136,861 used machines on RESALE, but how to find them? Machine Search
Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308
Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cove ...
Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs
Transnorm conveyor belt GF 1000-600-500 RA2423 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...
Transnorm belt curve conveyor left 90°-1000-800-IR900 RA2001 Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor Stand width (NB): 1000 mm Belt width (GuB): 800 mm Motor width (MB): +200 mm overall height (BH): 210 mm inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed: Please contact Drive: SEW gear motor with Movi-Mot Electrical data: 50Hz V230/400, kW 0,37 /S1 Year of construction: 1992 Included: Side guide on both sides and frame Optionally available: Suppo ...
Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch Features: Construction year: 2016 scope of delivery: including supports and side guides, Lichtschranken, Notausknopf angle: 30° Antrieb: SEW Getriebemotor mit MOVIMOT condition: Ausstellungsstück Belt width in mm (GuB): 1000 Electric data: 380-400 Frame width in mm (NB) ...
A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.
For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...
Key data: 100 t, 215 mm, 3100 mm
Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional
Height=1.35 m, Overall length= 1.55 m, Overall width= 3 m, Net weight= 685 kg,
Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,
Height=1.67 m, Overall length= 0.95 m, Overall width= 1.66 m, Net weight= 240 kg,
max. wheel diameter: 1250 mm gear width: 430 mm max. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 ° Stößelhublänge: 25 - 450 mm stroke position adjustment: 310 mm Doppelhubzahl - stufenlos: 70 - 190 U/min grinding wheel diam. min/max.: 290 - 400 mm table diameter: 1000 mm table load: 4000 kp dimensions of the machine ca.: 7,7 x 4,5 x 3,3 m total power requirement: 30 kW weight of the machine ca.: 28 t - Complete covering - Oil mist extraction - Coolant system - counter Holder - change Gears - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.36 m, Overall length= 1.65 m, Overall width= 3 m, Net weight= 300 kg,
turning length: 1000 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 250 mm spindle taper: DIN 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1220 kg range L-W-H: 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Sh ...
weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area L-W-H: 1000 x 900 x 900 mm range L-W-H: 1300 x 1750 x 2200 mm weight: 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...
turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake ...
turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake functi ...
turning length: 1000 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30-550 / 550-3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 5.5 kW weight of the machine ca.: 1145 kg. range L-W-H: 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED ...
Little-used guillotine shears, only occasionally 1.5 mm sheet thickness Stroke rate 56/ min. Power (Rm 400/mm) 3.5mm Rated power 4.0 kVA Weight 860 kg
MAchine is in good working condition.
sheet width: 1020 mm plate thickness: 1,5 mm daylight opening: max. 85 mm weight of the machine ca.: 240 kg dimensions of the machine ca.: m Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)! The data for this ad was created with ModulMWS - the s ...
GRONINGER FILLING MACHINE, MODEL DFVN 1000 (LF) Small filling and stoppering machine for disposable PFS and cartridges in nests. Usable for testing sizes and small batches, offers processes identical to those of a high-output system. Supports manual nest handling under laminar flow. Built in 2007. - Available with 1 ml format - Only 50 operating hours - Clear separation between the manual handling section and the fully automatic production section. - Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination - Dimensions: 1,500 ｘ 1,135 ｘ 2,000 mm PRODUCTIVITY - Max. Output: 4.800/hr - Filling volume: 0.5 - 50 ml - Supported package: 20/30/42/64/100/160 nest
Measuring machine Wenzel Smart CMM 1000 Year of construction 2010 Travel: X axis: 1000 mm, Y axis: 450 mm, Z axis: 400 mm Good condition
Approx. 4000 pieces of IBC standard containers used. Capacity 1000 litres Year of construction 2024 Pre-use for groceries. Emptied, but not washed. Substructure, plastic pallet. Location: near Magdeburg
honing diameter: 45 mm stroke: 1000 mm throat: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1000 mm grinding length: 8000 mm swing diameter: 1200 mm centre height: 600 mm max. workpiece weight between centres: 10000 kg workpiece weight max.: 20000 kg workpiece turning speeds: 5 - 60 U/min grinding slide speed stepless: 22 - 2240 mm/min rapid travel - grinding head longitudinal: 3500 mm/min turning speed range - grinding spindle: 450 - 1610 U/min grinding wheel size: 425 /710 x 63 x 305 mm tailstock adjustment: max. 6000 mm workpiece-drive: 20 kW grinding motor: 30 kW crowning with reference to bobbin radius: 0,01 - 1,5 mm total power requirement: 85 kW weight of the machine ca.: 35,4 t dimensions of the machine ca.: 13,1 x 3,3 x 2,35 m Roller grinding machine with movable grinding spindle carriage - Hollow and crown grinding device - Telescopic covers - Coolant system - Position tolerance 0.005 The data for this ad was created with ModulMWS - the software s ...
