diesel man 20 used for sale

Manually operated works fully cardan powered without a computer. Auction-ID: A3-43534-17101

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3540

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.23 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1134

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3469

Diameter 127cm height 94 cm ⚠️This lot is part of a combination — read carefully before bidding This lot is part of the combination n°101 which includes the items n°101... Nos. 11, 12, 13, 14 and 28. Closing: The combination will close approximately 20 minutes after the last individual lot in the combination closes. Adjudication: At closing, two scenarios are possible: - If the bid on the combination exceeds the sum of the best individual bids → the combination is awarded, the individual lots will be void. - If the bid on the combination is less than this amount → the individual lots are sold separately, the combination will not be accepted. Auction-ID: A1-45912-28

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ES_siuCTPRE Former Linde full-service machine next service due in 498 hours next UVV not due until 02/2027 - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork adjuster with sideshift Auction-ID: A1-45453-203

With auxiliary crane hiab 211 hippopotamus 21t/m 6x2 with steering axles Lifting New container lifter with remote control Towbar Backup camera Air conditioning Maintenance done, gearbox redone, brakes redone, steering axle overhauled, tyres 60% Problems: water circuit leak, cylinder support welding, slight oil leak, bodywork lamps to be reviewed Sold as is Auction-ID: A3-44485-35401

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/tSSD3XAv6j0 - Former Linde full-service device - UVV valid until 10/2026 - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Load protection grille (can be easily dismantled) - Full cabin with heater and windshield wipers - White non-marking tires - LED front work light - LED work light at the rear - Comfort seat with lumbar support - LPG gas exchange bottle (quick to exchange, available everywhere) - ATTENTION: Engine was overhauled in 2024. Reliable Perkins engine. Auction-ID: A1-45453-113

Length 5998mm, high cargo space - working air conditioning - navigation - reversing camera - line assistance - parking sensors - low fog lights - attention: minor body damage, both mirrors damaged + sliding door needs to be repaired - overall neat condition - starts, drives, brakes smoothly, good tyres Auction-ID: A3-44485-10663

Bobcat E85 Hydraulic quick coupler CW10 3 bins (Slots, Teeth, trunk Hose bridge system for lifting and hoisting start, drive and execute what it needs to do Auction-ID: A3-43534-11424

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3686

SISMA industrial laser machine, model SARTY 200F, designed for welding, repair or precision work applications in industrial and technical environments. Italian manufacture recognized for its quality and precision. Rugged professional equipment suitable for specialized workshops, precision industries or technical work requiring high-performance laser technology. Features: Brand: SISMA Model: SARTY 200F Type: Industrial Laser Serial Number: L1001764010 Year: 2010 Manufacture: Made in Italy Power supply: 200/240V – 50/60Hz Power: 1400W Consumption: 0.7 kW Dimensions: L127 x H210 x W90 cm Weight: 196 kg Condition: Sold as is. Professional equipment that may show traces of use related to its industrial operation. Auction-ID: A1-46647-66

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

For lithium batteries from 82-410Ah REMA Battery Connector 220V plug Auction-ID: A1-45453-3591

Offered for sale: a Fiat Ducato light truck (category N1) from July 2014 with about minus 199800km on the odometer. The vehicle has recently suffered fire damage and is being sold in its current condition. Until the damage, the vehicle was technically in full order (inspection certificate valid until 04/07/2025 available). An interesting basis for export, repair or as a donor vehicle for valuable parts. Do not currently start and drive Make/Model: Fiat DucatoType: Light truck (Driver's license B, fiscally attractive)Year of manufacture: 03/07/2014Mileage: 198,293 km (checked by inspection)License plate: Belgian registration, Documents: Belgian inspection certificate availableCondition of the vehicle:The vehicle has fire damage (see photos for the exact extent). Sold in the condition in which it is (\"take it with you\"). To provide suitable transport for pick-up. Roofs and furnishings in ...

