die used for sale

8 × 2,000 kVA MTU diesel generator sets Less than 2,000 operating hours Complete power plant installation including: Dry coolers Control panels Transform Exhaust mufflers All associated balance-of-plant equipment The plant is complete and can be supplied as a full package. Please let us know if this opportunity is of interest. We will be pleased to provide the technical specifications, photographs, and our commercial offer upon request.

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 5305; Gross weight [kg]: 5305; Engine: CR16TE1W; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 740

The Lemorau MEBR+ is a digital finishing machine built in a modular concept where it can be added modules according to customer needs. The MEBR+ runs in full rotary and semi-rotary mode. Semi-rotary for short runs and full rotary for high speed longer runs. The registration tolerance is maintained during acceleration, deceleration and production time due to the latest servo technology. The Lemorau MEBR+ is equipped with a servo-driven compensator system which provides superior web tension control when the machine is running in semi-rotary mode., Standard Features, - Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels, - Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register, - Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register, - Web width 250, 330, 400 mm (10, 13, 16 in), - Electronic Counter (Labels/ Meters/  ...

A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 3565; Gross weight [kg]: 3565; Engine: C87TE4; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 449

Technical details Type: Electric motor terminal box assemblies Configuration: - Die-cast aluminium terminal box housings - Matching terminal box covers - Threaded cable entry ports - Precision-machined mounting faces - Cover mounting holes - IEC motor terminal box design Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined interfaces Estimated quantity: - Terminal box housings: Approx. 12–15 pcs - Matching covers: Approx. 40–60 pcs - Several complete housing-cover assemblies - Additional loose spare covers included Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 2 kg per housing Condition: New old stock (unused) Observed condition: - Clean machined su ...

Key data: 451 KW, 1500 1/min

1Scania - Diesel engine for generator drive, type DC16 093A ( 02- 51 ) Prime Power PRP Fuel Optimized 451 kW at 1500 rpm Equipment: Standard motor with: -Exhaust bend 90° with flange -Without fan drive -Without fan and cooling system -Flywheel 14" -Heavy flywheel housing ( cast iron ) -Engine feet, 230 mm, counter-flywheel side -Engine colour orange, exhaust parts unpainted -Closed crankcase vent

Caterpillar diesel power plant consisting of 8 generating sets rated at 2,000 kVA each, in excellent operating condition. Technical Specifications Quantity: 8 Generator Sets Rated Output: 2,000 kVA each Engine Model: Caterpillar 3516A Alternator: SR4 Cooling System: Skid-mounted radiators Operating Hours: Approximately 9,000 hours per unit Control Panels: Included Dry-Type Transformer: Included Exhaust System: Included

- Brand manufacturers - draws lines from finished dies - Safe - Fast

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg

Sandt large-area die-cutter, 150 tons printing capacity, 2 columns, with fully automatic feeding for roll goods (10 to 20 rolls depending on material thickness). The punching width is 1,600 x 900 mm

table length: 430 mm table width: 300 mm x-travel: 260 mm y-travel: 160 mm z-travel: 300 mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connecting rod / bar frame strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD bar frame. Technical data: Overall length: approx. 3,270 mm D1: 190 mm D2: 150 mm Material thickness: 50 mm Centre-to-centre distance: approx. 3,020 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Adjusting nut for IDRA2500 die-casting machine, pull out, TR300x10, 41460000210109, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjustable nut, Tr300x10, D470/410 mm x 325 mm high. Approx. 200 kg for IDRA 2500 die-casting machine, The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjustable nut with drawbar for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Adjustable nut with drawbar, Tr330x10, D470/410 mm x 325 mm high. Approx. 200 kg, for IDRA 3300 die-casting machine, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

