128,416 used machines on RESALE, but how to find them? Machine Search
Key data: 1 mm, 10 mm
Hebrock EURO 2000 edge banding machine - completely overhauled, immediately ready for use - others just push through - We check! You can find a video about the machine on our website. For sale is a reliable and solid edge banding machine made in Germany. The machine has been technically revised and is ready for immediate operation – ideal for carpenters looking for a robust solution without investing in new machines. Radius and chamfer pneumatically adjustable. Machine can be tested on site. Condition / Works: • All pneumatic hoses renewed • 2 master cylinders new • Machine fully cleaned • Technically tested and ready for use Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2001 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working Range: ...
z-travel: 200 mm Clamping diameter of the cutter heads: max. 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting cone for cutter heads Nominal diameter: 500 mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing devic ...
Heidolph Polymax 2040 Stirrer Movement: Wave Rotational speed: 2.5 – 50 rpm (digitally adjustable) Operating Mode: Timer or Continuous Angle: 5/10º Non-slip rubber mat included Load capacity: max. 10kg Platform dimensions (W) x D: 39 x 34cm Dimensions (W) x (D) x (H): 42.6 x 43.5 x 20.8cm
Description Blumer Atlas 200 Label die-cutter ideal for small labels, banderoles and tax or value coupons from 1992, but very little used with tape feeder SE 18.4 Cross-section device Punching unit ST 18.2 Inline tape machine PB 18.2 and output channel Strip sizes: Length of the tape min. / max. 350 / 1115 mm Width of the tape min. / max. 45 / 215 mm (the smallest dimension is 20 x 44 mm) Label sizes: Pre-cut label size min. 25 x 45 mm Pre-cut label size max. 170 x 215 mm Stack height min. / max. 40 / 120 mm Intermediate bleed 3 – 40 mm Blank 3
Description Tapping machine Rems Tornado type 2010 220V, 50Hz used device Threading machine for pipe threads (1/16) 1/8 – 2", 16 – 63 mm, bolt thread (6) 10 – 60 mm, 1/4 – 2". With maintenance-free gearbox, safety foot switch with emergency stop, 2 automatic chucks, automatic lubrication cooling. With tool set, consisting of a universal automatic cutting head for all threads, including long threads, automatically opening, with automatic thread length for tapered threads, cutting jaws for pipe threads tapered ISO 7-1, EN 10226 (DIN 2999, BSPT) R 1/2- 3/4 and R 1 – 2
Description R+S Verpackungstechnik Side sealing machine FAS 700 with shrink tunnel VAST 652 from 2013/2014 1 Minitec conveyor belt built in 2013, L approx. 5,000 mm, W 200 mm, w. sideways Guide rails, 1 conveyor belt R+S TB 2000, built in 2014 SN RS-46010, L 2,000 mm, W 350 mm, base frame height-adjustable, w. lateral. adjustable guide rail, 1 side welder R+S VAS700 built in 2014, SN RS-45943 1 shrink tunnel R+S VAST652 built in 2013 SN RS-47085 1 conveyor belt R+S TB 2000 built in 2014 SN RS-46004 L 2,000mm, W 350 mm, w. 2 sides adjustable guide rails, height-adjustable base frame
Key data: 2000 KW, 6300 V
USED GAS GENERATOR SET MAKE: MTU TYPE: 20V 4000 GS RATING: 2000 KW FUEL: NATURAL GAS M. YEAR: 2016 TOTAL HOURS: 55.000 ALTERNATOR: 6300V, 2600 KW, 50HZ SCOPE: GENSET, CONTROL PANEL, GAS TRAIN
General SKU049Z226 MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filterAir Handler Unit MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshDiscountFluid bed dryers batchGlattDiscountDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...
General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...
The Stork Westfalia Menger with a capacity of 200 liters is a versatile and robust device, ideal for applications in the food industry. This mixing machine is excellent for efficiently mixing, cooking, and cooling various ingredients. It is used but in good condition and ready for immediate use. The machine was workshop-overhauled about 5 years ago (new long-term storage, new belts, etc.), since then it has run for only about 10 hours as a test mixer. With its reliable construction and high-quality workmanship, the machine ensures smooth operation and a long service life. The 200-liter capacity allows larger quantities to be processed in a single pass, which can significantly increase efficiency in your production process. The Stork Westfalia Menger 200 liter is characterized by ease of use and maintenance friendliness. It is a cost-effective and powerful solution for operations seeking ...
x-travel: 510 mm y-travel: 410 mm z-travel: 510 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Fanuc Oi-MD electronical hand wheel 24-fold automatic tool changer Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 410 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 600x400 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 36/36/36 m/min Anzahl der Werkzeugplätze / tool places in ATC 24 Antriebsleistung Spindel / drive capacity spindle 11,5 kW Gewicht der Maschine ca. / weight ca. 4000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS ...
swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...
die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.
die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.
