We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,093 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool/press tool adapter -Receptacle: Ø 40 mm -Bore: Ø 20 mm -Dimensions: Ø 70 x 135 mm -Weight: 2.6 kg
used
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, adapter -Die tool: forming tool/press tool adapter -Receptacle: Ø 40 mm -Receiving thread: M33 -Quantity: 2x adapters available -Price: per piece. -Dimensions: Ø 40 x 100 mm -Weight: 0.8 kg/pc.
used
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool / press tool adapter MST Ø 85 -Receptacle: Ø 40 mm -Receiving thread: M34 -Dimensions: Ø 85 x 160 mm -Weight: 4.5 kg
used
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: molding tool/press tool -Profile: Ø 98 mm -Receptacle: Ø 40 mm -Dimensions: Ø 98 x 185 mm -Weight: 7.4 kg
used
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: molding tool / press tool 2-part -Profile: angle 90° -Receptacle: Ø 40 mm -Dimensions: 160/140/H345 mm -Weight: 40.1 kg
used
1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor
used
Multiplier piston for die-casting machine TF 1350, SC1400, 161104501, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Piston diameter 219mm, - Piston rod diameter 115mm, - Total length 470mm, - approx. 70 kg - Including the piston rings required for the piston
used
Multiplier cylinder for die-casting machine TF 1350, SC1400, 162007110, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Cylinder inner diameter 220mm, - Cylinder outer diameter 270mm, - Total length 420mm, - approx. 65 kg - Including the required sealings
new
Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.
used
CHARMILLES Type P25 die-sinking EDM Die-sinking EDM. never used. The car turns on
used
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.
used
Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)
used
AUTOMATIC THREAD ROLLING MACHINE, Flat die thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine -Manufacturer: EWM, Flat Die Thread Rolling Machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurl plate: RAA 1.0 -Central lubrication: -Dimension: 1680/920/H1440 mm -Weight: 1308 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 108 mm -Weight: 6.5 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/40 mm -Drawing with the pictures -Total length: 599 mm -Total height: 68 mm -Weight: 28 kg
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22605 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AG 60 L Year of construction: 2012 Travel: 600 x 420 x 370 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm max. workpiece weight: 1500 kg Electrode changer: 6-fold Control: LN2 Quill clamping fixture: EROWA ITS Working container: 950 x 740 x 450 mm
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22603 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AQ 55 L Year of construction: 2007 Travel: 500 x 400 x 350 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm Electrode changer: 32-fold Working basin: 950 x 725 x 410 mm Quill clamping fixture: EROWA
used
EDI Autoflex Extrusion Die width 900 mm.
used
Replacement columns for die-casting machine OL1500, D250 x 5954mm, 250 x 12mm, Oleopress, used - overhauled Special price Attention: We only charge the current raw material price -10%: D 260 x 6m long = 2.550 kg x € 3,5 = € 8925 -10% = € 8032 In addition, we also have a new spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg
new
Tie bar expansion nut for die-casting machine, trapezoidal thread 285 x 10, Oleopress, new Special price In addition, we also have a spare column and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 129 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging.
new
Tie bar expansion nut for die-casting machine OL1500, trapezoidal thread 250x12, Oleopress, new -50% Special price -50% off the original price! In addition, we also have a spare column and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 100 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new.
new
Adjusting nut for die-casting machine OL2000, trapezoidal thread 285 x 10, Oleopress, new -50% Special price -50% of the original price! In addition, we also have a replacement column and 1 piece of spar nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 259 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in its original packaging.
new
Adjustment nut for die casting machine OL2000, trapezoidal thread 285 x 10, oleopress, new -50% Special price -50% of the new price In addition, we also have a spare column and 1 piece of tie back in separate displays. If you have a UID number, we will be happy to issue you an invoice without VAT. Weight approx. 259 kg As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging.
new
Replacement columns for die-casting machine OL1600, D250 x 5908mm, 250 x 14mm, Idra, new -50% Special price -50% from new price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 260 x 6m long = 2.550 kg x € 2,9 = € 7.395 If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg
new
Replacement columns for aluminium die-casting machine OL2000, D285 x 6830mm, 285 x 10mm, Oleopress, new -50% Special price -50% of the original price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 300 x 7m long = 3958 kg x € 2,9 = € 11.478 In addition, we also have a spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging.