pressure: 4000 kN table length: 2500 mm table width: 2000 mm dayligth: 2500 mm stroke: 2600 mm tank capacity: 1000 l total power requirement: 56 kVA weight of the machine ca.: 85 t dimensions of the machine ca.: 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t table length: 670 mm table width: 570 mm total power requirement: 8 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2 x 2 x 3 m No. 2886 Spotting press 200 kN RICE TUS 60 OK 20 Stroke approx. 700 Drive: 7,5 kW Hydraulic control Extendable table 670 x 570 mm, Swivel-out top plate 670 x 570 mm, Installation height 740 mm Clearance between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 to. Asking price: 8.500,-- ex works / EXW Asking price: 12.900,-- EXW warehouse loaded free on suitable truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t table length: 2200 mm table width: 1550 mm dayligth: 2200 mm ram return capacity: - kg table load capacity: - kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 4 7 7 m Packing: ca. 13,4 x 3 x 3 m Movie: https://www.youtube.com/watch?v=uKo7tPpdbYw The price listed is ex-warehouse in 64653 LORSCH. If you pick up the goods ex-factory, the price will be lower. Please feel free to contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t table length: 1280 mm table width: 900 mm total power requirement: 7 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3 x 2 x 3,6 m m No. 5282 Spotting press 400 kN REIS TUS 90 OK 40 Working area: table 900 x 1280 Column passage 930 x 705 mm Table top 900 x 1280 mm ram plate 900 x 1200 mm Installation height 1035 mm Space requirement approx. 3 x 2 x 3.6 m Transport dimensions approx. 4 loading meters, width 2.20 / height 2.80 Weight approx. 8 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 780 mm table width: 500 mm ampere: - A Control: Heidenhain 121 total power requirement: - kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2 x 2 x 2 m No. 1564 Die-sinking EDM machine HANSEN 750 S max. workpiece weight 100 kg Working area: 500 x 300 x 375 Control: Heidenhain TNC-121 Eropuls NC-2000 Table 780 x 500 mm Space requirement approx. 2 x 1.5 m Weight approx. 3.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tie bar expansion nut for die casting machine IDRA1800, TR260x9, 446808, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Tie bar expansion nut, Tr260x9, D465x300mm high. Approx. 300kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date ...

Adjusting nut for die-casting machine OL2000, pull out, TR285x10, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjusting nut for die-casting machine OL1500, pull out, TR250x12, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmdehnmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Adjustment nut for die casting machine IDRA OL1800, pullable, TR260x9, 170359, Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, Adjuster nut, pullable, Tr260x9, D390/338x300mm high. Approx. 115kg for die casting machine IDRA OL1800/1750 The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D370, D330, D300 6 months warranty We give you a 6-month warranty for these goods f ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 141384, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x345mm high. Approx. 255kg for die casting machine IDRA OL1800/1750 With bronze contact rings on both sides, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 990542, Idra, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the ...

Adjusting nut for die casting machine IDRA1800, TR260x9, 151913, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In  ...

AGIE CHARMILLES ROBOFORM 550 ist eine Senkerodiermaschine, ausgelegt für hohe Präzision, Genauigkeit und Zuverlässigkeit. Tisch 750×600 mm, max. Werkstückgewicht 1600 kg; Werkstück bis 1200×850×400 mm; Verfahrwege X 600 mm, Y 400 mm, Z 450 mm; Elektrodengewicht bis 100 kg. Anschluss 3×400 V 50 Hz; Maschinengewicht ~4500 kg; Abmessungen 3150×2750×2960 mm. Ermöglicht enge Toleranzen; Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

MAKINO EDNC 30F ist eine Senkerodiermaschine, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Tisch 500 x 350 mm mit 4 T-Nuten (10 mm, Abstand 80 mm), max. Tischbelastung 500 kg; Verfahrwege X 300 mm, Y 250 mm, Z 250 mm; größtes Elektrodengewicht 50 kg; Dielektrikum 60 l (650 x 450 x 300 mm). Technische Hauptdaten: Eilgang 20 m/min; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 4100 kg; Abmessungen 2800 x 2200 x 2300 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft-/Raumfahrt, Medizintechnik, Uhrenindustrie, Werkzeugbau. Technische Daten ohne Gewähr

SODICK AM3L ist eine Senkerodiermaschine, ausgelegt für hohe Präzision, große Genauigkeit und Zuverlässigkeit. 3 Achsen; Verfahrwege X 300 mm, Y 200 mm, Z 250 mm; Werkstücke bis L 600 × B 400 mm, Tischbelastung max 550 kg. Maschinengewicht ca. 2000 kg; Abmessungen L1260 × B1250 × H2315 mm. Werkzeugwechsler: 4 Werkzeuge. Eignet sich für enge Toleranzen; Branchen: Automobil, Uhrmacherei, Maschinenbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