Machine type: Filling machine (rotary) Manufacturer: ATM GROUP Model: PAC 9.0 -20/P Year: 2016 Serial number: 316/2016 Control: SIEMENS SIMATIC HMI Application: Filling of pâtés and meat stuffings Filling system: Volumetric dosing Technical data: - Dose range: 50 – 200 ml - Product temperature: up to 60 °C - Output: approx. 6,000 – 10,000 cups/h - Packaging type: Aluminium cups Ø 83 mm (suitable for sterilisation) Machine configuration: - Rotary indexing table - Multi-head dosing station - Product hopper (stainless steel) - Cup feeding / handling system - Conveyor / transfer section - Safety enclosure with access doors - Integrated control cabinet with HMI Remarks: Stainless steel construction suitable for food industry. Condition used. Own mass: approx. 2,400 kg Dimensions (LxWxH): approx. 2,721 x 2,248 x 2,250 mm Auction-ID: A7-46941-2

Air filter has recently been replaced Oil/filter still needs to be done Fire service notification Few hours Quick coupler cv10 Machine is little used Auction-ID: A3-43534-19210

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtube.com/shorts/BSH_Z1XlTdE - Former Linde full-service device - Service valid until 05/2027 - UVV valid until 05/2027 - Battery:04/2018, 80V/5PzS/775Ah, very good performance measured with 85V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Comfort seat with lumbar support and seat heating Auction-ID: A1-45453-133

CABLE WINCH ELECTRIC 12V, 2000 LBS Winch 12 Volt, horizontal pulling force approximately 900 kilos, (2000 Lbs) Includes approximately 15 meters of cable with safety hook. With manual operation. Winch up and down electrically. Easy assembly. Consumes 120 amps at 907 kg. Auction-ID: A1-46851-86

Youtube function and status video: https://youtu.be/C7fSuG3ugzs Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 49/2018 48V 500 Ah, with very good performance; measured with 50.6V - Duplex mast with full free lift - 3rd valve; Sideshift - Load protection grille (can be easily dismantled) - Facelift model with tilt angle display (practical for sensitive goods) - Conversion to one-pedal control Auction-ID: A1-45453-194

Batteries from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1127

3 PIECES 24V 375Ah batteries from former Linde Service Very good performance measured at 24.99, 25.05 and 25.46V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1132

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.90 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1123

For sale is an unused CIMM ACS CE membrane expansion vessel with a volume of 24 l from the stock of a dissolved installation company. The container has been stored in a dry and cool place and is visually in good condition. Equipment: • Original EU goods made in Italy • Expansion vessel for the EU and German market • Suitable for domestic water / drinking water, heating systems and, depending on the version, also solar thermal energy • Branded goods from CIMM and VAREM • CIMM versions available with 24 L, 35 L and 50 L, among others • VAREM versions available with 80 l and 100 l • High-quality manufacturer • Several pieces available depending on size Notes: • Unused goods from installation company liquidation • Store in a dry and cool place out of direct sunlight • Other sizes optionally available High-quality branded expansion tank made in Europe,  ...

Toyota 02-7FDF25 Maintenance every 250 hours Annual Large / Liquids + Filters Works fine Auction-ID: A3-43535-19202

Professional high-capacity (1200 L) sandblasting cabinet, model XH-SBC1200, never commissioned. Complete equipment with cyclonic filter, guns, nozzles, spare windows, pneumatic controls and piping. Ideal for surface preparation, mechanical restoration, bodywork or industrial work requiring intensive sandblasting. The machine is perfectly clean, complete and has never been used. Features: Model: Sandblaster Cabinet 1200 L – XH-SBC1200 Serial Number: S122104-004 Usable capacity: 1150 L Design pressure: 8.6 bar Design temperature: +15 / 0 °C Weight: 215 kg Power supply: 230 V – 50 Hz – 1200 W Standard: EN1248 CE marking Date of manufacture: 06/2021 Medium: Air + Abrasive Equipment included: Cyclone filter / dust settler Built-in gloves and interior lighting Sandblasting gun + nozzles (new) Pneumatic hoses Pedal control Replacement protective glass Metal frame on wheels All accessorie ...

