141,102 used machines on RESALE, but how to find them? Machine Search
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 18221; Gross weight [kg]: 18221; Engine: C32; Accessories: Product features:, Drip-tray, Switch board, Voltmeter, Amp meter, Hertz meter, Starter battery, Exhaust system
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 9000; Gross weight [kg]: 9000; Engine: C32 (Remanufactured by Cat ); Accessories: Product features:, Switch board, Voltmeter, Amp meter, Hertz meter
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 18250; Gross weight [kg]: 18250; Engine: KTA38-G5; Accessories: Product features:, Drip-tray, Switch board, Voltmeter, Amp meter, Hertz meter, Starter battery, Exhaust system
Key data: 1257 KW, 1580 kVA, 400 V
Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 10500; Gross weight [kg]: 10500; Engine: KTA50-G3; Accessories: Product features:, Switch board, Voltmeter, Amp meter, Hertz meter, Starter battery
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 23500; Gross weight [kg]: 23500; Engine: S16R-PTA2; Accessories: Product features:, Drip-tray, Switch board, Voltmeter, Amp meter, Hertz meter, Starter battery, Exhaust system
Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 14500; Gross weight [kg]: 14500; Engine: S16R-Y2PTAW2; Accessories: Product features:
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 14500; Gross weight [kg]: 14500; Engine: S16R-Y2PTAW2; Accessories: Product features:
12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 14500; Gross weight [kg]: 14500; Engine: S16R-Y2PTAW2; Accessories: Product features:
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 2409; Gross weight [kg]: 2409; Engine: NEF67TM7; Accessories: Product features:, Starter battery; Water Tank Volume [l]: 600
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 22630; Gross weight [kg]: 22630; Engine: N67TM3A; Accessories: Product features:, Drip-tray, Starter battery; Water Tank Volume [l]: 450
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 1568; Gross weight [kg]: 1568; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Starter battery, Exhaust system; Water Tank Volume [l]: 390
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 1568; Gross weight [kg]: 1568; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Starter battery, Exhaust system; Water Tank Volume [l]: 390
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNm PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mm SLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passag ...
Key data: 8750 KW, 10938 kVA, 11000 V
10.5 MW MAN Germany 18V32/40 HFO power plant, year 2014, average running hour : 10,000 hrs. Good shaped, well maintenance power plant for sales
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 2263; Gross weight [kg]: 2263; Engine: NEF67TM3A; Accessories: Product features:, Drip-tray, Starter battery; Water Tank Volume [l]: 450
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 3565; Gross weight [kg]: 3565; Engine: C87TE4; Accessories: Product features:, Drip-tray, Starter battery, Exhaust system; Water Tank Volume [l]: 449
Fast delivery., New and used., Customizable to your needs.; Transport weight [kg]: 3565; Gross weight [kg]: 3565; Engine: C87TE4; Accessories: Product features:, Drip-tray, Starter battery, Exhaust system; Water Tank Volume [l]: 449
We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.
Key data: 1185 KW, 1000 1/min
DUE TO NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 RIGHT-TURNING SHIP ENGINE REMOVED IN THE ROTATING STATE
CATERPILLAR C 175-16 year 2011 hours 100 power 3000 kva includ dry cooler and muffler loaded now in paris
Key data: 3300 KW
We have 28 unit diesel main engine MTU with their gear boxes. For more information, do not hestitate to contact with us. Engines 1981 model but some of them revised 2010 by MTU.
; Gross weight [kg]: 1989; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
; Gross weight [kg]: 765; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Power [PS]: 170; Gross weight [kg]: 8250; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach
This 3-axis ONA NX6 die-sinking EDM machine was manufactured in 2007. It features a working table dimension of 1,000 × 700 mm and an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 400 mm. With a maximum table load of 4,000 kg, this machine is designed for high-quality machining capabilities. If you are looking to get high-quality die-sinking capabilities, consider the ONA NX6 machine we have for sale. Contact us for further details.
Available docments:, - Maintenance reports and logs, - Installation drawings, - Electrical drawing; Gross weight [kg]: 17500; Engine: Caterpillar G3520C; Accessories: Control Panel, Complete including roof radiatior, gas piping etcetera.
Available docments:, - Maintenance reports and logs, - Installation drawings, - Electrical drawing; Gross weight [kg]: 17500; Engine: Caterpillar G3520C; Accessories: Control Panel, Complete including roof radiatior, gas piping etcetera.
Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified
Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l
A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.
NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake
Diesel Fuel Tank 1000 Liter, 1.000 Liter Tank, KIWA Certified; Gross weight [kg]: 540
Diesel Fuel Tank 2.000 Liter, 2.000 Liter Tank, KIWA Certified; Gross weight [kg]: 823
Requesting a EUR.1 Certificate is possible for this Generator., , Warranty:, 1 year for continuous use, 2 years for standby use; Gross weight [kg]: 1453; Engine: Cummins 4BTAA3.3-G14; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 200
; Gross weight [kg]: 6345; Engine: Cummins QSK23-G3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
; Gross weight [kg]: 18720; Engine: Baudouin 12M33G1650/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater; Water Tank Volume [l]: 3000
Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines
; Gross weight [kg]: 21350; Engine: Baudouin 16M33G2000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 3000
This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details.
Manufactuer: JCM Model: DBD4600 Year of Manufacture: 2011 Condition : Good Find more here - .ucymachines/ Contact us at - sales@ucymachines
Payload: 4000 kg Permissible total weight: 10790 kg Fork length: 1.2 m-2 m Lifting height: 3.45 m Recorded hours: 4577.77, still in operation
PG-D 80 TEA-S HC Generator for home feed-in 230V / 400V Time-limited output power 8.0 / 8.9 kVA Time-limited output power 6.4 / 7.5 kW Runtime at 50% load: 7.5h Protection class socket IP 44 Protection class generator IP 23 Fuel diesel, 15l tank Starter E-Start Dimensions: 950x550x690 mm Weight approx. 151kg G&STÜ-6731080
maximum number of results exceeded
please refine your search
