diesel man 20 used for sale

Drautz lye machine with 2 pullers. and some spare parts Plant technically checked and cleaned. Total length: 3.60m. Hinge folded up 2.50m Width 1.00m Weight 200 kg

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Drill hole Ø: 11 mm Weight: 0.250 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

Manufacturer: MWM Model: TCG 2016 V8 C CHP unit 1 Operating Hours: 22,057 h CHP unit 2 Operating Hours: 9,112 h In addition to the two units themselves, the sale also includes exhaust gas heat exchangers, engine and auxiliary drive control systems, visualization, and a comprehensive spare parts package. Performance Data (Biogas, 50 Hz) - Electrical Output: 400 kWₑ - Voltage / Frequency: 400 V / 50 Hz - Speed: 1500 rpm - Generator: Marelli MJB 355 MB4 - Motor Management System: TEM EVO Efficiency - Electrical Efficiency: 38.0 – 46.4% - Thermal Efficiency: 40.4 – 43.6% - Total Efficiency: Up to 84.4% Engine Configuration - Type: V8 - Bore / Stroke / Displacement: 132 mm / 160 mm / 17.5 liters - Fuel Type: Biogas Heat Recovery (±8%) - Cooling Water Heat: 2080 kW - Mixture Cooler Heat: 5340 kW - Oil Heat: 12000 kW - Exhaust Heat (at cooling): 1136 kW - Radiant Heat (Engine ...

1). Filling Machine: SIG Combibloc CFA209-32 , year: 2004 2). Buffer Table: Meurer CM/HSP, year: 2006 3). Capper: SIG all Cap, ACF , year: 2004 4). Tray Packer: Meurer HTW Wrap around, year: 2006 Volume: 500 ml , 750 ml, 1000 ml Machine output: 9000 p/h

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

DAEWOO LYNX 200B LATHE with FANUC control system

1 used K1 carpentry machine overhauled by Hundegger in 2020 with full equipment 4-axis system, machine in one piece 18 m long and weighing approx. 15 t. Max. wood cross-section that can be processed: 300 mm x 450 mm With dovetail cutter and much more. IMMEDIATELY available, system set up and ready for demonstration. With all used tools to the system Sale as seen from location Germany without warranty. Payment immediately upon receipt of the invoice without deduction. The price is without disassembly, loading, packing, customs fees, transportation, etc. Machine is fully functional. More details will be available on your request.

Key data: 2000 mm, 3 mm

Cutting length adjustment, foot pedal, without stop Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out (or in the existing state for 3,500 €) Sheet width: 2000 mm Sheet thickness steel: 3.0 mm Colour: white Machine weight: 2500 kg Dimensions: 2800 x 1800 x 1500 mm with cutting gap adjustment Connected voltage: 16 A Hold-down: hydraulic Column projection: 250 mm Projection: 60 mm Fixed cutting angle Machine Number: 2892

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

Walter Helitronic RtWN 200 NEGI-U

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

Key data: 1364 KW, 400 V

For Sale: MWM TCG 2020 V16 – 1,364 kW – Year 2007 – Zero Operating Hours We are offering a like-new MWM TCG 2020 V16 gas engine, with zero operating hours, manufactured in 2007. This engine has never been used and is available for immediate deployment. Key Specifications: Model: MWM TCG 2020 V16 Power Output: 1,364 kW Year of Manufacture: 2007 Operating Hours: 0 (unused) Included Scope of Supply: Cooling table Oil tank Circuit breaker Control panel Gas train

2 lactose decanter systems, One is from Sharpes, Alfa Laval Group, Machine built in 1990, overhauled Order No. ZM 6063/90, Masch, No. 2312 Speed max. 3250 rpm, drum diam. 355.6 mm The 2nd machine is from Geißel Maschinenbau GmbH 97246 Eibelstadt Masch. No. 2367 from 1992 Drum diameter 355 mm, speed max. 3,150 per min.

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

weight: 25 kg taper MK: 0 Consisting fo following modules: 4 pcs Multi Quick MQ200 complete 200-160-2428 4 pcs structural element B50 053-200-2428 4 pcs. structural elementB50 053-110-2428 4 pcs. tension shoe 100-2-205-25 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1270 mm, 2 mm

Max. bending length: 1270 mm Max. sheet thickness: 2.25 mm steel Bending rail ground Manual backgauge 1200 kg

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Weight: approx. 500 kg

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 850 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Manufacturer: ENGEL Model: VICTORY 940/200 Electric Year of Manufacture: 2007 Type of Machine: Injection Molding Machine Weight: 14,900 kg Tonnage : 200 SC Ø: 60 Operating hours: 98,485 Find more here - / Contact us at -

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-

Roller conveyor with drive SFB conveyor technology type ITF / R-KT 50Roller conveyor with driven carrier rollers, roller conveyorMachine- No: 201800954/2 Year of construction 2019Roller conveyor length: 2000 mmUsable roller width: 500 mmRoller diameter: 50 mmNumber of rollers: 21 piecesRoller spacing: 100 mmConveyor speed: approx. 8 meters/minMotor power: 0.12 kWNet connection: 400 volts, 50 Hz- chain drive via SEW gear motor- all rollers driven with freewheel in both directions- ball-bearing steel rollers- Frame profile made of 3 mm U-steel with

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2000 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles : 4,109,156,293 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: ENGEL Model: VICTORY 940/200 Electric Year of Manufacture: 2007 Type of Machine: Injection Molding Machine Weight: 14,900 kg Tonnage : 200 SC Ø: 60 Operating hours: 98,485 Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2001 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :1,776,716,771 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2000 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles : 4,109,156,293 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

FETTE Terminal Data Control Type 2080 Year 1989

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2001 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :1,776,716,771 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Year: 2001 serial number: 0940/01 operating pressure: 8 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

sheet width: 2000 mm sheet thickness - max.: 6 mm connected load: 7,5 kW : . with crowbar: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.

Table dimensions X/Y: 760mm/200mm, max. sanding length: 500mm, max. sanding width: 230mm, table spindle center distance: 520mm, table longitudinal movement: 30m/min, table transverse movement: 16mm/stroke. Grinding wheel diameter: 225mm, grinding wheel width: 25mm, bore: 51mm, power: 5kW. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1950mm, weight: approx. 2100kg. On-site inspection is possible.

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.