diesel man 20 used for sale

Starthole Drilling Machine / Super Drill EDM Starthole Drilling Machine (EDM) for the production of starting and through holes in hard materials, e.g. for die-sinking EDM or wire EDM. Manufacturer: CASTEK Mechatron Ind. Co., Ltd.Model: HK-24 Year: 02 / 2002 Serial No.: 9024080 Equipment: Cross table (manual) Digital control and operating unit Protective cover / splash guard Cooling/flushing device Emergency stop operating instructions available (provisional manual HK-24) Accessories / scope of delivery: Electrode material (brass tubes, mixed, as shown) Various clamping and small parts Tool cabinet with Drawers incl. contents. Condition: Used Normal signs of wear due to age and use Machine comes from ongoing workshop operation. Connection: 400 V / 3-phase (3 PE) Power consumption: 4.5 kVA Compressed air requirement: approx. 25 l/min Operating pressure: 4–8 kg/cm² Electrical control:  ...

\" Column-mounted slewing crane 2,000 kg with electric chain hoist – electric movement – 2 speeds For sale is a column-mounted slewing crane from Mechanik Taucha Fördertechnik GmbH, equipped with an electric chain hoist (LIFTKET). The system is designed for a load capacity of 2,000 kg and is suitable for use in workshops, production or warehouses. The movement of the hoist and boom is electric, all movements can be carried out in 2 speeds (fine/high gear). Condition: • Used, functional • Normal signs of wear present Scope of delivery: • Column slewing crane complete • Electric chain hoist with control • Manufacturer crane: Mechanik Taucha Fördertechnik GmbH • Type: ZSL 2000-4/4 • Year of construction: 2001 • Load capacity: 2,000 kg • Factory No.: 501 30171 • Lifting system: Electric chain hoist LIFTKET • Method: electric (hoist and boom) • Speeds: 2-stage ...

\" Electric chain hoist 125 / 250 kg Manufacturer / Model: LIFTKET – Hoffmann Fördertechnik GmbH Wurzen Type: KLORW 63GV8-2 Condition: Used, functional Electric chain hoist LIFTKET from German production. The chain hoist is equipped with a control bottle and has fine travel. The sale is without a crane system, only the chain hoist is offered. • Load capacity: 125 / 250 kg • Hook height: approx. 2.65 m • Manufacturer: Hoffmann Fördertechnik GmbH Wurzen (LIFTKET) • Type: KLORW 63GV8-2 • Year of construction: 2010 • Power connection: 400 V / 3 phases • Control: pendant switch • Lifting speed: with fine stroke \" Auction-ID: A7-46417-377

200-liter steel barrel from the manufacturer ADDINOL. The contents correspond to the keg marking: Product: ADDINOL XG 68 (according to the original label) Fill level: approx. 80 % Barrel type: 1A1/X/250/21 – UN-approved steel keg Auction-ID: A7-46417-3

\" Column-mounted slewing crane 1,000 kg – electric movement – 2 speeds – LIFTKET 2021 Column-mounted slewing crane from Mechanik Taucha Fördertechnik GmbH, equipped with a LIFTKET electric chain hoist (year of construction 03/2021). The crane is designed for a load capacity of 1,000 kg and has an electric movement of the hoist. All movements can be performed in 2 speeds (fine and high). Equipment: • Electric chassis (motorized) • 2 speeds (lifting/lowering) • Modern LIFTKET chain hoist (relatively new) • Stable column design Condition: • Used • Functional • Normal signs of wear • Manufacturer: Mechanik Taucha Fördertechnik GmbH • Type: GSX 1000-4.5/3.04 • Year of construction: 2001 • Load capacity: 1,000 kg • Factory No.: 501 311/3 • Hoist: LIFTKET electric chain hoist • Year of construction Hoist: 03/2021 • Process: electric (hoist) • Speeds:  ...

\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373

\" Digital crane scale / hanging scale, manufacturer KERN & Sohn GmbH, type HFM 3T0.5. Equipment / Design: – Digital crane scale / pull scale – Large LED display – HOLD function – Tare function – Robust industrial design – Top and bottom hooks with shackle – Battery operation (power supply available) – Manufacturer: KERN & Sohn GmbH – Type: HFM 3T0.5 – Max. load capacity: 3,000 kg (3 t) – Pitch: d = 0.5 kg – Supply: 12 V / 500 mA – Year of construction: 04/2015 – CE marking: available \" Auction-ID: A7-46417-145

3 Bosch condensing boilers 2000 W GC2300W Balcony box - stock of 3 pieces Auction-ID: A7-46421-101

Instep range inside: 12-24, instep range outside: 10-24, rim width: 3-14 inches, max. tire width: approx. 15, also suitable for UHP and run-flat tires (WDK-certified) Auction-ID: 04D-R9X-3

Serial Number: 11092151 • Power: 1.9 kW • Condition: Used • Additional Notes: Machine not starting – mechanical condition . Runtime meter shows 23.7 hours (low usage). Fuel: Petrol (2-stroke mix). Version: 101 • Operating weight: 66 kg • Manufactured: 06/2019 • CE Certified. Compact soil compaction machine ideal for trench work and repair jobs. Auction-ID: A7-46408-6

The distance between the needles: 10 mm; Auction-ID: A7-45992-163

Column-mounted slewing crane 800 kg with two electric chain hoists Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: GSX-D 800-5+70-5/3,2 Year of construction: 2002 Factory no.: 2000327 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 800 kg on the main boom. The system is equipped with two electric Demag chain hoists. The main lift is carried out by a Demag electric chain hoist with a payload of 800 kg. In addition, a second electric chain hoist with a load capacity of 70 kg is mounted for smaller components. The chain hoists move back and forth electrically on the respective outriggers (trolley ride). The crane is moved manually. Operation via pendant button control. Power supply via trailing cable system with mains connection switch. A test book for the crane system is available. System consisting of a column, two outriggers and two electric chain h ...

\" Workbench with drawers – approx. 2000 x 700 x 820 mm Workbench in heavy design with robust worktop and integrated drawers. The workbench is ideal for workshop, assembly or production. Equipment: • sturdy, heavy version • several drawers with storage space • large work surface • industrial construction Condition: • Used • Dimensions: approx. 2000 x 700 x 820 mm • Type: steel construction • Worktop: wood (heavily used, but functional) • Drawers: several (integrated on the side)\" Auction-ID: A7-46417-408

VOLVO FM 420 – Tipper Truck General data: Manufacturer: Volvo Model: FM 420 Year of manufacture: 2003 Engine: Diesel, 12,130 cm³ Power: 309 kW (420 HP) Transmission: Manual Drive: 6x4 Number of axles: 3 Color: White Weights: Gross vehicle weight: 33,000 kg Unladen weight: 12,250 kg Payload: approx. 20,750 kg Condition: Well maintained and regularly serviced Very good mechanical condition Ready for immediate use Description: Volvo FM 420 tipper truck in excellent working condition, suitable for construction and heavy-duty transport applications. The vehicle has been regularly maintained and requires no additional investment, making it ready for immediate deployment on site. Auction-ID: A7-46408-9

Column-mounted slewing crane 100 kg with electric chain hoist Manufacturer: Meier-Rädsch GmbH Type: SDK / GK / 100 Year of construction: 2003 Factory no.: 2003 / GK / 02 Column-mounted slewing crane make Meier-Rädsch with a load capacity of 100 kg. The crane was used for loading and unloading CNC machining centers and is particularly suitable for smaller workpieces, clamping devices or tools. The system is equipped with an ABUS electric chain hoist. The stroke is carried out electrically via the electric chain hoist. The movement of the trolley on the boom is manual (forward/backward). The crane is moved manually. Operation via pendant switch control with emergency stop. A crane inspection book in accordance with DGUV is available. System consisting of column, boom and electric chain hoist. Column-mounted slewing crane , boom approx. 2.7 m , ABUS electric chain hoist, manual trolle ...

KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine) mobile coordinate measuring machine. The system was delivered in November 2020 and is in well-maintained, functional condition. It is a complete measuring system including accessories, software and transport cases. Scope of Delivery • WM-3000 transducer • WM-P3000 Probe • WM-C3000 Control/Camera Module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 Power Cord • Laptop with WM measurement software installed • Transport case • Calibration certificate (09/2020) • Inspection Result Condition • Functional • Visually well-groomed • Calibration from 09/2020 (new factory calibration recommended) • Sale from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for the large-volume measurement of components in the range of 300 mm to 3,000 mm. Measuremen ...

Operating hours: 11000 Engine power: 160 kW Total weight: 22,100 kg Auction-ID: A7-46408-1

The distance between the needles: 10 mm; Missing needle pill; Auction-ID: A7-45992-164

There are a total of 24 pieces, 2 modules for a balcony each with inverter 420 W, 97.3 V, 4.32 A, For Outdoor Use, Durable Weatherproof Auction-ID: 049-88Z-4

Column-mounted slewing crane 100 kg with electric chain hoist Manufacturer: Meier-Rädsch GmbH Type: SDK / GK / 100 Year of construction: 2001 Factory no.: 2001/GK/01 Column-mounted slewing crane make Meier-Rädsch with a load capacity of 100 kg. The crane was used for loading and unloading CNC machining centers and is particularly suitable for smaller workpieces, clamping devices or tools. The system is equipped with an ABUS electric chain hoist. The stroke is carried out electrically via the electric chain hoist. The movement of the trolley on the boom is manual (forward/backward). The crane is moved manually. Operation via pendant switch control with emergency stop. A crane inspection book is available. System consisting of column, boom and electric chain hoist. Column-mounted slewing crane , boom approx. 2.45 m , ABUS electric chain hoist, manual trolley travel , manual swivel mo ...

\" Digital Rockwell hardness tester Ernst AT130 DR Manufacturer: Ernst Type / Model: AT130 DR Year of manufacture: 2007 Serial number: 7883 Version: digital Power supply: 230 V / 50–60 Hz Power consumption: 15 W CE marking: available Condition • Used, out of operation • Function given when removed • Usual signs of wear according to age • Calibration sticker available (05/2023) Scope of delivery • Hardness tester Ernst AT130 DR • Extensive accessory package, including: • Test benches / supports • Indenters / test stamps • Reference / comparison bodies • Wooden boxes with inserts • Cover • Test method: Rockwell • Test loads: 60 kp / 100 kp / 150 kp (switchable) • Supported Rockwell scales: HRA, HRB, HRC, HRD, HRF, HRG, HRH (depending on test specimen / indenter) • Indenter / Penetrators: 120° diamond and ball penetrators (various diameters, see accessories ...

As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A1-46003-1

\" Gauge block set / Parallel gauge blocks – Long end gauge (used) Manufacturer: Längenmesstechnik GmbH Limbach Standard: DIN EN ISO 3650 Tolerance class: Class 2 All gauge blocks with through-holes, design as precision parallel gauge blocks. Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately \" Auction-ID: A7-46417-205

REDI 125 - 87° 30 red tube stock (36 pcs); 31 pcs REDI 125 SDR 41 red color; 2 pcs REDI 160/200 SDR 41 PVC red color - - Footboard 90 x 120 x H90 Auction-ID: A7-46421-35

For driving clamps into corner joints Auction-ID: A1-46310-150

1 PC ERARA D TANK 200 - PUMP HOLDER - - 1 platform 80 x 80 x H90 Auction-ID: A7-46421-32

The facility includes 98 small lockers, 63 large lockers, 2 control terminals, colored design in green, orange and blue The software can be determined by yourself Auction-ID: 045-VFE-5

Incremental precision measurement and displacement measurement system for precise recording of small travels. The Steinmeyer/FMS IKF 10 measuring head works incrementally and is suitable for comparative and relative measurements. The measured value is displayed via the external display unit PU 11 with digital display and switchable units (mm/inch/degree). The stable mechanical design with solid base plate, rotary table and fine adjustments allows it to be used as a stationary test or measuring station, e.g. in quality assurance, production control or development. Scope of delivery:     •    Incremental precision probe / measuring head IKF 10     •    Display unit PU 11 incl. connection cable     •    Measuring stand with base plate     •&nbs ...

