diesel engine new used for sale

Steyr 6165 Impuls CVT municipal tractor, first registration 31.08.2021, with approx. 3,650 operating hours. The vehicle comes from municipal use and has extensive equipment for year-round use. The continuously variable CVT transmission was renewed in August 2025. ⸻ Equipment: • Continuously variable transmission (CVT), 50 km/h (new 08/2025) • Municipal design • Front mounting plate size 3 • Hydraulic front lift (optional for an extra charge) • Gödde axle support on both sides • Load-sensing hydraulics • S-BRAKE • 4 rear control units • 3 front/center control units • Extensive hydraulic connections front and rear Several additional screens can be seen in the interior, these are not included in the scope of delivery. ⸻ Condition: Used, technically functional and ready for use. Usual signs of wear present, especially on attachmen ...

Complete in orig. packaging with mounting material see pictures Auction-ID: A1-45889-2818

round meeting table high-quality as good as new 160cm diameter Auction-ID: A1-45889-2770

various lengths, colors, widths all new Auction-ID: A1-45889-1636

https://www.eltako.com/fileadmin/downloads/de/_bedienung/DSZ15D-3x80A_ 28380015-1_dt.pdf Auction-ID: A1-45889-2736

Door with door frame Jelt-Wen white 2.17m x 0.965m wide Complete with Montgeset Auction-ID: A1-45889-2784

Würth Polishing Machine - PM 200-E. Condition: used, but in top condition. Technical data: Nominal voltage: 230 V/AC Frequency: 50 Hz Protection class: protection class II / protective insulation Power consumption: 1200 W Power output: 750 W No-load speed min./max.: 900-2700 rpm (rpm) Polishing body diameter max.: 200 mm Thread Type x Spindle Thread Diameter: M14 Length x width x height: 370 x 85 x 150 mm Machine weight: 2.5 kg Cable length: 4 m Description: For painted and metal surfaces With the appropriate accessories, the PM 200-E replaces a satin finishing machine Very handy and light Low effort when working on side surfaces Safe and targeted polishing Double-reduction gearbox enables very low speed Increased safety for the user Soft start and restart protection (after power interruption) Auction-ID: A1-45889-2726

Auction-ID: A1-45889-2721

Auction-ID: A1-45889-2758

https://deko-light.com/Deckenaufbauleuchte---Uni-2-Tilt--12-W--DIM--30 00-K--Weiss--item-DL_DE_348124 Auction-ID: A1-45889-2718

HDMI cable new 7.6m in a box Auction-ID: A1-45889-826

200 xTension rubbers black with plastic closure/ball new Auction-ID: A1-45889-2597

Two black shelves with integrated tray supports As good as new/new black painted Auction-ID: A1-45889-2558

Stainless steel railing with six posts Ground mounting screws As good as new 6 stainless steel struts plus handrail A total of two modules of 2 m each Height approx. 1.10m Auction-ID: A1-45889-764

Brochure stand, black, matte, as good as new, extendable For four grades DIN A 4 Width 24 cm, height 1.32 m, depth approx. 40 cm Auction-ID: A1-45889-1630

Auction-ID: A1-45889-2895

Product information \"Big Bag 90x90x130cm Apron / Bottom Closed\" 4 lifting loops á 25 cm Stable, coated polypropylene fabric resealable thanks to practical apron with tie cord ideal for dusty goods thanks to seam sealing and coating External dimensions (cm): 90 x 90 x 130 Type: U-Panel Filling: apron to tie Coating: Yes Special features: Dustproof Emptying: Bottom closed Lifting loops: Sewn to the side (edge strap) Capacity: 1.05 m³ Max. payload (SWL): 1,500 kg Seams: 2-fold seam sealing SF: 5:1 (one-way) Auction-ID: A1-45889-2705

Complete in orig. packaging with mounting material see pictures Auction-ID: A1-45889-2828

6 Spotlights Dekolight 707009 Die-cast aluminum, white Sandblast optics 4000 K 2100 lm Auction-ID: A1-45889-352

Counter made of white wood-based material – three doors lockable, one to two shelves each. As good as new. Pallet in exchange Auction-ID: A1-45889-737

2pcs 3-phase pendant lamp - Slim Item number: 707133 Housing Material: Aluminum Housing Color: White Housing colour, colour system traffic white RAL 9016 Halogen-free No Frequency 50 / 60 Hz Light Source Light Source Interchangeable TC Light source: LED Luminous efficacy 100.0 lm/W Light distribution symmetrical Color Consistency 6 SDCM Switching cycles 100000 Item weight: 486 g Connection option terminal Energy consumption 5 kWh/1000h Power Factor 0.9 Load Weight max. 0 kg Load force max. 0 kN Working temperature -20 to 45 °C Storage temperature -20 to 65 °C Mounting type: Surface-mounted assembly Mounting location inside Ceiling mounting surface Input voltage 200-240 V/AC Power consumption 5.0 W Dimmable No Motion detector No Power supply replaceable Yes by technician Protection class protection class I / protective earthing UGR 19 Light colour warm white (WW) Colour temperature 30 ...