used
Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg
used
Capacity: 30 t Bed length: 980 mm Bed width: 850 mm Stroke: 600 mm Day light: 920 mm SPECIFICATIONS Hydraulic / Mechanical Hydraulic Press force 30 Ton Table Length x Width 980 x 850 mm Throat 920 mm Die height 920 mm Stroke Length 600 mm
used
DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: BEEK Rotary Punch DFC Die-cutting and creasing for digital printing incl. compressor - Approx. 15 punching plates available - No need for an experienced operator - Professional cutting and creasing results - Operating errors are virtually eliminated due to fixed cutting gap - Safe to use - Very quick set-up, maximum 3 minutes for the stamped part - Little waste, maximum 5 sheets - Long service life of punching plates - Low tooling costs - Printing mark Register Standard - Modular, adaptable design - Tool-free operation - Ergonomically arranged control panel - Solid construction - Maintenance-free On request, we can organize the following points for you: Packaging, loading, transp ...
used
Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.
used
Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked
used
Oscarmax S550 ZNS EDM Die sinking machine X : 500 mm Y : 400 mm Z : 200 mm Machine is in very good condition
used
Specification IMPERIA F + feeder + Special batch Delivery · Nr. 1 (one) S/H IMPERIA F 120x165cm with electronic feeder and special batch delivery system, delivered, controlled and checked with 6 months warranty · Year of manufacture 2000 · with electronic feeder (no high pile) · Speed Approx. 1350 strokes per hour · min board thickness 400gr/m² · Corrugated board thickness max 7mm · pneumatic clutch- variable speed, · Equipped according to CE regulations · special suction cups with 50mm telescopic – pneumatically adjustable arms · SPS System · PICARD die cutting plate · micrometric adjustment of the pressure in addition to the standard one · special universal chase-mobile delivery table for conveying blanks, pneumatically controlled with automatic lowering device allowing to the opera ...
used
Dayuan MHK-1050 CE Age: 2021 fully automated B1 size diecutting machine. Diecuts sheets from 100 gsm to 3 mm corrugated cardboard. Speed is up to 7000 sheets per hour. Max sheet size: 1050 x 750 mm Min sheet size: 400 x 360 mm Max diecutting size: 1040 x 720 mm Gripper margin: 9-17 mm Inner chase size: 1080 x 745 mm Stock range: 80-2000 gsm cardboard ≤ 4 mm corrugated Die cutting accurracy: ≤ ± 0.1 mm Max diecutting force: 300 T Max diecutting speed: 7500 s/h Max deeder pile hight: 1600 mm Max delivery pile hight: 1400 mm Main motor: 11 KW Overall dimensions: 7700 mm x 4600 mm x 2400 mm Net weight approx: 17 t Full loade wattage: 16,9 kW Available: March 2024 Condition: excelent- like NEW
used
Used ART M50F Die sinking edm machine For sale due to discontinued activity Visible in Italy
used
Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.
used
Hello - we have for sale an Ingersoll IG1000 Die sinking edm machine Table size 900x650 operating range X = 680 Y = 790 Z = 700 Maximum table load capacity = 2000kg
used
CHARMILLES FORM 20 MANUAL - 1990 Die Sinking EDM machine
used
IMPACT ENERGY, KJ 50 NOMINAL WEIGHT OF FALLING PARTS, KG 2000 MAX NUMBER OF BLOWS PER MINUTE 56 WORKING ZONE DAYLIGHT, MM 530 DISTANCE BETWEEN COLUMNS, MM 2360 DIE IMPRESSION SIZE, MM 530 x 300 STEAM PRESSURE, MPA 0,7-0,9 HAMMER DIMENSIONS, MM 4900 x 1930 HAMMER HEIGHT ABOVE FLOOR LEVEL, MM5000 HAMMER WEIGHT WITH ANVIL BLOCK, KG 50100 ANVIL BLOCK WEIGHT, KG 30000
used
AGIECHARMILLES FORM 350Sµ - 2008 Die Sinking EDM machine
used
Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, die head -pipe size. to 3 -Number: 1x cutting head available -Price per piece -Dimensions: 350/270/H90 mm -Weight: 7.9 kg/pc.
used
Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, die head model T20123 -pipe size. 2 to 3 -Dimensions: 310/250/90 mm -Weight: 6.4 kg
used
Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, Die Head Model T20129 -pipe size. 1/2 to 2 -Dimensions: 310/220/90 mm -Weight: 5,5 kg
used
Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, Die Head Model T20129 -pipe size. 1/2 to 2 -Dimensions: 310/280/90 mm -Weight: 6 kg