\" Werth CNC coordinate measuring machine OPTIMUS 300 (3-axis motorized) Werth OPTIMUS 300 optical CNC coordinate measuring machine with motorized axes X, Y and Z. Year of construction 2010. System with video image processing for optical contour recognition and motorized positioning. Version with control panel, PC system, monitor and installed measurement software. Test report dated 15.10.2024 is available. Device ready for operation from measurement room environment. • Manufacturer: Werth Messtechnik GmbH • Type: OPTIMUS 300 • Version: BAS. INSTR. 300 Z-MOT • Year: 2010 • Serial number: 10-00454 • Axes: X / Y / Z motorized • Measuring range X: 0 – 400 mm • Measuring range Y: 0 – 200 mm • Measuring range Z: motorized (working focus) • MPEE: 2.5 μm + L/40 • Sensor system: Werth probe ZTMC-2/2 V4.10 • Measurement software: Version 7.31.083 • MC control: 7.2 ...

1 Bosch condensing boiler 2000 W GC2300W Balcony box - 1 piece Auction-ID: A7-46421-103

few operating hours laboratory machine - Producer Büftering - Type SWT 325 QH - Year of construction 2015 - 1. Unit - Cross belt - Electronic sanding beam EPS - Fins belt - Sanding belt speed infinitely adjustable - 2. Unit - Length belt - Electronic sanding beam EPS - Sanding belt speed infinitely adjustable - 3. Unit - Brush sanding head Aderlohn 650mm / Messing 650mm - Operating side, left - Electric height adjustment - Feed speed infinitely adjustable - Vacuum transport belt - Air speed main collector 5500 m³/h, 20 m/s - Consumption of compressed air 80 - 108 m³/h - Weight 4.000 kg - Standort, nicht am Lager - Switch cabinet built into the machine - Total connection power 91A / 48 kW - Voltage / HZ 400/50

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

Truck RENAULT Trafic 2.0 dCi 120, amtl. Kennz. B EK 630, EZ 01.12.2020, 85.627 abgel. Km, (17.03.2026), 1.997 cm³ Diesel, Euro 6, 88 kW, GV. 2.835 kg, VIN: VF1FL000X65914610, exterior color white, fabric upholstery gray, 6-speed manual transmission, multifunction steering wheel, steel rims, 1 key, ZB I available, ZB II? HU 06/27

Element sauna TEKA approx. 200x140x210h cm

Truck RENAULT Trafic 2.0 dCi 120, amtl. Kennz. B EK 322, EZ 165.20.2020, 97.616 abgel. Km, (15.10.2020), 1.997 cm³ Diesel, Euro 6, 88 kW, GVW. 2.835 kg, VIN: VF1FL000365914691, exterior color white, fabric upholstery gray, 6-speed manual transmission, multifunction steering wheel, steel rims, 1 key, ZB I available, ZB II ? HU 03/26

without pallets Auction-ID: A7-46300-50

Machine works and can be shipped at extra cost Auction-ID: A1-45666-102

Type: Metal shed Year of construction: 2026 Material: Steel Overall dimensions: Length (1): 12000 mm Length (2): 20000 mm Total area: 240 m² Gutter height: 4000 mm Ridge height: 5800 mm Additional information: Roof slope: 20° Color: Painted RAL 5023 Structure: - 2 beams (trusses) on the ends – IPE 160 profile - 3 intermediate beams (trusses) – IPE 200 profile - 4 end posts – IPE 160 profile - 6 intermediate posts – IPE 200 profile - 3 door posts – square pipe 100x100x4 - 4 pressure uprights – pipe 76x4 - Wind bracing for beams and posts – galvanized steel strips with 16 mm tensioners Assembly: Bolted construction (demountable) Documentation: - Certificate of Conformity for materials - Construction sketch - Foundation plan Condition: Unused Loading: Free loading Auction-ID: A7-46289-5