The car starts and drives without any problems. See photos for details, documents available. Auction-ID: A3-44485-4650

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3689

Viewing by appointment Auction-ID: A1-40252-58

starts, drives and brakes - working air conditioning - 6 gears - signs of wear both inside and outside (see photos); Handle case is defective so does not open at the moment - dashboard notification - validation key is missing Auction-ID: A3-44485-10993

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3688

TRUMPF industrial laser machine, model TruMark 3000, designed for high-precision industrial marking, engraving and identification applications. This professional equipment is suitable for industrial environments requiring reliable and durable marking on different types of materials. Manufacturing recognized for its quality and performance in the field of industrial laser technologies. Features: Brand: TRUMPF Model: TruMark 3000 Type: Industrial Laser Marking Date: October 2011 Serial Number: E1052A0843 Power supply: 100–240V – 50/60Hz Dimensions: L122 x H163 x W65 cm Weight: 234 kg Condition: Sold as is. Professional equipment that may show traces of use related to its industrial operation. Auction-ID: A1-46647-65

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3382

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/KyL_tqil_wI - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 10/05/2019 48V 5PzS 625Ah, very good performance measured at 49.7V - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - Windshield with windshield wiper - White non-marking tires - LED front work light - LED work light at the rear - Rear camera - Front camera - Comfort seat with lumbar support and seat heating - Integrated charger Auction-ID: A1-45453-111

Youtube function and status video: https://youtu.be/UWKEgI4svU0 Former Linde full-service machine Battery: 14/2020, 24V 375Ah, with very good performance, measured at 25.0 volts Auction-ID: A1-45453-398

Linde H25D 16240h serviced Maintenance every 250 hours Annual major maintenance with filters and fluids Works fine Auction-ID: A3-43535-19201

Battery for Linde E70 and E80 from former Linde service, measured with very good performance 88.89V 80V 1.376Ah 80V/8PzS/1376Ah Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1156

EDGETEQ S380 – Edge Banding Machine General data: Model: EDGETEQ S380 Year of manufacture: 2021 Serial number: 0-261-73-9063 Operating hours: 17486 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The EDGETEQ S380 is suitable for high-quality woodworking applications, ensuring efficient and accurate processing in production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-3

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jkFSkRyY75c - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 80V 5PzS 775Ah, very good performance measured with 82.7V - Clear-view mast without central hydraulic cylinder - 3rd valve; with sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45453-60

Irisbus 2798 cc Manual gearbox 23 Seats (incl. driver) First Owner 120.000 Original kilometers Lighting above seats Ventilation grilles Spare wheel Radio/CD player TRADER OR EXPORT The car drives and starts perfectly Inspected 1000km ago Auction-ID: A3-44485-5768

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

DAF CF with the following features: - Skycab cabin with Skylights - Air horns - Flashing lights - Side skirts - MOT - Alcoa rims with 70/80% tires - 9 tonne front axle - Rear window - Ad-free - Traxon gearbox - New type of tacho Auction-ID: A1-40252-94

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3639

Battery from former Linde Service Very good performance measured at 25.1V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1145

Battery from former Linde Service, measured with very good performance 50.1V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1139

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Vehicle for many parts trace use, retro, interior, removal AVENUE DES CROCUS 4 BRUSSELS Postal Code 1070 City BRUSSELS Auction-ID: A3-44485-30285

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3656

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/x3tg9I5ps6k - Former Linde full-service device - Battery: 44/2023 48V 375 Ah, very good performance measured with 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45453-318

For lithium batteries from 82-410Ah REMA Battery Connector 220V plug Auction-ID: A1-45453-3590