diesel engine with used for sale

Cat. No. 12-1080 in very good condition Measurements and Weight: LxWxH: 820 x 34 x 90 cm Weight: 38 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

fat baking plant Delivery time: 2 weeks Cart/Trolley: 1 loader/Kipptrögel: 10 Total length without storage: 1280 mm Total height: 1075 mm Total width: 820 mm Total length with tray: 2350 mm Total weight: 220 kg Volt / heart: 3 x 400 V / 50 Hz Power supply: 8.6 Capacity: 60 PCs Oil capacity: 67 ltr. Capacity of the trolley: 600 PCs. depending on the weight Operating instructions: german Description Digital display for the oil heater digital display for the fermentation Chamber button for lifting the basket button for lowering the basket

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

Oil mist separator complete device Air output 1100 m3/h Flow temperature 5-45 C° Engine 1.45 kW-230/400V 50 Hz

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Pullers Cross Extractors Furnace Shooter 160cm - Cross cloth pullers - We have 3 pieces in stock - For settling bread and rolls - Made of stainless steel - On wheels Dimensions stainless steel trolley : W: 176cm D: 72 H:186cm Puller dimensions: : W: 162cm D: 61.5cm For details see pictures

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg

SMU Unit without batteriepack, 3HAC14757-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case  ...

Unit without battery pack, 3HAC8365-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...

Trolley for loading - DEBAG Oven

Welding table, straightening table, straightening plate, work table, clamping table straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm

Spiral casing circulation pump without motor, water pump, centrifugal pump, chemical pump KSB HPK-LS 080-200 year 2011 Q: 56.5 m3/h H: 11.9 m n: 1440 rpm New ! Dimensions: 640 x 380 x 450 mm

Centrifugal pump without motor, water pump chemical pump KSB ETABLOC GN 50-125/322 EX year 2001 Q: 60 m3/h Q: 60 m3/hbr /br / H: 13 m n: 2880 rpm Hollow shaft diameter: Ø 28 mm Intake: NW 65 Output: NW 50 New !' Dimensions: 460 x 530 x 410 mm

Centrifugal pump without motor, chemical standard pumps with shaft sealing, water pump DICKOW PUMPEN NCLs65/200 year 1992 Q: 30 m3/h H: 12 m n: 1450 rpm impeller diameter: Ø 200 mm Shaft diameter: Ø 32 mm New ! Dimensions: 600 x 360 x 460 mm

Displacement pump without motor, rotary piston pump, food pump, chemical pump FRISTAM PUMPS FKL 75 FKLS 75 Qmax: 21 m3/h Pmax. : 35 bar Nmax.: 600 rpm DN65 Stainless steel pump ! used ! Dimensions: 720 x 540 x 570 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

consisting of a DICK locker and two oil cabinets Auction-ID: A7-49089-487

consisting of three pieces, two of them as a tool carrier system for VDI mounts Auction-ID: A7-49089-187

consisting of three pieces Auction-ID: A7-49089-486

consisting of three pieces Auction-ID: A7-49089-164

consisting of two pieces Auction-ID: A7-49089-343

consisting of two pieces Auction-ID: A7-49089-423

consisting of 6 pieces, mainly from the manufacturers GARANT and HAHN + KOLB Auction-ID: A7-49089-162

consisting of three different manufacturers with sliding function Auction-ID: A7-49089-502

consisting of three pieces Auction-ID: A7-49089-216

Auction-ID: A7-49089-406

consisting of 11 pieces Auction-ID: A7-49089-504

consisting of two pieces, one 730 x 700 mm and one 1430 x 700 mm Auction-ID: A7-49089-561

consisting of 9 pieces Auction-ID: A7-49089-563

Dimensions per cabinet: 720 x 700 x 1000 mm Auction-ID: A7-49089-150

consisting of two pieces Auction-ID: A7-49089-562

Largest cabinet Dimensions: 1430 x 730 mm Auction-ID: A7-49089-501

Dimensions per cabinet: 950 x 500 x 1950 mm Auction-ID: A7-49089-211

Auction-ID: A7-49089-258

Auction-ID: A7-49089-256

Auction-ID: A7-49089-257

consisting of four pieces of different sizes Auction-ID: A7-49089-560

consisting of four pieces in different designs Auction-ID: A7-49089-163

consisting of four pieces of different designs Auction-ID: A7-49089-170

consisting of three pieces Auction-ID: A7-49089-169

consisting of two pieces Auction-ID: A7-49089-233

consisting of two pieces Auction-ID: A7-49089-503