According to photos, weight estimated Stainless steel pipes need to be replaced, Auction-ID: A1-45666-23

According to photos, machine is no longer connected to the power and the liquids are emptied for transport. Documents are available electronically Auction-ID: A1-45666-4

According to photos Documents are available electronically Auction-ID: A1-45666-3

2 pcs of telescope conveyors only one Caljan has production plate. Collection date latest until 29.5.26. Auction-ID: A7-46443-1

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2007 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 83,311 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD 1355 GE – 355 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-5

LOT 1 Type: Industrial metal warehouse Material: Steel Year of construction: 2026 Overall size (1): L 15000 mm / 15000 mm Overall size (2): L 30000 mm Height of the post: 4500 mm Ridge height: 6500 mm Total area: 450 sq m Additional information: Roof slope: 20 degrees; Painted RAI 5023; The structure consists of: 2 beams (trusses) on the ends which are from the IPE 160 profile; 5 intermediate beams (trusses) from the IPE 220 profile, 4 end posts from the IPE 160 profile, 10 intermediate posts from the IPE 220 profile, 4 door posts from the square tube 100x100x4; 6 pressure struts from 76X4 pipe; wind strip for beams and posts made of galvanized steel with 16 mm tensioner; The entire structure is on bolts (removable); Condition: unused; The entire structure includes Certificate of Conformity for materials, construction sketch, foundation plan. Auction-ID: A7-4 ...

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2008 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 78,469 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-6

Vehicle data: Manufacturer: Combilift Type: C5000MK4/120/63TR Type: Four-way sideloader Drive type: Diesel Load capacity: 4400 kg Year of construction: 2024 Length: 2700 mm Overall width: 3100 mm Net weight: 6950 kg ISO class: ISO class 3 = 2,500 - 4,999 kg Mast data Mast Type: Triplex Lifting height: 6352 mm Overall height: 2967 mm Free Lift: 1996 mm Fork length: 1200 mm Fork width: 150 mm Fork thickness: 50 mm Fork carriage: 3100 mm Engine and Co. Drive: Kubota V2403TE Battery: 2024, 12V, 80 - 100% Description and equipment Front tyres: Superelastic Front tire size: 450x200 Front Tire Condition: 80 - 100% Rear tires: Superelastic Rear tire size: 720x295 Rear Tire Condition: 80 - 100% Tech. Condition: New Optical Condition: New Attachments: - Fork positioner Attachments: 3100 mm tine adjustment Special equipment: - 3rd valve - 4th valve - Re ...

Type: Steel fence panels Material: Corrugated sheet metal (0.8 mm thickness) Color: RAL 7016 Anthracite Grey Panel dimensions (W x H): 2,000 x 1,600 mm Quantity: 5 panels Surface protection: Protective foil applied Application: Perimeter fencing / property enclosure Condition: Unused Loading: Free loading included Auction-ID: A7-46289-31

KNOLL coolant system and chip conveyor, toolchanger positions: 160, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg Auction-ID: A7-46300-40

According to photos, spindle defective With turntable, tool changer available Auction-ID: A1-45666-24

Type: Steel fence panels Material: Corrugated sheet metal (0.8 mm thickness) Color: RAL 7023 Grey Panel dimensions (W x H): 2,000 x 1,600 mm Quantity: 12 panels Surface protection: Painted finish Application: Perimeter fencing / property enclosure Condition: Unused Loading: Free loading included Auction-ID: A7-46289-33