diesel man 20 used for sale

Gripper function Diameter 150-850mm tilt forward/back 0-90, Turn left right +90 / -90 Required battery 12 V 60 AH without charging rack without battery without charger Auction-ID: A1-45975-26

Keys, access cards, passwords Standard PIN: 12345# Auction-ID: A1-45975-22

Device is as good as new Blue Sport front and rear additional camera system on the fork Battery Lithium Ion technology with charger UVV 08/26 Auction-ID: A1-45975-6

Front lighting LED Lighting Rear: One LED One Blue Spot Battery defective - see picture UVV 12/25 Auction-ID: A1-45975-2

Max fork width 1.75 m Front lighting, spotlight and driving lights Rear spotlight and reversing lights as well as rear lights with brake light yellow signal light with windshield wipers front and rear Seat with seat heating Ventilation and heating Auction-ID: A1-45975-13

Gearbox defective Battery trough defective Battery defective Auction-ID: A1-45975-1

Platforms, maximum height 11.50 m, Maxim two people 215 kilos and 55 g kilos has material Auction-ID: A1-45975-27

Lithium Ion Technology Battery defective Auction-ID: A1-45975-33

Lithium Ion Technology Battery defective Auction-ID: A1-45975-31

Maximum tractive force: 8 t Without charger UVV 04/26 Auction-ID: A1-45975-8

Table saw SCHEPPACH HS-100S built in 2017, 2,000W, S/N 0159-51066, table size approx. 50 x 65 cm

Screw compressor RENNER RSDK-PRO 3.0 year 2021 10 bar, 410 ltr/min, 3 kW, compressed air dryer RENNER RKT+0035 type 1481A 16 bar year 2020/21, S/N 200030820, 90 l pressure vessel BWB 366 913 11 bar year 2020

Whiteboard approx. 200x120 cm, with drawing board table model

Auction-ID: A1-46274-12

Auction-ID: A1-46258-4

Car Trailer ANSSEMS HKB 2000, official Kennz. HBS-FS 40, EZ n. known, ZB I was available at the time of inventory n., permissible. GG 2,000 kg, FIN XLJ00000020002121, platform approx. 300x180 cm, railing all around, vehicle registration document + vehicle registration document is missing, HU 03/27, HU report is missing

Diameter 14mm, length 350m Auction-ID: A1-46274-39

Truck Flatbed FORD Transit 2.0 TDCi 350L, amtl. Kennz. HBS-FS 66, EZ. 22.06.2018, approx. 253,000 km (03.02.26 estimated statement of debtor), 1,995 cm³ diesel, 96 kW, Euro 6, Fg,-Nr. WF0EXXTTGEJS47877, single-family home, eAsp., multifunction steering wheel, 6-speed manual transmission, AHK 750/2800 kg, 3-seater, with toolbox, traces of use on the entire vehicle, partly dents and dents, vehicle not cleaned and cleared out, engine damage, engine partially disassembled, parts in the interior, vehicle registration document is available in the original, vehicle registration document is missing, HU 09/24, HU report missing

Type: Screw compressor Model: Kaeser SK 19 YOM: 2005 Rated power: 15 kW Air flow: 2260 l/min Max. pressure: 11 bar Working hours: 28,000 h Time left to maintenance: 2500 h Dimensions (D x W x H): 812 x 1117 x 914 mm Weight: 300 kg Condition: Regularly maintained Operating manual not available. Auction-ID: A7-45988-18

Diameter 14mm, length 380m Auction-ID: A1-46274-35

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-94

Battery-powered, conveniently transportable laser marking tool with safety cone to protect the marking area. Marking power 20W, working field 110 x 110 mm (variable based on the lens installed). Integrated Linux design computer with 7\" touch-screen and USB 2.0 interface for data transfer. Air cooling, 220 V power supply, 300W absorption, up to 3 hours of battery life. Machine condition: unchecked. Approx. Transport dimension: LxWxH 700 x 300 x 500 mm; Approx. Weight: 10kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-179

Diameter 9mm, length 235m Auction-ID: A1-46274-13

4 UNITS/SETS OF SDM0070 PACKED TOGETHER. A SINGLE SDM0070 CORRESPONDS TO: Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0070 PACKED TOGETHER: 370 x 680 x h70 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-48

Diameter 9mm, length 235m Auction-ID: A1-46274-9

Battery-powered, conveniently transportable laser marking tool with safety cone to protect the marking area. Marking power 20W, working field 110 x 110 mm (variable based on the lens installed). Integrated Linux design computer with 7\" touch-screen and USB 2.0 interface for data transfer. Air cooling, 220 V power supply, 300W absorption, up to 3 hours of battery life. Machine condition: unchecked. Approx. Transport dimension: LxWxH 700 x 300 x 500 mm; Approx. Weight: 10kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-18

Diameter 11mm, length 320m Auction-ID: A1-46274-24

Diameter 9mm, length 121m Auction-ID: A1-46274-11

3 UNITS/SETS OF ATT0037 PACKED TOGETHER. A SINGLE ATT0037 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0037 PACKED TOGETHER: 550 x 1050 x h110 mm - 210 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-115