gebr. Milling machine, Fabr. Maho 1000 S x-travel: 1000 mm Y-travel: 600 mm z-travel: 800 mm Kne Uretrnrpehyxkjb Spindle holder ISO: 50 Control is the Philips 432 with pallet changer, in working condition, recently overhauled rotary table
Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) angle: 90° nominal voltage: 400 Conveying length in mm: 700 Nominal / outside width in mm: 760 Roll width in mm: 690 Roll division in mm: 75 Driven: YES Engine type: SEW Getriebemotor scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. S ...
turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC turning diameter over slide: 880 mm turning diameter over bed: 1220 mm tail stock: M80 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm spindle turning speed - stepless: 0 - 1000 U/min spindle motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m complete retrofit in 2020 - CNC Control Fagor 8055 TC - Tool holder turret:SAUTER model 0.5.320.025, vertical axis - Chip Conveyor - 4-jaw chuck Ø1000 mm - 3-jaw chuck Ø500 mm - Steady Ø500 mm - Movable bezel Ø250 mm - Special bar for machining very long interiors - Coolant RETROFITTING IN 2020 • Grinding of carriage guides on the X and Z axes • Preloading of X and Z axis ball screw nuts • New Turcite placed on the X and Z axis carriages • General review and disassembly of the engine and head regula ...
x-travel: 10000 mm y-travel: 3000 mm z-travel: 1500 mm Control: Heidenhain TNC 430CA milling head -swivable: 360.000 pos spindle turning speed range: 10 - 3000 U/min Tools changer: 40 pos. feed: 5000 mm/min Rapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/min spindle motor: 37 kW total power requirement: 80 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: m Traveling column milling and boring machine - Control Heidenhain TNC 430CA & HR 410 - autom. Tool changer with 40 places (SK 50) - Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor - OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independent FAGOR CNC Control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
3D coordinate measuring machine XM 1600 control unit Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7μm Repeatability: +/- 3μm
TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm
NEW, 100 cm width, 125 kg heavy, with Weidemann attachment - 670 mm attchment width, 322 mm attachment height
Key data: 380 mm, 1000 mm, 4000 1/min
Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg
Manufacturer: Heina Model: TT2-1000/1000 Year of Manufacture : 2018 Condition : Very Good Find more here - .ucymachines/ Contact us at - sales@ucymachines
grinding length: 1000 mm grinding width: 750 mm workpiece height: 700 mm Control: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mm table height over floor: 1000 mm table speeds: 3.000 - 30.000 mm/min cross feed of table continual: 5 - 5.000 mm/min cross feed of table intermittent: 0,1 - 65,0 mm vertical adjustment, 1 graduation: 0,002 mm rapid traverse vertical: 0,25 m/min grinding spindle speed: 50 - 2.500 U/min grinding wheel size: ø 400 x 50 x ø 127 mm workpiece weight: max. 1.000 kg table load: max. 1600 kg total power requirement: 33,2 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of Log ...
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm
Container Size With Actual Configuration: 2 l // Number Of Heads: 5
APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...
Dynajet 1000 me, used, blue Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 427 h, Trolly, incl. gun, 10 m HD hose, 15° flat spray nozzle,
Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...
A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
