x 500 mm pressure: t total power requirement: 3,0 kW weight of the machine ca.: 0,62 t dimensions: 1,2 x 0,8 x 1,2 m Combination machine: edging and notching - foot switch - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3500 kN, 519 g/PS, 55 mm
1.0 pcs. Injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM350-2000CX Year of Make: 2008 Clamping force: 300 tons Spar spacing 710 x 7100 mm Screws DN: 55 mm Max. displacement: 570 cm³ Moulded part weight: 519 g/hp Control: MC5 Equipment: 2 pcs core train Robot Manufacturer: SEPRO 45-fold hot zone channel control Interface temperature control unit Approx. 67,530 operating hours
This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details.
An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible.
I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.
: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...
Key data: 2050 mm, 4 mm
Used guillotine shears of the make Vimercati type 2050x4 Year of manufacture 1997
The machine is in good technical condition, after prior agreement it is possible to test it. Head Precitech - Germany, Source IPG. Dior plates changed this year. Automatic change - 2 tables. Table 3x1.5 m.
Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420 ...
The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production
Overview This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data Capacity: approx. 20 ppm Formats: 1.5 L – 3×2 2.0 L – 3×2 Application: Shrink packaging of PET bottles Configuration: Shrink packer with sealing bar (film only)
new
: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: ca. 250 mm grinding length: 200 mm centre height: 85 mm total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...
Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide
Milling fence adjustment: via handwheel; Milling stop Gauge: Siko meter; Milling jaw adjustment: handwheel; Milling jaw gauge: Siko counter;
Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod: Tripod 1050mm; Motor power: 1/0.7kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox
Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox
Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station
Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: pneumatic, jet cleaning; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dust extractors have been developed for the extraction of wood chips, wood dust and related substances
Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: mororic; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also for
Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.
maximum number of results exceeded
please refine your search
