diesel man 20 used for sale

Pneumatic stapler BEA built in 2022, max. 6 bar

Material trolley FETRA 2400 built in 2021, load capacity approx. 500 kg, approx. 50x100 cm, 2 levels, without contents

Mobile extraction METABO SPA 2002 D, 565 m³/h, 1.50 kW, net weight approx. 116 kg, S/N 11435314605

Chip extraction FELDER RL 160 built in 2014, 3.0 kW 400 V, max. 3,200 m³/h, dead weight approx. 290 kg, S/N 310500814

Long pallet truck QTEC OSE 2500 built in 2016, load capacity 2,000 kg, tine length approx. 2,500 mm, tine width approx. 150 mm, tine spacing approx. 235 mm, S/N V16000123

Cordless impact wrench MAKITA DDF 482 year 2018, S/N 177152R, 1 battery 18V/4.0 Ah

One-hand milling machine MAKITA 3708 FC built in 2013, 500 W

Carpenter's workbench approx. 200b cm, base shelf, small parts holder on the wall

Hand router BOSCH POF 1400 ACE year 2016

Drill MAKITA 6413 built in 2021, max. 10 mm

Cordless screwdriver WÜRTH BS 10-A built in 2016, 1 battery 10.8V/2.0 Ah

Orbital Sander FESTOOL ETS 150/3 EQ 2015, max. 150 mm, S/N 40160528

Mobile circular saw MAFELL Erika 60 E built in 2011, 1,300 W, S/N 0988734

Cordless Screwdriver MAKITA DF330D 2018, S/N 2924725, 2x Battery 10.8V 1.3 Ah, 1x 12 V 2.0 Ah, Charger

Orbital Sander FESTOOL RS 300 Q Year 2013, S/N 40020778

Sliding table saw ALTENDORF F45 EvoDrive year 2023, blade max. 450 mm, 7,208 kVA 400 V, S/N 230112016, digital display, control ALTENDORF, double mitre gauge Altendorf Duplex

Wooden work table approx. 200x84hx50t cm, with pin board

A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-16

In order to submit a bid on this lot, a deposit of €1300.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-9

A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18

A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Rotary table diameter 700 mm 24-position tool changer Cutting speed 15000 mm/min Fast feed speed 30000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-8

Floor Pull Saw MAFELL Erika 85 Ec Year 2015, S/N 1114276

Double bench grinder REMA DS04/150 built in 2013, S/N 131024008, 160x25x51 mm, 400 V

Temperature control unit GWK TECO CS 90 Bj. 2002, S/N 12166

Temperature control unit GWK TECO CS 140 year 2008, S/N 20314, internal No. 50

Temperature control unit GWK TECO CS 140 year 2008, S/N 15721, internal No. 35

Temperature control unit GWK TECO CS 140 year 2005, S/N 14526, internal No. 30

Granulate Dryer SIMAR KTF120-300 2007, 400V 50Hz, 7.5 kW, internal 49, PIOVAN S35 1997, S/N 3AL 6748

Temperature control unit GWK Teco CS 90 built in 2003, S/N 13248, internal No. 12

Temperature control unit GWK Teco CS 140 E year 2018, S/N S10017130, internal No. 8

Temperature control unit GWK Teco CS 90 E year 2017, S/N S10009675, 9.5 kW, internal 99

Pneumatic punch UNIMATIC punching device built in 2011, S/N 93010, pneumatic, on rolling block

Granulate funnel stainless steel MORETTO CS1 year 2010, S/N OP-01413273, weight 28.5 kg, 8 pieces

Temperature control unit GWK TECO CS 160 built in 2006, S/N 16035, internal No. 27

Temperature Control Unit GWK TECO CS 140T Year 2012, S/N 261087-02-02, Internal No. 83

Triangle Grinder BOSCH PMF220 CE Year 2017, Case

Impact Drill BOSCH GSB 20-2 RCE Year 2003, S/N 390010543, Case

Temperature control unit GWK TECO CS 90 built in 2003, 9.5 kW, internal No. 26

Tool Cleaning Device GWK Moldclean Year 2015, S/N 284051-02-01, internal 440010, compressed air operation

Scrubbing machine ULSONI Topclean 1600 built in 2024, 79 kg, S/N 442224060094, 230V 50Hz

Chiller TAE Evo M03 2011, S/N 2200190433, Refrigerant R134A

Control dispenser for card handling KAS 354/2006-11, 400VAC 50Hz, touch panel SIEMENS Simatic, control cable, pallet

PLC Card Withdrawal Handling KST System No. 418/2006-12, PLC control incomplete, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 037/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 009/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 035/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

Vacuum pump for ENGEL Duo 7050/1000 built in 2004

Electric forklift YALE ERP15VT SWB year 2017 Load capacity 1,250 kg Load height 5,500 mm, 26,296 m/h, 9,959 Bh (14.04.26), S/N G807B09518R, 10 kW, Weight without battery 2,550 kg, Battery 670 - 740 kg

Machine type: CNC Punching Machine / Nibbling Machine Manufacturer: TRUMPF Model: TRUMATIC 500 (Type 9089) Year of manufacture: 2000 Punching force: 220 kN Working area (X x Y): approx. 2500 x 1250 mm Max. sheet thickness: approx. 6–8 mm Max. punching diameter: 76.2 mm Stroke rate: up to approx. 900 strokes/min Tool stations: 18 positions with rotation Control: Bosch control (TRUMAGRAPH CC 220) Drive system: Electro-hydraulic punching head Positioning system: CNC-controlled X/Y axes Power supply: 400 V / 50 Hz Connected load: 19 kVA Control voltage: 24 V DC Fuse protection: 3 x 35 A Compressed air connection: 6 bar Machine number: 041617 Remarks: CNC sheet metal punching machine for high-speed processing, forming and nibbling operations; equipped with rotating tool system for flexible production Approx. own mass: 11050 kg Approx. dimensio ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units ...