133,956 used machines on RESALE, but how to find them? Machine Search
Equipped with: Deutz engine block from a Fendt 410 Auction-ID: A1-40137-103
In case Auction-ID: A1-46547-102
used
Key data: 1350 KW
Power 1800 HP Engine type V type V12 Speed 2300 RPM Bore 128 mm
System designation D8-IPS700 Configuration in-line 6 Crankshaft power, kW (hp) 405 (550) 2900 rpm Propshaft power, kW (hp) 384 (523) 2900 rpm Aspiration Twin entry turbo and compressor
System designation D8-IPS800 Configuration in-line 6 Crankshaft power, kW (hp) 441 (600) 3000 rpm Propshaft power, kW (hp) 419 (570) 3000 rpm
Product designation D6-IPS650 Crankshaft power Kw/Hp 353 /480 Propshaft power, kW /Hp 339 /461 Engine speed, rpm 3700
Max power 350 hp 3800 rpm Max torque 700 Nm Number of cylinder 6
A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Conditi ...
Paxman - 12RPHCZ MK 7 Turbocharger Holset Model 6 Completely overhauled Unit price! 2 pieces available !
Commonrail pump As good as new with 400 hours
Number of working hours: 2462 h weight max.: 8,5 t weight: 12,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1185 KW, 1000 1/min
BECAUSE OF NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 SHIP ENGINE REMOVED IN ROTATING CONDITION
Number of working hours: 2633 h weight max.: 8 t weight of the machine ca.: 13280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1276 KW, 900 1/min
FOR SALE... COMPLETE 1 ENGINE SULZER 8 S 20 AT TURKEY TO WHOM IT MAY CONCERN; WE'VE 1 PC COMPLETE 1 PC ENGINE SULZER 8 S 20 EX GENSET ENGINE AT OUR STOCK PLS FIND ENGINE DTLS AT BELOW TYPE 8 S 20 REV 900RPM ENGINE SHAFT OUTPUT 1276kW YOB 1997 ENGINE HAS STD CRANK SHAFT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST REGARD; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY
weight max. in kg: 8 t Number of working hours: 2633 h height of stroke: 3750 mm weight of the machine ca.: 11600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece
We currently offer: New Perkins 4 Cylinder Engines Type: 404A-22G1 2.2 liters RPM 1500 Power: 20.3 KVA You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Key data: 1185 KW, 1000 1/min
DUE TO NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 RIGHT-TURNING SHIP ENGINE REMOVED IN THE ROTATING STATE
Key data: 3300 KW
We have 28 unit diesel main engine MTU with their gear boxes. For more information, do not hestitate to contact with us. Engines 1981 model but some of them revised 2010 by MTU.
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l
Key data: 1566 KW, 1600 1/min
Surplus Caterpillar 3516C, 2100 BHP, 1600 RPM, Marine Propulsion Diesel Engine Surplus/Never Used/Never Installed Caterpillar 3516C Marine Propulsion Diesel Engine One (1) Surplus, Never Used, Never Installed, Caterpillar 3516C, 2100 BHP, 1600 RPM, Marine Tier II, Diesel Engine, Keel Cooled, Duplex Fuel Filter, 24v. Starter, Electric Starter Harness Assembly, 24v. Charging Alternator, Air Cleaner and Instrument Panel. APPLICATION: Marine Propulsion.
Key data: 600 KW
MTU Diesel Engine Marine Engines Model: 12V 2000 M61 Year of manufacture: 2011 Condition: New Qty: 6 Power: 600 kW Speed: 1800 RPM Mass: 2900 kg
Key data: 635 KW
New Mitsubishi Marine Engines. Mitsubishi S6R MPTAW-4 , 635Kw1800rpm auxilairy [ 2022 ] un used. Mitsubishi S6R Z3 MPTAW-4 , 635Kw1800rpm auxilairy [ 2019 ] un used. Mitsubishi S16R-2 T2 MPTAW-3 , 1450Kw1350rpm propulsion [ 2018 ] unused. All engines have only type approval All engines are unused and stored properly as required by the manufacturer. Manuals and the primary filter set are present. S6R Engines have a Woodard Pro Act and a 2301E control box. S16R-2 is provided with a Woodward PSG governor.
FOR SALE PIELSTICK 12PA1854 900 KVA FUEL
Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!
Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!
Key data: 1320 KW, 1800 1/min
Due to new engines, this MTU type 12V4000 M60 and the Reintjes gearbox type WAF 763L with a rating of 5,750: 1 half May 2026 is available. The shooting hours is dan Umnabei 64.000 Cylinder head overhauled at 30,000 hours of filming
Key data: 1081 KW, 2300 1/min
Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 28,330
Key data: 1081 KW, 2300 1/min
Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 18,701
Key data: 1140 KW, 2250 1/min
Used MTU 16V2000 M72 – Port Side – Available Now Well-maintained MTU 16V2000 M72 marine engine from 2013 and strong remaining lifetime. A reliable high‑performance choice for shipowners, operators, and shipyards seeking a proven propulsion solution. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 111 995 Configuration: Port Side Year of Manufacture: 2013 Power Output: 1440 kW Rated Speed: 2250 rpm Weight: 3550 kg Operating Hours & Service Status Total operating hours: 31,427 h (as of 12/2023) QL4 major service completed: 09/2022 at 26,537 h Remaining hours before QL3 service: approx. 1,100 h TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is dry, complete, and in good technical condition. It has been operated in a professional environment with continuous maintenance and is ready for inspection and quick delivery. Key Advanta ...
Key data: 1140 KW, 2250 1/min
Used MTU 16V2000 M72 – Starboard Side – Available Now Reliable and well‑maintained MTU 16V2000 M72 marine engine recent QL3 overhaul with minimal operating hours since. A strong option for shipowners, operators, or shipyards looking for a robust and ready‑to‑install propulsion engine. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 110 996 Configuration: Starboard Side Year of Manufacture: 2013 (visible on nameplate) Weight: 3560 kg Operating Hours & Service Status Total operating hours: 28,597 h (as of 12/2023) QL4 major service completed: 03/2022 QL3 overhaul completed: 10/2023 Running hours since QL3: Very few TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is complete, dry, and in excellent technical condition due to the recent QL3 overhaul and minimal runtime afterward. Ready for inspection and immediate delivery. Ke ...
maximum number of results exceeded
please refine your search
10 € 
