diesel generator 28 used for sale

Drive chain, duplex chain, roller chain -Size: 28B-2 1 3/4 inches -Width: 125 mm -Length: 0.9 m -Price: per meter -Number: 3x chains available -Weight: 15 kg

Centrifugal pump, water pump -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 0,37 kW condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 350 Roll width in mm: 280 Roll division in mm: 110 Driven: YES, NO scope of delivery: without supports and side guides For individual, expert advi ...

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Manufacturer: Fischer Rückle, Type: FLA FDQ 2850 FCA, Year: 1993, Working width mm: 2850, Veneer thickness min mm: 0,4 , Veneer thickness max. min: 2, Feeding speed max m/min: 24, Year :1993

Machine name: Spiral conveyor Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Year of Make: 2008 Speed: 28 rpm Trough width: 280 mm Conveyor length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: sewage sludge or similar sludge Drive motor: 3 kW Flow rate: 3 kW Dimensions: L 6,600 x W 400 x H 1,600 mm Curb weight: 800 kg Tech. Documentation: Yes Remark: Trough made of stainless steel and spiral made of normal steel, inclination angle 22°, flow rate sewage sludge 1.5 - 2.0 m3 /h Blobyberpmgfe Etu Ref Accessories: Swivel ring (swivel) Condition: Used Price: On request

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 185/135/H180 mm -Weight: 5 kg

Clamping plate with T-slots Plate field Welding table Welding table Plate boring machine -Width: 795 mm -Length: 2800 mm -Height: mm -Plate thickness: 35 mm -Working height: 960 mm -Plate with: support ribs -Groove width: 22 mm -Dimensions: 860/2870/H960 mm -Weight: 1470 kg

Description Equipped with Robot S200

Transmitter -Manufacturer: Endress Hauser -Type: FTC 282 -Number: 2x devices available -Price: per piece -Dimensions: 60/170/H135 mm -Weight: 1.1 kg

Machine Type: Electrode Inverter Welding Rectifier without bi-power device Make Merkle Type MobiARC 284 cel Appendix No. 103.101 Connection voltage 3 x 400 volts Adjustment range 20 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter through built-in fan Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 9 years Connection for hand and foot remote control Condition workshop tested, very good, incl. UVV test protocol Scope of supply welding system with the following accessories: 1 piece of electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 pcs rod electrodes ...

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm -Depth: 120 mm -Drain: Ø 52 mm -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Key data: 280 mm, 3800 mm

Used machine Metora VMB 280 including chip conveyor. Machine works in manual as well as semi-automatic mode. automatic feed is not functional. Year of construction not apparent Machine in preparation, photos to follow.

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg

Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg

Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Refrigerant compressors system Bitzer -Type: 6H-25.2Y-40P (x7), 6HE-28Y-40P (x1) -Volume: 110.5 m3/h (x7), 111 m3/h (x1) -Cooling capacity for R404A: 605 kW at -5°C/40°C, 500.8 kW at -10°C/40°C, 260 kW at -25°C/40°C -Dimensions: 5100 x 800 x 1850 mm -Items in magazine: 1 -Reference number: Z 101 -Condition: Used in good condition

Slack adjuster, manual adjuster, slack adjuster, brake slack adjuster, brake adjuster -Slack adjuster: for brake system -Type: BXL 281966 -Toothing: 10 teeth Ø 38/31 mm -Number: 2 available -Price per piece -Dimensions: 215/100/H70 mm -Weight: 3.2 kg/pcs

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand, height adjustable -Design: solid steel construction -Dimensions: 355/280H500 mm -Weight: 19 kg

V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm -Weight: 14.4 kg

Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2880 Nominal / outside width in mm: 510 Belt width in mm: 400 Driven: YES Engine type: Trommelmotor KW: 0,55/S1 Conveyor speed m / s: freely adj ...

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, Digital Caliper -Item No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm Quantity: 1 piece available -Case dimensions: 465/180/H30 mm -Weight: 1.0 kg

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg

clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm -Guide rail: with rack -Dimensions: see photos / technical drawing -Dimensions: 3300/285/H185 mm -Weight: 397 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

cutting diameter: 280 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: 1 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 320 mm -Type: B2-63/28x320 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm / retracted distance 595 mm -Dimensions: 695/87/H145 mm -Weight: 14.3 kg

max. wheel diameter: 280 mm gear width: 330 mm max. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 3 MK table:: 500 x 350 mm column diameter: 105 mm turning speeds: 75 - 3010 U/min total power requirement: 0,9 / 1,2 kW weight of the machine ca.: 235 kg. range L-W-H: 1740 x 670 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 63 mm -Type: B1-63/28x63/0 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm -Dimensions: 330/88/H95 mm -Weight: 7.0 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 485 kg dimensions of the machine ca.: 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can b ...

cutting diameter: 250 mm saw band length: 2950 x 27 x 0,9 mm table height: ca. 800 mm band speed: 36/72 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (C ...

Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 2950x27x0,9 mm table height: mm band speed: 36/72 m/min total power requirement: 1,8 kW weight of the machine ca.: 440 kg dimensions of the machine ca.: m Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Dimensions: 430/400/H360 mm -Weight: 99 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Price/Sale: complete -Dimensions: 430/400/H360 mm -Weight: 99 kg

Description: Suitable for cleaning coolant and oil-based grinding mist., flow: 900 m³/h, Filter levels: 2, Connection piece – diameter: 150 mm, Sound pressure level: 60 dB, Connected load approx.: 00 V / 50 Hz / 0.9 kW, Dimensions W x D x H approx.: 1182 x 574 x 560 mm, Weight approx: about 130 kg, colour: Grey RAL 9002

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg

x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 11 total power requirement: 7,5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 3,5 x 2,5 m No. 4430 Universal tool milling machine Working area: 710 x 600 x 455 mm Drive: 7.5 Control: Dialog-11 control Spindle holder SK 40 Speed range up to 6,300 Fixed table Cabin Coolant container Space requirement see data sheet Weight approx. 5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.