diesel man 20 used for sale

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm -Art.No.: 4420-01 -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG

Injection mortar, two-component adhesive, chemical anchors -Manufacturer:BeA, industrial staples staples type HIT-HY 200-A -Quantity: 12 pieces of injection mortar available -Price: per piece -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/piece

Data light barrier, retro-reflective light barrier, light barrier, optical data transmission -Manufacturer: Lenze, optical data transmission data light barrier -Type: DDLS 200/120.2-10 -Voltage: 18-30V DC -Dimension: 190/85/H110 mm -Weight: 1.2 kg

I sell an automatic pneumatic cross-cut saw GreCon Dimter 2004, built in 1992. Entrance table automatic / continuous system Exit table 3 ejectors on the left outlet table. Length: 15.50m Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. Spare parts and documents included.

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Height 2300 mm Width 2700 mm Length 2200 mm Weight 5000 kg Power supply: 400V 50Hz 3N Total power 102 kW Main Material Stainless steel, acid-resistant Cutter Type Vacuum Bowl Cutter Cutter bowl made Stainless steel, acid-resistant Bowl capacity 200 l Number of knives on the head 6 pcs. Knife shaft speed 680-5050rpm Bowl speed 4-16 rpm

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid version, with drawer and vice -Workbench: 2000/720/ H940 mm -Vise: 460/160/H175 mm -Clamping jaws: 150 x 25 mm, clamping width: 195 mm -Total weight: 122 kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: ABW Revolving center point -Type: ZN 206 -Recording: MK6 -Total dimensions: Ø 140 x 370 mm -Weight: 15.4 kg

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: ABW, live center -Type: ZN 205 -Intake: MK5 -Number: 6x center point available -Price per piece -Dimension: Ø 92 x 272 mm -Weight: 4.7 kg /pc.

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Weight: 64 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm -Quantity: 7 pieces -Price per piece -Weight: 66 kg

Key data: 700 kN, 35 mm

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%):  ...

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION

Sound level meter, sound level meter, sond level meter -Manufacturer: Voltcraft, Sond Level Meter sound level meter -Type: 33-2050 -Part No.: 100609 -Dimensions: 170/60/H50 mm -Weight: 0.3 kg

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid construction, mobile -Width: 2000mm -Depth: 800 mm -Height: 850mm -Table top: thickness 25 mm -Base: 4 swivel castors, 2x with parking brake -Quantity: 20 pieces -Price per piece -Weight: 51 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, rotating center point -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 70 x 220 mm -Weight: 2.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, rotating center point -Type: ZNA 205 -Recording: MK5 -Centering point: Ø 28 mm, without point -Dimensions: Ø 90 x 225 mm -Weight: 4.3 kg

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.

Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 200 LZ2 -Power: 37 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Dimensions: 735/480/H410mm -Weight: 288 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Atlanta, gearbox type 58 83 209 -Translation: i= 9.25 -Shafts: Ø 25 x 135 mm / Ø 15 x 28 mm see photos -Dimensions: 220/137/H165 mm -Weight: 7.3 kg

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Staff, screw jack -Type: Size 05 Version A -Useful stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm -Dimensions: 120/830/H315 mm -Weight: 2.2 kg

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 208 mm -Groove width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 230/80/H50 mm -Weight: 4.3 kg

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg

Fan, ventilator, blower, duct fan, pipe fan -Manufacturer: SEW-Eurodrive ebmpapst, fan blower ventilator -Type: A4S 200-AA 02-01 0.042 kW / 1350 rpm -Voltage: 230 V -Dimensions: 225/210/H210 mm -Weight: 2.9 kg

Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 203 mm -Mount: M70 x 6.5 -Hole circle: Ø150 mm / M12 / Ø126/17 mm -Dimensions total Ø 203 x 60 mm -Weight: 6.4 kg

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Steinmeyer, micrometer -Measuring range: 175-200 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 375/205/H35 mm -Weight: 1.3 kg

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

roller chain, drive chain, single roller chain -Manufacturer: Witra, drive chain single roller chain type 20B -Length: 3200 mm -Pitch: 31.75 mm 1 1/4 / Width 43.2 mm -Rollers: Ø 19.05 mm -Quantity: 36x roller chain available -Price: per chain -Package dimensions: Ø 330 x 180 mm -Weight: 11.9 kg/piece

MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

Key data: 800 KW

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

faceplate diameter: 1250 mm turning diameter over slide rest: 2040 mm turning length: mm total power requirement: 55 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m Brand Zerbst Machine no D982 Type DP 1 - 2.040 Ø Digital readout Maximum turning diameter 2.040 mm ø Passage 98 mm ø 4-Jaw Chuck 1.250 mm ø Speed 4,5 - 224 RPM Separate chisel support Engine power 55 kW Excluding slot table Quick-change holder Machine weight 12.000 kg Dimensions: Head: 2.500 x 1.800 x 1.700 mm support: 2.200 x 1.800 x 2.000 mm Electrical panel: 2.200 x 600 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

coolant capacity: 20 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380/660 V / 60 Hz motor type: LA 3166 motor speed: 1460 U/min Motor Capacity: 15 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Electric power: 42 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 186 Length: 176 Height: 172