129,060 used machines on RESALE, but how to find them? Machine Search
Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-5
Slide size 1520x1070 mm Slide stroke 254 mm Shots per minute 36 Opening between the uprights 1520x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-11
Technical details Type: Industrial fastening components (clamping bolts / tie rods) Configuration: Heavy-duty threaded rods with hex heads Quantity: Approx. 18–25 pieces Thread size: Estimated M24 – M42 (metric coarse) Length range: Approx. 300–700 mm Material: High-strength steel (industrial grade, approx. 8.8–10.9 equivalent) Design features: - Long cylindrical load-bearing shanks - Hex heads for high-torque tightening - Some stepped/shouldered sections for alignment Application: Tool clamping, die fixing, press fastening, and heavy fixture mounting Dimensions and weight (approx.) Length: 500 mm (average) Width: 60 mm Height: 60 mm Weight: 250–400 kg (total) Auction-ID: A7-46498-130
Dimension of press: 1400x1400x1600mm, Workshop screw press, incl. assortment of tools; for more details see photos of Regal Auction-ID: A7-46619-324
Jaw width approx. 125mm, Clamping forces: 0=direct, 1=10kN, 2=20kN, 3= 30kN, 4= 40kN Auction-ID: A7-46619-283
Rebuilt in 1993, Press force: 200 t, Table size : 1250 x 1000 mm, large removal of clamping surface to ram: 900 mm, Plunger stroke: 500 mm, Kickback force: 29000 kg, Hold-down device large stroke: 250 mm, Ejector: 250 mm away, Power requirement: 25 kw, Speed: 960 rpm, Minimum installation height: 400 mm, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-220
Rebuilt in 1992 by Beck & Röhm, Printing capacity: 630t, Clamping surface: 1730x2500 mm, Number of grooves. 8, Plunger stroke: 900 mm , Installation height: 1550 mm, Power requirement: 2 x 7.5 kW, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-210
General description Set of 2 manual industrial presses suitable for light pressing, riveting, assembly, and small stamping operations. Compact and robust units for workshop use. Technical details Type: Manual presses (arbor / toggle type) Quantity: 2 units Operation: Hand-operated lever system Configuration: - 1x vertical arbor press (simple design) - 1x adjustable press with geared head and return spring Capacity: Estimated 0.5 – 2 tons Construction: Cast iron body Mounting: Bench or floor-mounted base Application: Pressing, riveting, bearing insertion, light punching and assembly tasks Equipment - Vertical rams - Hand levers - Flat die/work surfaces - Adjustable head mechanism (on one unit) Condition and remarks Used machines. Show typical wear from workshop use. Structurally robust and suitable for continued operation. Sold as a set. No electrical component ...
PRESSURE UNIT KARCHER Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1015
Machine No: ZE 400.16.1.11.U, rebuilt in 1993, Press force: 400t, Table size: 1600x1300 mm, Run-up time 90 ms. The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-230
Hand sheet metal shears, Dimension: 1000x260x1800mm; Mandrel press, Dimensions: 600x400x1500mm ; see photos for more details Auction-ID: A7-46619-322
MÜLLER CT16.4.1 – Hydraulic Press General data: Manufacturer: Müller Model: CT16.4.1 Machine number: 221 094 A110 Year of manufacture: 1991 Machine type: Hydraulic press Technical details: Pressing force: 16 tons Description: Compact hydraulic press MÜLLER CT16.4.1 designed for pressing, forming, and assembly operations. Suitable for workshop and industrial applications requiring controlled pressing force and reliable operation. Auction-ID: A7-46498-107
Type: SE201/125.1.2, Printing capacity: approx. 200t, Table surface approx. 1600x1300 mm, Stroke max. approx. 600mm, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-240
Dimension on clamping table: 1000x140 Condition: possibly defective Auction-ID: A7-46619-356
HYDROSTATIK HFM610 – Hydraulic Press General data: Manufacturer: Hydrostatik Franz Mertl Model: HFM610 Machine number: 6562 Year of manufacture: 1988 Machine type: Hydraulic press Technical details: Pressing force: 10 tons Stroke: 400 mm Operating pressure: 200 bar Drive power: 5.5 kW Description: Hydraulic press HYDROSTATIK HFM610 designed for pressing, forming, and assembly operations. The machine offers controlled force application and a long stroke, making it suitable for workshop and industrial applications. Auction-ID: A7-46498-117
MÜLLER T6.3.3.14 – Hydraulic Press General data: Manufacturer: Müller Model: T6.3.3.14 Machine number: 9157 Year of manufacture: 1976 Conversion: Updated according to UVV 11.064 (07/1992) