diesel generator 28 used for sale

Fan, fan, electric motor, blower, fan, fan, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan -Power: 1.5 kW -Speed: 2860 rpm -Voltage: 220/400V -Fan diameter: 515 mm -Quantity: 1x fan available -Price per piece -Dimensions: 515/515/H315 mm -Weight: 22.5kg

Fan, fan, blower -Voltage: 380 V -Power: 0.72/0.28 kW -Speed: 1370/870 rpm -Fan: Ø 280 mm -Height: 160 mm -Weight: 10.3 kg

Working width: 2800 mm Roller width: 3000 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - ebonit: 100 Grad shore Pressure line: 15 N / mm Pressure total: 16 to Cloth guiding system for woven fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: Links-Mitte-Rechts total power requirement: 12 kW weight: 4000 kg range L-W-H: 3,6 x 2,2 x 2,8 mm • new control system from Küsters - delivered in 2008, • with quick cleaning, • without being overhauled, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg

Three-phase motor, electric motor -Power: 2.5 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B35 -Protection class: IP 54 -Dimensions: 395/250/H270 mm -Weight: 30 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 150 x 60 mm -Clamping depth: max. 285 mm -centric clamping -Dimensions: 620/275/H135 mm -Weight: 41 kg

Key data: 220 mm

MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 185/131/H175 mm -Weight: 6 kg

Drive chain, duplex chain, roller chain -Size: 28B-2 1 3/4 inches -Width: 125 mm -Length: 0.9 m -Price: per meter -Number: 3x chains available -Weight: 15 kg

Centrifugal pump, water pump -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...

2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citoborma 280b Year 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 185/135/H180 mm -Weight: 5 kg

2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280B Baujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Clamping plate with T-slots Plate field Welding table Welding table Plate boring machine -Width: 795 mm -Length: 2800 mm -Height: mm -Plate thickness: 35 mm -Working height: 960 mm -Plate with: support ribs -Groove width: 22 mm -Dimensions: 860/2870/H960 mm -Weight: 1470 kg

Transmitter -Manufacturer: Endress Hauser -Type: FTC 282 -Number: 2x devices available -Price: per piece -Dimensions: 60/170/H135 mm -Weight: 1.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm -Depth: 120 mm -Drain: Ø 52 mm -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg

Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg

Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Slack adjuster, manual adjuster, slack adjuster, brake slack adjuster, brake adjuster -Slack adjuster: for brake system -Type: BXL 281966 -Toothing: 10 teeth Ø 38/31 mm -Number: 2 available -Price per piece -Dimensions: 215/100/H70 mm -Weight: 3.2 kg/pcs

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand, height adjustable -Design: solid steel construction -Dimensions: 355/280H500 mm -Weight: 19 kg

V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm -Weight: 14.4 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm -Guide rail: with rack -Dimensions: see photos / technical drawing -Dimensions: 3300/285/H185 mm -Weight: 397 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

Engine Brand: FORD, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 631 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 175 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/ford-2802-e-v8-pumpset-550m3h-used/ 17880, , = More information =, , Height: 170 cm, Type number: 2802 E V8 POMPSET 550M3/H

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 320 mm -Type: B2-63/28x320 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm / retracted distance 595 mm -Dimensions: 695/87/H145 mm -Weight: 14.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 63 mm -Type: B1-63/28x63/0 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm -Dimensions: 330/88/H95 mm -Weight: 7.0 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Dimensions: 430/400/H360 mm -Weight: 99 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Price/Sale: complete -Dimensions: 430/400/H360 mm -Weight: 99 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Geared motor, electric motor, three-phase motor -Speed: 29/117 rpm -Power: 0.06/0.25 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 20 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg

geared motor, electric motor -Speed: 88 rpm -Power: 2.2 kW -Design: B5 -Recess: Ø130 mm -Bolt circle: Ø 165 mm -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

three-phase motor, electric motor -Condition: unused -Engine data: -Power: 75 kW -Speed: 2970 rpm -Voltage: 380-420 V (delta-star) -Protection class: IP54 -Type: B3-B5 -Shaft: Ø 65 mm -further data see photo type plate -Dimensions: 1030/770/H600 mm -Weight: 610 kg

Screw pump, GR70-SMT16B-600L-AC-28B5G, Settima, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Please note: The unit was in use in a Frech die-casting machine for just 3 months and was installed for 1 year and is in an top condition. - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 2.100 excl. VAT. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe Please note: We also sell the complete oil/water cooling system. If you are interested, please request the operating instructions or we would be happy t ...