127,890 used machines on RESALE, but how to find them? Machine Search
various knife head fraesers / plan fraesers 200, 215 250 mm
Industrial washing machine for small parts Turbex Binitron 2000, machine no. 94252, 400V 50Hz 25A, see also pictures
The CD100 series of water and water jet machines ranges from 250 to 2050 bar with pump flows from 21 to 167 l/min. The pump is powered by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel to ensure long service life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are equipped with rubber feet under all four corners and the machine has forklift pockets as well as hanging eyelets at all four corners. The machines have galvanized roof panels with side railings for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1 ...
The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...
Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,950 mm CS-Sigma.: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)
Simonazzi Tribblock 100-100 15 100 spray heads, 100 filling valves and 15 capping heads. Performance: 0.5 lt / 32,000 FL/h 1. 0lt / 29,000 FL/h 1.5 lt / 22,000 FL/h 2,0 lt / 18,000 FL/h Machine in very good maintained condition
Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,650 mm CS-Sigma.: ca, 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)
Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!
Doppelschleifbock Manufacturer: FAMO Type: G-200 A Diameter of grinding wheel: 200 mm 0,75 kW 2800 RPM All information without guarantee
Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation
Helium leak detector Manufacturer: Leybold Type: UL 200 Condition: Tested and ready to use Execution: Lubricated & dry available! Connection: 230V Time of delivery: 1 where. (u.ue.V.; ready for operation
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.
Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation
Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation
Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...
Material: Stainless steel 1.4301 Drive: 4 KW Weight: 1550 kg Area per deck: 2,6 m² Incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm.
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...
MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark
MAZAK INTEGREX turning/milling center 200Y Bu. 1999 Mazatrol fusion control Max Drehdurchm. 520 mm Max Schwingdurchm. 540 mm Maximum turning length 1,018 mm Bar passage 51 mm C-axis + angetr. Tools Y-axis +/-70 mm Distance between the top 500 mm Drive 30 kW Maximum main spindle spindle speed 5,000 rpm Maximum speed milling spindle 6,000 rpm Tool changer with 40 stations 3-jaw Chuck 200 mm Tool measuring arm Tailstock Chip conveyor Total connected load 31 kVA Machine dimensions 3.50 m x 2.10 m x 2.50 m Machine weight 6,800 kG 25 tool holder KM 36 duty hours approx. 36,000
Available in two versions - single-phase and three-phase The construction is made entirely of stainless steel AISI -304 construction Easy operation process. A safety system where the belt stops working in an emergency. ON – OFF switch on a button Security system when opening the door Easy cleaning with water pressure CE certified machine Supplied with a set of strips, and on order, strips for frozen and chilled meat are supplied. Technical data: Wheel diameter 200 mm. Motor power 0.75 kW, 230 /400V, three-phase Equipped with a special plate for adjusting the thickness of the pieces and a piston Tape length: 1,600 mm. Machine weight 57 kg.
Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...
Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die
Technical data: -Lifting capacity 2000 kg -max load capacity horiz. 3500 kp -Faceplate hub 1750 x 1750 mm -Drehkreuzverängerungen -Faceplate geared motor Tiltable 0-90 ° -Rotation Electr. adjustable 0.2-1.5 m / min -Right - left rotation - welding current transmission 1200 A -400 V - table height in horiz drive. Position with frame approx. 2070 mm -Table height at horiz. Position without stand approx. 940 mm -Space requirement approx. B 1650 x H 1130 / 940 x H 2500 mm -Weight approx. 2.2 t
Spare welding controllers for resistance welding machines MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1
to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm
Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober
2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...
Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg
Precision roller screw, RGTB 48.25.1500/2052, GSA AG, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Roller screw, type RGTB 48.25.1500/2052 R Kl.10 2AB, GSA (Gewinde Ziegler AG Switzerland) Roller thread diameter 48 mm, Lead 25 mm, Thread length 1500 mm Length of roller thread nut 113 mm, Max. Total stroke 1387 mm, Total length of spindle 2052 mm Diameter for coupling with motor 35 mm Diameter bearing seat A 40 mm, diameter bearing seat B 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand pa ...
Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request
Machine type TIG inverter welding system gas-cooled DC and AC system Brand Hugong Type Wave 200 D III Supply voltage 1 x 400 Volt = plug 5 / 16 A Adjustment range 5 – 200 amperes Duty cycle 15 % ED at 200 amps 60% ED at 153 amps 100% ED at 118 amps Current adjustment infinitely variable weldable material thickness steel / VA: 5 mm Aluminium: 3 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system version Fuse 16 Ampere Dimensions L x W x H 500 x 240 x 410 mm Weight 20 kg Age 6 months Condition workshop tested as new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 26, Flex, 4 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 piece instruction ma ...
Mobile u scales for fine weighing Model UV 2000 Weighing capacity 2000 kg Accuracy in +/-2 kg Number of sensors 4 pcs. Height 120 mm Weight 38 kg Made in Denmark
Mobile Solar Power MS-2000 (Ref. No. 504-2626) Battery capacity: 600'000 A/h, or 2'220 W/h Power: 2'000W, max. 5'000W Battery Type: ternary lithium-polymer battery Size: 320x230x335mm Adapter: DC 25.5V/8A, 204W max. Solar Power: 18V 10A 180W Recommended design: 100W 17.6V, 5.68A solar panel Direct charging DC: 12V 4.5A AC output: 220V 50Hz/110V 60Hz AC output 3 ports: 2000W, max 5000W Connections: USBX2:5V, 3.1A max. QC3.0X1:5V/3A,9V/2A,12V/1.5A DC output: 12V, 7A max. PD type-C X1: PD 60W, 5V/3a, 9V/3a, 12V/3a, 15V/3a, 20V/2.2A (bidirectional) Cigarette lighter 13V / 10 MS-SP200/200W 200W solar panel as portable power plant 2000W, MS-SP200/200W Peak Power : 200W Efficiency of the cells: MONO >19% Cable length: 2M/14AWG Output : 19V Material: PET+EVA+Solar cell+EVA+PCB+Nylon Color: Black & Orange AC input power supply Vehicle Charger Cable DC 100W ...
technical details gearbox: - Speed range output shaft: 18 - 49 rpm - Torque: 10.5 mkp = 103 Nm - infinitely adjustable via handwheel Technical data engine: - Manufacturer: BBC / YQU 80 MC 2a - Number: GS 608117 - 33 - Voltage: 380/200 V - Current: 2.6/4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Cos φ: 0.86 - Speed: 2,860 rpm - Total weight: 40 kg - Dimensions: 600 x 280 mm - Hole dimensions base plate: 90 mm longitudinal / 140 mm wide - Transport dimensions: 700 x 450 mm (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...
16 to. Krankatze, Kone, CXT, (chassis, rope, hook) – used - : Price from location: 12.500.-€ (net), dismantled and loaded! Not part of the sale are: bridge, remote control, coil hooks. Manafacture: Kone Year of construction: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric hoist type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Load capacity 16,000 kg Lifting height 10.5 m Drum pulling force - Unwindable rope length – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Scrutinies Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory Number - Type of c ...
AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850
Tube filling and closing machine for metall tubes. Machine comes in line with IWKA-cartoning machine, type Cartonpac CPS-R.
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition
RECON Part number: 1216 1230 Main bearing standard dimensions New camshaft bearings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Kramer + Grebe VSM 200 STL 200 litre vacuum bowl cutter stainless steel bowl variable knife speed two bowl speeds loading device for 200 liter standard trolleys unloader
The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
maximum number of results exceeded
please refine your search