Detroit Diesel 8.2T V8 turbocharged diesel engine with a displacement of 8.2 liters. This motor delivers up to 250 HP (187 kW) and is renowned for its robustness and reliability. According to information provided by the seller, the engine is new. The exterior condition may show marks or appearance of use typical of storage or factory finish. The unit appears to be complete and includes turbo, fuel system, cooling system and various accessories, as shown in the images. Suitable for industrial, marine applications or conversion projects. Auction-ID: A7-45724-1

For sale here is a distributor injection pump from MAN / Bosch. It is for the MAN 12 cylinder diesel engine. MAN part number: 51.11103-7752. See nameplate. For more data, please refer to the pictures. The pump is as good as new. Ask for price if interested. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception  ...

SUB: FOR SALE... DAIHATSU 5DK 20E YOB 2013 CRANK SHAFT / ENGINE BLOCK / ALTERNATOR ETC TO WHOM IT MAY CONCERN; WE VE 2013 MODEL DAIHATSU 5DK 20E ENGINE BLOCK / STANDARD CRANK SHAFT / ALTERNATOR / CAM SHAFT AT OUR STOCK. READY TO TRANSPORT PLS FIND TECHNICAL DETAILS OF GEN SET ENGINE ENGINE BLOCK 5DK 20E SERIAL NO. 0216 CLASSED WITH LR ON 08-11-2013 CRANK SHAFT S NO. 730351.2.2 CLASSED WITH LR ON 07-10-2013 ALTERNATOR NISHISHIBA 700kW 575VOLTS 900 RPM YOB 07/2013 CLASSED WITH LR 60 Hz ADDATIONALY COMPLETE CAM SHAFT / FRONT TIMING GEARS ETC WE CAN SELL COMPLETE OR SEPERATLY WE SOLD CYLINDER HEADS PISTONS CON RODS / TURBO CHARGER / COOL ETC. Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

CAT C13 overhault engine bloc (RECON) CAT C13 overhault crankshaft (RECON) CAT C13 overhault connecting rods (RECON)

FOR SALE... 3 SETS WARTSILA 6L 20 COMPLETE ENGINES AT TURKEY YOB 1996 / 12 AT TURKEY TO WHOM IT MAY CONCERN; WE VE 3 PCS COMPLETE ENGINES WARTSILA VASA 6L 20 ENGINES AT OUR STOCK. PLS FIND ENGINE SPECT AT BELOW NO. 1 TYPE 6L 20 SPEC NO. 173037 ENGINE NO. 7370 POWER 780kW r/min 720RPM YOB 1996 / 12 VASA FINLAND RUNNING HRS 3383HRS NO. 2 TYPE 6L 20 SPEC NO. 173037 ENGINE NO. 7369 POWER 780kW r/min 720RPM YOB 1996 / 12 VASA FINLAND RUNNING HRS 65731HRS NO 3 TYPE 6L 20 SPEC NO. 173037 ENGINE NO. 7368 POWER 780kW r/min 720RPM YOB 1996 / 12 VASA FINLAND RUNNING HRS 74408HRS ENGINES ARE READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info/al ...