Cabinet dimensions: H: 2000 W: 600 L: 1000 Auction-ID: A7-49302-3003

Key data: 1288 KW, 1610 kVA, 480 V

Forty (40) New Diesel Generator set, 1610 kVA, 1288 kW, Standby, 1418 kVA, 1,134 kW Prime, 480v. 60 Hz. 1800 RPM, Diesel generator sets. Key Features: - Stamford alternator S6LD-G4/ LSA 50-2M6. - DSE7310 MKII Auto Start Controller. - ACB Fixed Type 3 Pole 2000 amp circuit breaker. - Tropical Radiator. - Anti Vibration Mountings - Non-Tier Diesel Generator sets - for sale outside the USA only! - Warranty

Key data: 1825 KW, 2281 kVA, 13 V

Five (5) Surplus Caterpillar 3516B, 1825 kW Prime, 13,800v. 60 Hz. 3 Phase, 0.8 P.F. Diesel Generator sets. These 2281 kVA Prime, Diesel generator sets for continuous parallel. They were manufactured in 2013 and were never used. They come with a electric starter 24v. prelube pump, Jacket Water Heater, Fuel filter, Air Filter, radiator cooled, Paralleling control system, 2760 frame generator, exhaust system with catalyst, open skids

Key data: 2145 KW, 2681 kVA, 400 V

Four (4) Quality Used Cummins qsk60-g8, C2500, 2145 KW, (Each) 400v, 50 Hz. Open Skids Diesel Generator Sets. · Hours Since New: less than 50 · Year of Manufacturing: 2021 · Generator End: Samford, model HVS1804S1 ·Radiator Cooled · Exhaust System · Fuel Filters · Air Filters · Oil Filters Units are ready for dismantling.

Key data: 394 KW, 493 kVA, 400 V

Polyma Diesel Emergency Power MA 1205005E65S Diesel generator from 1993, 1,336 operating hours, Container with control system and 2 x 2,000 l tanks. 1 available 394 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: MarelliMotori M7B3165KA52580, 525 KVA Manufacturer: Polyma Model No.: MA 1205005E65S Type: Diesel Emergency Power Generator Container Serial Number: 192023 Power [KVA / KW]: 493 / 394 Engine: MAN D2842LE (1992) Engine power: 424 Engine Serial Number: 49369180944201 Year of Make: 1993 Engine hours: 1,336 Total container weight [kg]: 11,000 Container dimensions [m]: 9.12 x 2.44 x 2.59 AC generator MarelliMotori M7B3165KA52580 Manufacturer: MarelliMotori Model No.: M7B3165KA52580 Type: AC Synchronous Generator Serial Number: MU5267 Power [KVA]: 525 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 759 Speed [1/min]: 1,500 Year of Make: 1993 Weight [ ...

Caterpillar Model 3516B generator set, 2015 model year. Rated power: 2,281 kVA, 1,825 kW; rated voltage: 13,800 V; rated frequency: 60 Hz; rated RPM: 1,800. Never used; started only for testing purposes.

Generator, power 100 kW, Ricardo brand 4-cylinder water-cooled engine, equipped with consumption reduction system, automatic electric ignition, digital control panel, electronic voltage control, 230/380 volt outputs Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2450 x 1200 x 1500 mm Weight: 1300 kg Auction-ID: A7-49514-108

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-49495-145

Generator, power 100 kW, Ricardo brand 4-cylinder water-cooled engine, equipped with consumption reduction system, automatic electric ignition, digital control panel, electronic voltage control, outputs 230/380 volt Never used 0 hours, the power indicated refers to the peak power. Overall dimensions: 2450 x 1200 x 1500 mm Weight: 1300 kg Auction-ID: A7-49495-135

Salini VGR-15 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control. Outputs 220/380 Volt, power 15 kW. Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1200 x 650 x 800 mm Weight: 250 kg Auction-ID: A7-49495-311

Generator, power 100 kW, Ricardo brand 4-cylinder water-cooled engine, equipped with consumption reduction system, automatic electric ignition, digital control panel, electronic voltage control, outputs 230/380 volt Never used 0 hours, the power indicated refers to the peak power. Overall dimensions: 2450 x 1200 x 1500 mm Weight: 1300 kg Auction-ID: A7-49514-16

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA never used 0 hours, The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-49514-161

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-49495-312

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-49514-196

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-49514-84

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-49514-96

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-49514-333

Salini VGR-15 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control. Outputs 220/380 Volt, power 15 kW. Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1200 x 650 x 800 mm Weight: 250 kg Auction-ID: A7-49495-70

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-49514-233