137,505 used machines on RESALE, but how to find them? Machine Search
- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...
Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.
with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg
- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...
- Cover Lid MWM 12141950 - Suitable for several motors - Please note! Price per piece! - References -> 12141951 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.
- Cover Lid MWM 12141938 - Suitable for several motors - Please note! Price per piece! - References -> 12141939 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...
McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)
Was installed in a Husky injection moulding machine
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
4-way push-mast forklift Manufacturer: BT Model: FRT 2000/4 Built: 1984 Capacity: 2000 kg Triplex mast Lifting height: 5400 mm Battery Voltage: 24V Charger Weight device Side driving possible Fork extension Condition: used, but fully functional
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
- Bracket holder MWM 12420933 - Suitable for several motors - Please note! Price per piece! - References -> 12302372 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and i ...
Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.
- Intake manifold air intake pipe MWM 12452139 - Suitable for several motors - Please note! Price per piece! - References -> 12452137 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constant ...
-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile
- Intake manifold air intake manifold MWM 12136619 - Suitable for several motors - Please note! Price per piece! - References -> 12136620 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...
- Flywheel 12140756 + Gear rim (verm. 12028066) MWM - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and pr ...
2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.
- Cooling water line cooling water pipe MWM 12300128 - Suitable for several motors - Please note! Price per piece! - References -> 12300129 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By co ...
- Exhaust Branch 12300088 + Bracket 12300168 - Suitable for multiple motors! - Please note! Price per piece! - References -> The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapt ...
- Exhaust Branch Exhaust Nozzle MWM - Suitable for several motors - Please note! Price per piece! - probably 1230 0468 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting ...
- Oil line MWM 12303498 - Suitable for several motors - Please note! Price per piece! - References -> 12303499 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...
- Crankc. end cover MWM 12307982 - Suitable for several motors - Please note! Price per piece! - References -> 12307983 & 12027708 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly ...
- Ganged Valve MWM 12301106 - Suitable for several motors - Please note! Price per piece! - 12301106 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...
- Bracket MWM 12420190 - Suitable for several motors - Please note! Price per piece! - 12420190 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...
Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm
new ! all stainless steel capacity 200 L. mobile 40 kg quality According to DIN 9797
Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN ...
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
- Plug MWM 12302731 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and proc ...
- Cooling water line MWM 12300538 - Suitable for several motors - Please note! Price per piece! - References- > 12300535 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...
- Bracket MWM 12302180 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and p ...
- Cooling water line MWM 12300048 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency
- Valve bridge MWM 12129392 - Suitable for several motors - Please note! Price per piece! - References -> 12136467 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and int ...
Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg
Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP
- Oil level control MWM 12480505 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technolo ...
- Charge air cooler MWM - Suitable for several motors - Please note! Price per piece! It is a scrap part. - References -> 12301219 - 12141936 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By ...
Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact
- Hatch cover MWM 12302310 - Suitable for several motors - Please note! Price per piece! - References -> 12302310 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and inte ...
- Cover MWM 12302480 - Suitable for several motors - Please note! Price per piece! - References -> 12302480 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrati ...
Kragarm regal, double-sided, 3.50m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1,750.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable each. Arms 1.20 m, 500kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 3500mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
- Air cleaner fastening MWM 12300402 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new tech ...
Kragarm regal, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1.995.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable each. Arms 1.20 m, 750kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 4160mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
- Raw water line MWM 12141963 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologie ...
Kragarm regal, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1,850.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable each. Arms 1.20 m, 500kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 4160mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
maximum number of results exceeded
please refine your search
