141,102 used machines on RESALE, but how to find them? Machine Search
Lister generator set 22 kVA incl. start unit + tank + exhaust - - - - - Special feature: - The device is a pure 230 volt 1-phase generator - This makes it ideal for house security / building feed-in - - - - - Engine: - Lister (English manufacturer of diesel industrial engines) - Model: LPWT4 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Power: 22 kVA - 230 volts - 50 Hertz - 1-phase generator - - - - - Start Unit: - Ignition lock / start button for starting - 1x volt display - 1x Hertz display - 1x Ampere indicator - Engine monitoring: oil level, engine temperature, battery voltage - Hour meter (649 hours) - Emergency stop switch - - - - - Condition: - The generator is a pure emergency system for emergency power protection - It has only run for 650 hours of operation - A test run was done - The generator st ...
Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water-cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR regulator (+/- 1%) - - - - Equipment: - Electric start - AVR regulator - 1x 400V 32A socket - incl. safeguards - Key start - Voltmeter + phase selector switch - Hertz display - Hour meter - Emergency stop switch - - - - - Engine Control Unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not OK - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 ltr. / h (75%) - Tank volume: ...
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 2409; Gross weight [kg]: 2409; Engine: NEF67TM7; Accessories: Product features:, Drip-tray, Starter battery, Exhaust system; Water Tank Volume [l]: 600
40-foot containerized generator. MTU 16V396 engine. LEROY SOMER A51L8-4P Power: 2000 kVA. Air cooling installed on the container roof. Year: 1995. Known operating hours in 2021: 7146 Separate electrical cabinet in a container. High-voltage transformer in a container. One set of exhaust piping in a container with outlets on the container roof.
Key data: 648 KW, 810 kVA
Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 1868; Gross weight [kg]: 1868; Engine: NEF45TM3; Accessories: Product features:, Switch board, Starter battery, Exhaust system; Water Tank Volume [l]: 390
This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine.
Key data: 1140 KW, 2250 1/min
Used MTU 16V2000 M72 – Port Side – Available Now Well-maintained MTU 16V2000 M72 marine engine from 2013 and strong remaining lifetime. A reliable high‑performance choice for shipowners, operators, and shipyards seeking a proven propulsion solution. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 111 995 Configuration: Port Side Year of Manufacture: 2013 Power Output: 1440 kW Rated Speed: 2250 rpm Weight: 3550 kg Operating Hours & Service Status Total operating hours: 31,427 h (as of 12/2023) QL4 major service completed: 09/2022 at 26,537 h Remaining hours before QL3 service: approx. 1,100 h TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is dry, complete, and in good technical condition. It has been operated in a professional environment with continuous maintenance and is ready for inspection and quick delivery. Key Advanta ...
Key data: 1140 KW, 2250 1/min
Used MTU 16V2000 M72 – Starboard Side – Available Now Reliable and well‑maintained MTU 16V2000 M72 marine engine recent QL3 overhaul with minimal operating hours since. A strong option for shipowners, operators, or shipyards looking for a robust and ready‑to‑install propulsion engine. Engine Details Model: MTU 16V 2000 M72 Serial No.: 536 110 966 Configuration: Starboard Side Year of Manufacture: 2013 (visible on nameplate) Weight: 3560 kg Operating Hours & Service Status Total operating hours: 28,597 h (as of 12/2023) QL4 major service completed: 03/2022 QL3 overhaul completed: 10/2023 Running hours since QL3: Very few TBO (Time Between Overhaul): 12,000 h Condition & Availability The engine is complete, dry, and in excellent technical condition due to the recent QL3 overhaul and minimal runtime afterward. Ready for inspection and immediate delivery. Ke ...
Key data: 809 KW
Complete and overhauled. Engine no.: 1214417 Engine Perf. code: 2411048
Key data: 1140 KW, 2250 1/min
Engine disassembled. Block and crank shaft damage. Can be sold in single part or all parts.
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 1656; Gross weight [kg]: 1656; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Starter battery, Exhaust system; Water Tank Volume [l]: 390
Key data: 100 t
For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...
; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55
; Gross weight [kg]: 706; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55
Key data: 1000 KW, 1800 1/min
Cummins K38‑M marine diesel engine, Engine No. 26433858, manufactured 16/03/2018, built to CPL 4291 and Rating No. 5376382. The engine is recently overhauled and has 9000 operating hours, offering a reliable 38‑liter V‑configuration with mechanical PT‑fuel system and robust continuous‑duty marine performance.
new
Key data: 1000 KW, 1800 1/min
New. Located at Cummies dealer in Esbjerg, thus no photos.
; Gross weight [kg]: 608; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 66
; Gross weight [kg]: 1416; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219
Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible.
4 cylinder; donor motor; Auction-ID: A1-50707-333
This 3-axis HUBER OCT-3020 NA die-sinking EDM machine was manufactured in 2006. It features a travel of 300 mm in the X-axis, 200 mm in the Y-axis, and 350 mm in the Z-axis, accommodating workpieces up to 460 x 210 x 200 mm. If you are looking to get high-quality die-sinking capabilities, consider the HUBER OCT-3020 NA machine we have for sale. Contact us for further details.
: : : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis AGIE AGIETRON INTEGRAL 2 was manufactured in 2006. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 350 mm in the Z-axis. The machine can accommodate workpieces up to 840 x 670 x 250 mm and has a maximum electrode weight of 100 kg. If you are looking to get high-quality die-sinking capabilities, consider the AGIE AGIETRON INTEGRAL 2 machine we have for sale. Contact us for further details.
trailer with 3 Cummins generators 300 kva 180 kva 60 kva
On and including 1x pallet Auction-ID: A1-50889-114
; Gross weight [kg]: 5500; Engine: Perkins 2806C-E16TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 950
Used SCANIA DC16 in parts Cylinder heads completely overhauled Missing: - Starter - Alternator - Crankshaft - Engine block - Camshafts
Easily bring large quantities of fuel to the site? Then this large tank is the ideal solution with a 12v Diesel pump Auction-ID: A3-46110-5779
CNC Tube Bending Machine manufactured in 2018. This CANSA CNC 51 R1 features a maximum tube diameter of 51 mm and a maximum wall thickness of 4 mm. It includes a mandrel and part configuration software for enhanced bending capabilities. If you are looking to get high-quality bending capabilities, consider the CANSA CNC 51 R1 machine we have for sale. Contact us for further details.
Die-sinking EDM machine manufactured in 2010. This AgieCharmilles FORM 30 features a table length of 800 mm and a table width of 600 mm. It offers an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details.
This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine.
Key data: 150 KW, 188 kVA, 400 V
MAN emergency power generator D 2156 MTL Diesel emergency generator from 1976, unknown operating hours, with control, day tank, storage tank and batteries. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator Stamford C434B, 175 KVA Manufacturer: MAN Model: D 2156 MTL Type: Diesel Emergency Power Generator Serial number: 1768/51 Power [KW]: 150 Year of Make: 1976 Operating hours: unknown Weight unit [kg]: 4,000 Dimensions unit LxWxH [m]: 3.00 x 1.10 x 1.80 AC Generator Stamford C434B Manufacturer: Stamford Model No.: C434B Type: AC Synchronous Generator Serial number: 43450/1 Power [KVA]: 175 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 252 Speed [1/min]: 1,500 Year of Make: 1976
New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel
Key data: 200 KW, 250 kVA, 400 V
Olympian Caterpillar Diesel generator in good condition. It has the following specifications: Power: 200kVA/ 200kW Year: 2009 Hours: 7000 approximately. Soundproof chamber with control panel. Video of operation available upon request
Flywheel size: SAE0/18; Gross weight [kg]: 2100
A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.
Flywheel size: SAE0/18; Gross weight [kg]: 1836
Flywheel size: SAE1/14; Gross weight [kg]: 1500
Flywheel size: SAE1/14; Gross weight [kg]: 1414
Tool change trolley, lifting table trolley, pallet truck, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift -Retracted height: 755 mm -Height extended: 1105 mm -Max. Stroke: 350 mm -Number: 1x tool change trolley available -Price: per piece -Transport dimensions: 890/580/H755 mm -Own weight: 170 kg
Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg
Flywheel size: SAE1/14; Gross weight [kg]: 854
Flywheel size: SAE3/11.5; Gross weight [kg]: 385
Flywheel size: SAE3/11.5; Gross weight [kg]: 270
maximum number of results exceeded
please refine your search
50 € 
