diesel engine used for sale

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Consists of: collection of four English stationary engines – Lister & Ruston & Hornsby (ca. 1923–1941), three engines from R.A. Lister & Co. Ltd. from Dursley (Gloucestershire, England) and one engine from Ruston & Hornsby Ltd. from Lincoln (England), (1. R.A. Lister Type A, manufacturer: R.A. Lister & Co. Ltd., Dursley, England, type: A, specification: 10, power: 21/2 HP, speed: 600 RPM, serial number: 37212, probable year of manufacture: ca. 1923–1924, single-cylinder four-stroke petrol engine, hopper (open water cooling), original flywheels, original fuel tank, muffler present, chain drive to the ignition, mounted on transport chassis), (2. R.A. Lister Type B, manufacturer: R.A. Lister & Co. Ltd., Dursley, England, type: B, specification: 14A, power: 21/2 HP, rpm: 600 RPM, serial number: 50688, probable year of manufacture: 1925 (autumn), single-cylinder four-stroke, hopper cool ...

Key data: 2679 KW, 1500 1/min

2016 Jenbacher 616 Containerised CHP Unit – Natural Gas Generating Set 2.7 MW at 11kV UK Power Generators Ltd is offering is offering a Jenbacher 616 (J616) containerised Combined Heat and Power (CHP) generating set, manufactured in 2016, configured for natural gas operation and built to ISO 8528 standards. This is a complete containerised power and heat generation solution, ideal for industrial facilities, district heating, greenhouses, utilities, and energy centres seeking high-efficiency CHP performance. Technical Specifications of the available unit: Manufacturer: GE Jenbacher GmbH & Co. OG (Austria) Model: Jenbacher 616 Year of Manufacture: 2016 Fuel Type: Natural Gas Rated Electrical Output: 2.7 MW Rated Voltage: 11,000 V Frequency: 50 Hz Rated Power Factor: 1.0 Rated Current: 141 A Performance Class: G2 Max Ambient Temperature (Intake Air): 30°C  ...

Auction-ID: A1-49793-2917

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Key data: 1559 KW, 1500 1/min

Jenbacher J620GSE139 Gas Engine Only – 1,559 kW – 50 Hz – 2009 – Only 80 Operating Hours Manufacturer: INNIO Jenbacher Model: J 620 GS E139 Year: 2009 Rated Output: 1,559 kW Frequency: 50 Hz Speed: 1,500 rpm Configuration: Engine Only Operating Hours: Only 80 Hours Since New Available for sale is an exceptionally rare and low-hour Jenbacher J 620 GS E139 natural gas engine, manufactured in 2009 and showing only approximately 80 operating hours since new. Opportunity to acquire a unit of this size and specification with such minimal runtime are extremely uncommon, making this engine an outstanding option for power generation projects, plant expansion, standby applications, or replacement requirements. The J 620 series is recognized worldwide for its robust design, high reliability, and proven performance in continuous-duty gas power generation applications. This  ...

INV 6330 - Bulk Engine Lot Auction-ID: A1-49706-146

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

We offer an MWM engine TCG 2032 V16 for sale. Specifications: Engine: MWM Type: TCG 2032 V16 Power: 3000 kW, (Actual power is 4000 kW, it has been reduced) Year of Make: 2009 Runninghours: 67,000 h

Auction-ID: A1-49968-486

Auction-ID: A1-50111-16

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, and pistons.

Manufacturer: IMA , Type: Fügefräsen, Motor with gear: 2 Motoren steuerbar und verstellbar, Spindle length mm: ca.60, Motor with gear: 2 Motoren steuerbar und verstellbar, Speed rpm: ca.2,2 kw/5860 , Overhauled on: inkl. Haube,

Manufacturer: SEW-Motor mit Antriebsriemen, Type: K 37 DT 80, Motor with gear: yes, Maschinennummer: 50.01013736.01.0001.02.03, Power kW: 0,75, Motor with gear: yes, Speed rpm: 2700/303.0,