Key data: 75 KW, 80 kVA, 400 V
Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013
Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)
Key data: 70 KW, 80 kVA, 400 V
Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator from 2013 with 58,278 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02060 108 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Hours: 58,278 Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299161/1 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013
CNC machining center Type: Integrex J-200 S Manufacturer: Mazak Year: 2015 Control: Mazatrol SmoothG 5-axis turning + milling in one clamping X: 450 mm Y: 200 mm Z: 960 mm B axis C axis Main spindle speed: 5000 rpm Subspindle: allows complete machining from both sides without re-clamping Max working diameter: 500 mm Max working length: 910 mm Tool tray: 36 positions Capto C6 / PSC63 Internal cooling A large number of accessories (jaws, clamps, holders, etc.) Part of the sale is a functional post-processor for SolidCAM Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -
A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible.
used
hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg
Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200
CONTROLS CNC controls MAZATROL 640 T NEXUS WORKING RANGE TURNING turning diameter (max): 380 mm bar diameter (max): 65 mm worpiece length max.: 575 mm MAIN SPINDLE spindle revolutions (max): 5000 /min drive power: 26 kW COUNTER SPINDLE spindle revolutions (max): 6000 /min drive power: 11 kW X/Z SLIDE Z-axis travel: 575 mm X-axis travel: 230 mm Y-axis travel: 585 mm number of tool positions (total): 12 - rotation speeds (max): 4500 /min - drive power: 5.5 kW Additional options• Kitagawa BB-08 3-jaw chuck• Kitagawa B-206 3-jaw chuck• Parts catcher• Interface for bar feeder• Tool holder package, including driven holders• Coolant pump• Chip conveyor
Spiral mixer extendable Diosna SPV 200 AF/T - Spiral mixer extendable - for max. 200 kg dough bzw. max. 125kg flour - 2 speeds - With digital foil display - Stainless steel spiral - With pliers lock - Boiler is with friction wheel drive - Head hydraulically lifting and lowering
Offer 26114 Technical data: - Bending process is carried out by hand, supported by counterweight - Clamping of the upper beam via eccentric lever + foot pedal - Max. working width 2040 mm - Max. material thickness St 40 1.00 mm - Bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 70 mm - Max. adjustability bending beam 10 mm - Space requirement approx. W 2800 x H 1200 x D 900 mm - Weight approx. 520 kg - various bending rails as shown
Encoder Heidenhain da magazzino ricambi, no smontaggio
SCHEDA ELETTRONICA SERVO COMANDO - KEBA Modello: CU 201/A Codice produttore: 19321 Condizioni: completa della scheda elettronica pc CI 021/A
Controllo: CC-200; Euromap: 200/80; spessore stampo: 450 min; corsa piano mobile: 357.
Macchinario accessoriata di robot Sytrama modello 251 G e nastro trasportatore
PRESSA PER SILICONE Riscaldamento stampo 12 zone canali acqua 2 zone controllo termoregolatori 6 zone Gruppo pompaggio WAGNER Reinhardt-Technik mod. LSR 200l e Twin anno 2017. Euromap: 2000-675; spessore stampo: 500; corsa piano mobile: 650.
Servovalvola Rexroth 4WRAP 6 W7-04-30/G24K4/M + 4WRKE 16 E1-200L-31/6EG24EK31/A5D3M da magazzino ricambi no smontaggio
Excellent condition - Fully operational - Loading / Transport possible! Sanding width approx. 1350 mm Workpiece thickness from 4 mm up to 170 mm Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW Belt conveyor with variable feed speed Feed motor power 4 KW Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18.50 KW, with blowers Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers Aggregate 4: brush unit HYDRA RTC electronic management control, Windows environment
Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...
Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg
: neu : ca. 8 Wochen ab Auftragse : Italien : 173600 € : 3281.04 € : 200 to : 7 mm : 1350 mm : 800 mm : 250 mm : 18 - 180 mm : 35 - 50 1/min : 900x570 mm : 8 : 110 mm : 410 mm : 820 mm : 22 kW : 1500 mm : 2633 mm : 3950 mm : 20000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector PRICE FCA I ...
Horizontal turning machine manufactured in 2018. This Mazak QUICK TURN 200MA L features a maximum workpiece diameter of à 360 mm and a maximum workpiece length of 535 mm. It is equipped with a spindle speed of 5,000 rpm and a turret with 12 VDI positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN 200MA L machine we have for sale. Contact us for further details.
Dimensions (L/W/H): 2570x1100x2490 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.
This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