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-284

Diameter 10mm, length 286m Auction-ID: A1-46274-18

Rated power: 15 kW Air flow: 2500 l/min Max. pressure: 11 bar Time left to maintenance: 3000 h Working hours: 8076 h Dim. (LxWxH): 780 x 1480 x 1255 mm Weight: 487 kg Auction-ID: A7-45988-15

5 UNITS/SETS OF ATT0015 PACKED TOGETHER. A SINGLE ATT0015 CORRESPONDS TO: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 320 x 120 x 120 mm; Approx. Weight: 12kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0015 PACKED TOGETHER: 320 x 600 x h120 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-105

Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-197

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-215

Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 280 x 280 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-174

Auction-ID: A1-46258-6

LAMBORGHINI URUS – Black Edition SUV General data: Mileage: 68650 km Engine: Petrol Engine capacity: 3996 cm³ Power: 478 kW (650 HP) Weight: 2272 kg Seats: 5 Interior & comfort: Black Nappa leather with yellow stitching Electric seats with memory, heating, cooling, massage Q-Citura upholstery, leather/Alcantara dashboard Heated steering wheel, ambient lighting 4-zone climate control, panoramic roof Equipment: 23\" black wheels, adaptive air suspension All-wheel steering, driving modes (Corsa, Sport, etc.) Head-up display, navigation, keyless entry Bang & Olufsen 3D sound system Safety: 360° camera, parking assist Night vision, lane assist, blind spot monitor Adaptive cruise control, full LED matrix lights Description: High-performance luxury SUV combining 650 HP with premium comfort and advanced technology. Suitable for both dynamic driving an ...

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-57

Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 280 x 280 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-162

The laser marking system is equipped with a safety housing, using high quality components, ideal for marking, engraving and cutting metal products. It has a motorised vertical axis that is easy to use. At work, the fully enclosed fibre laser marking machine will lock the fumes and dust generated by machining inside. Capable of working on a wide range of metals: carbon steel, mild steel, stainless steel, aluminium, copper, magnesium, zinc; on rare metals and alloys such as gold, silver, titanium; and on metal surfaces with special treatments such as anodised aluminium, plated surfaces. It can also mark non-metallic surfaces, for example: plastics such as ABS, PVC, HDPE, PP, PC, PE, rubber and resins. Useful for permanently marking logos, barcodes, QR codes, serial numbers. Occupies a small space and is suitable for marking small objects. Laser power 20W, 220V, laser wavelength 1064 nm, m ...

Diameter 12mm, length 249m Auction-ID: A1-46274-33

5 UNITS/SETS OF ATT0035 PACKED TOGETHER. A SINGLE ATT0035 CORRESPONDS TO: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminium. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. Machine condition: unchecked. Approx. Transport dimension: LxWxH 330 x 210 x 50 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0035 PACKED TOGETHER: 330 x 1050 x h50 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-153

Battery-powered, conveniently transportable laser marking tool with safety cone to protect the marking area. Marking power 20W, working field 110 x 110 mm (variable based on the lens installed). Integrated Linux design computer with 7\" touch-screen and USB 2.0 interface for data transfer. Air cooling, 220 V power supply, 300W absorption, up to 3 hours of battery life. Machine condition: unchecked. Approx. Transport dimension: LxWxH 700 x 300 x 500 mm; Approx. Weight: 10kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-312

Auction-ID: A1-46258-2

Battery-powered, conveniently transportable laser marking tool with safety cone to protect the marking area. Marking power 20W, working field 110 x 110 mm (variable based on the lens installed). Integrated Linux design computer with 7\" touch-screen and USB 2.0 interface for data transfer. Air cooling, 220 V power supply, 300W absorption, up to 3 hours of battery life. Machine condition: unchecked. Approx. Transport dimension: LxWxH 700 x 300 x 500 mm; Approx. Weight: 10kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-225

Diameter 10mm, length 250m Auction-ID: A1-46274-20

4 UNITS/SETS OF SDM0052 PACKED TOGETHER. A SINGLE SDM0052 CORRESPONDS TO: Professional outside micrometer with range of application 75-100mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 150 x 35 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0052 PACKED TOGETHER: 260 x 600 x h35 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction- ...

2 UNITS/SETS OF LMM0003 PACKED TOGETHER. A SINGLE LMM0003 CORRESPONDS TO: The laser marking system is equipped with a safety housing, using high quality components, ideal for marking, engraving and cutting metal products. It has a motorised vertical axis that is easy to use. At work, the fully enclosed fibre laser marking machine will lock the fumes and dust generated by machining inside. Capable of working on a wide range of metals: carbon steel, mild steel, stainless steel, aluminium, copper, magnesium, zinc; on rare metals and alloys such as gold, silver, titanium; and on metal surfaces with special treatments such as anodised aluminium, plated surfaces. It can also mark non-metallic surfaces, for example: plastics such as ABS, PVC, HDPE, PP, PC, PE, rubber and resins. Useful for permanently marking logos, barcodes, QR codes, serial numbers. Occupies a small space and is suitable for ...

Diameter 9mm, length 121m Auction-ID: A1-46274-10