Key data: 840 , 900

FOR SALE... MAK 6M 282 COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE MAK 6M 282 COMPLETE ENGINE AT OUR STOCK. PLS FIND ON BELOW ENGINE DTLS MAK 6M 282 SERIAL NO. 28948 YOB 1982 840 kW REVOLUTION 900 ENGINE READY TO TRANSPORT. EX STOCK-IZMIR / TURKEY PS WE VE SO MANY USED MAJOR PARTS OF THIS TYPE ENGINE AT OUR STOCK. CYLINDER HEADS / PISTONS / CON RODS / LINER / FUEL INJECTION PUMPS / TURBO CHARGER / CAM SHAFTS... ETC EX STOCK READY TO TRANSPORT IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE... 2 SETS PROPOLSUION ENGINES CREPELLE 6R 26L CWR & 6R 26L CCWR TO WHOM IT MAY CONCERN; WE VE 2 SETS PROPOLSUION CREPELLE ENGINES AT OUR STOCK PLS FIND ENGINES DETAILS ON BELOW ENGINES CRANKSHAFT IS MARKED WITH STANDARD SIZE CLASS STAMP. TYPE 26L 6R CWR & 6R 26L CCWR POWER 1323kW ENGINE NO. C037 / C045 RPM 810 YOB 1990 WE CAN SELL ENGINE AS COMPLETE OR WE CAN DISMANTLE AND SELL WITH MAJOR PARTS ENGINES EX STOCK. READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

We sell a reconditioned Scania DC 16 43 A (industrial engine). Before overhaul, the engine had 6600 hours.

TO WHOM IT MAY CONCERN WE VE 3 PCS BERGEN KRG-9 COMPLETE ENGINES AT OUR STOCK. ENGINES HAS BEEN REBUILT ON 2006. ENGINES PRESENT CRANK SHAFTS HAS STANDARTS SIZE CLASS HARD STAMP ON IT. ENGINES MAINTENED WELL. ENGINES ARE TURNING W?TH GOOD SUCT?ON ALL ENGINES READY TO TRANSPORT TYPE KRG-9 ENGINE NO 3186-3187-3188 BUILT YEAR 1986/REBUILT 2006 KW 1825 SPEED 750 MADE IN NORWAY ENGINES TURBO CHARGERS ARE ABB VTR 254-P11 IF YOU VE ANY FURTHER QUEST?ONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST Regards; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Diesel engine industry interest as a complete gene set very good condition over BRA on rapeseed oil 6900 with Leroy Somer generator for sale. If intrested the genset as a complete CHP incl. heat exchangers can be ordered all components year 2009 CHP manufacturer was the company Würz energy GmbH

The Jabsco 15780-0000 is a Cummins bronze Flexible Impeller engine cooling pump with a Flanged Ports, bare shafted pump only. This is a Marine diesel engine cooling pump for Cummins engine models K38 / K50 / KTA38 / KTA50. It is the same pump as Cummins engine part 3393018 / 4314820 / 4314522. Features : Pump Body:Bronze Port Size:Ports are Flanged Product Specs : Flow up to 400 GPM. Constructed from marine quality bronze and stainless steel. Easy to service and maintain. Excellent self-priming even from dry start-up. Unaffected by small solid contaminants. Engineered to high standards. High-grade design delivers extended lifespan.

We offer from stock Zeven-Germany: Refurbished replacement engine Lombardini LDW1404,full version. Engine is without intake manifolds, starters, Lima, oil pan. 12 months warranty MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Phone: 0049 (0) 4281-950583 Fax : 0049 (0) 4281-950585 E-Mail: info@miw-zeven.de abc..miw-zeven.de

MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm1482mm1596mm Weight (kg) Net Weight 5000 kg

Scania diesel engine for generator drive, DC13-073A; Variable continuous power (PRP) 326 kW at 1500 1/min. (New)! Retail price: 19.000,00

General overhault Exchange engine DEUTZ/Lombardini F4M1008F/LDW1404 without starter, alternator, incl. Fuel-injection-system MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 info@miw-zeven.de MIW-Zeven

MAN D 2866 LUH 24

MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned

6 piston KS obsolete piston crown, in Exchange or new

MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €

1 cylinder head Vasa 32 completely overhauled, cooled nozzle, 30° valves

Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €

STD crankshaft / crank shaft

MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned

Motor for Mercedes building model OM 447984-00 Refurbished engine cpl. with fuel injection system, nozzle, water pump, turbocharger, air compressor without starter, alternator and clutch Warranty: 1 year, without KM-limit Identical old part must be returned freight costs: by arrangement

Lombardini 9LD625 / 2, 2 cyl. air-cooled diesel engine, displacement 1250 cm, approximately 19.1 kw / 26 PS 3,000 1/min. More diesel engines: 1-6 cylinder, various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

2 x 3.6MW 60Hz MAN 18V28/32H Power Plant for sale At a time when the world is suffering from a shortage of power generation capacity, we are very pleased to inform you that we have a nice 7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil /  ...

Engine number: 6 902 653 Power: 23 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 7 805 371 Power: 39 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand