diesel generator used for sale

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-46416-765

General information Type: GDA2500IS Year of construction: 2026 Fuel: Petrol Weight: 22 kg Outputs 1x 230V AC 1x 12V DC (8A) USB Outputs: 5V (1.0A / 2.1A) Technical specifications Frequency: 50 Hz Continuous power (Running watts): 2000 W Maximum power: 2200 W AC Current: 8.7 A Maximum altitude: 1000 m Performance class: G1 Quality class: A Max. ambient temperature: 40°C Power factor: 1.0 Phase: Single phase Auction-ID: A1-46416-32

OHV 4-stroke air-cooled engine. Never used. Auction-ID: A1-41996-105

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-46416-762

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46416-5

Equipped with: power: 50 kVA / 40 kW, voltage: 230/400 V, frequency: 50 Hz, current: 72.2 A, engine model: N4105ZD, engine speed: 1500 rpm, phase: 3-phase, weight: 760 kg – 820 kg, dimensions: ~2030–2200 mm (L) x 800–900 mm, (W) x 1130–1200 mm (H), soundproofing housing (silent), fuel: Diesel, with manuals and spare keys, (automatic voltage regulator) and electric start. Auction-ID: A1-40138-189

Featured; John Deere engine; 6-cylinder diesel; Please note; Doesn't start Forklift available on site Auction-ID: A1-40138-226

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46416-91

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-46416-89

General information Type: GDA2500IS Year of construction: 2026 Fuel: Petrol Weight: 22 kg Outputs 1x 230V AC 1x 12V DC (8A) USB Outputs: 5V (1.0A / 2.1A) Technical specifications Frequency: 50 Hz Continuous power (Running watts): 2000 W Maximum power: 2200 W AC Current: 8.7 A Maximum altitude: 1000 m Performance class: G1 Quality class: A Max. ambient temperature: 40°C Power factor: 1.0 Phase: Single phase Auction-ID: A1-46416-31

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-46416-85

Wärtsilä 18V34SG Complete Natural gas Power Plant for sale. Hours 46,063 (Service done at 42,658 hrs in sept 2017) Year 2007 Fuel Natural gas Capacity 6 MW Voltage 6000V Frequency: 50 Hz Scope of supply: Complete 6 MW plant with Wärtsilä 18V34SG Genset including Engine, ABB alternator model AMG0900LP08DSE, skid, gas train, 2 radiators, 1 cooling tower with its own electrical panel powered by the service panel, 1 complete service panel with UTIF metering group, power line with IN 250A OUT 50kA, 1 chimney, Wärtsilä electrical panels, HMI control panel, synchronizers, and WECS control Panel. The disassemblable soundproof structure can be made available with a separate assessment.

Key data: 250 KW, 300 kVA, 400 V

MTU Diesel Emergency Power Generator - Like New, Only Test Hours. Manufacturer: MTU / Rolls Royce / Marelli Generators Type: 6R1600 G40F Power: 250kW Diesel 50Hz 400V Hours: 115 hrs Includes control panel, exhaust system, and logbook history

For Sale – Jenbacher JGS 320 gas Natural Containerized Gas Generator Set Model: Jenbacher JGS 320 Configuration: Containerized unit Year: 2013 Operating Hours: 65,000 h Major Maintenance: Last major maintenance performed at 34,000 operating hours Maintenance History: Regularly maintained under supplier preventive and corrective maintenance contract Heat Recovery: Includes 451 kWt steam-generating heat exchanger Output Voltage: 400 V Transformer: Not included Control System: dia.Ne XT3 supervisor version

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation

"The Plasmatreat FG 5001 plasma generator is an industrial piece of equipment designed for surface treatment applications by Openair-Plasma technology. Robust and efficient, it improves the adhesion, cleaning and activation of materials in many industrial processes. This model, offered as is, is a reliable solution for demanding production environments or recommissioning projects. Compact with dimensions of 60 cm long, 80 cm wide and 35 cm high, it can be easily integrated into an existing production line. Its weight of 55 kg is a testament to its solid construction, suitable for intensive industrial use. Designed by the Plasmatreat brand, recognized for its expertise in plasma technologies, the FG 5001 offers an efficient basis for surface treatment operations requiring precision and consistency."