Manufacturer: Siemens, Type: Synchron-Servomotor 1FK6, Year: 2000, Motor with gear: no, Maschinennummer: MO99 5712 01 003, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 4,5, IP: 64, Motor torque Nm: 6.0/4.0, pm: 3000/3900, Series: 1FK6060-6AF71-1TB0, Motor with gear: no, with motor brake: Ja, FREE TEXT: Brake 24 V/ 15,6 W , 6-poliger Motor, 100K, 3000 1/min selbstgekühlt, IM B5 (V1, V3) Leistungs-/Signalstecker Stecker 270 Grad drehbar, Year :2000

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

Manufacturer: Homag Synchron Aggregateverstellspindel, Gear: 1512-2-8213 AB04J22.04, Gear: 1512-2-8213 AB04J22.04,

Manufacturer: Weeke Z-Achsmotor, Type: Mdd071B-N-060-N2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, n-min: 6000, Weight approx. kg: 9,

Manufacturer: Indramat Weeke Permanent Achsmotor, Type: MDD071B-N-060-N2S-095PL1, Year: MDD071-17391, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Bore mm: 6,6 Nm, Year :MDD071-17391

Manufacturer: Weeke CNC C-Achsmotot Indramat Permanent Magnet Motor , Type: MDD071B-N-040-N2S-095GAO, Motor with gear: yes, Gear: yes, From machine: Weeke, Motor with gear: yes, Gear: yes,

Manufacturer: Indramat Motor Y-Achs Antrieb Weeke/Homag , Type: MDD071B-N-040-N2S-095GA0/7P010-MF1-10-040-000, Maschinennummer: MDD071-17390, Motor torque Nm: 4.40/6.60, IdN A: 11.00/16.60, pm: 4000/6000,

Manufacturer: Indramat Permanent Magnet Motor, Type: MDD071B-N-060N2S-095PL1, Year: MDD071-17392, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Year :MDD071-17392

Manufacturer: Perske Fräsmotor mit Nutenstein Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

Manufacturer: Perske Fräsmotore verstärkte Ausführung, Year: VS.42.20-2, Motor mit Getriebe: 794929, Sek:: IMA, Btr:: 794929, Series: yes, Motor mit Getriebe: yes, Installation height: 133 Volt, Length mm: 200 Hz, Anschlussspindel mm: U/min 11530, Year :VS.42.20-2

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Oil Lift Ring for Bearing Auction-ID: A1-49997-131

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Lenze, Year: ca.1995, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, aus Maschine: Homag, IdN A: 5,5/8,9, Kw output: 7,5, Volt/Hz: 50, pm: 1450, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, Flange motor design: yes, FREE TEXT: mit Disco Verstellgetriebe 11.712.08.20, Year :ca.1995

Manufacturer: Inadramat , Year: 1999, Type: MDD 112B-N-040-N2L-130GAO, Motor mit Getriebe: Motor mit Tacho und Zahnrad, aus Maschine: Weeke BP 195 T, MdN Nm: 17,9-29,9, IdN A: 68, n-min: 4000, Motor mit Getriebe: Motor mit Tacho und Zahnrad, Price per unit Euro: 2000, Wight approx. kg: 36, FREE TEXT: Neupreis ca. 4400, Year :1999

Caterpillar 3412C - Used - 932 kW - 3JK

Caterpillar 3412C - Used - 537 kW - 60M

Caterpillar C4.4 DITA - Unused - 123 kVa - S1M

Caterpillar 3508B - Rebuild - 746 kW - S2E

Caterpillar 3406C DITA - Rebuild - 345 kW - 1SS

Caterpillar C4.4 - Unused - 99kW - S1M

Caterpillar 3412C - Rebuild - 620 kW - 9BR

Caterpillar 3516 DITA - Used - 2200 HP - 29Z

Caterpillar 3508B ? Rebuild ? 783Kw ? S2E

Key data: 110 KW, 1500 1/min

Removed in very good condition rotating

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 350

; Power [PS]: 450

; Power [PS]: 60

; Power [PS]: 70

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 420 mm turning diameter over slide rest: 290 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 210 mm spindle bore: 38 mm total power requirement: 4,0 KW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.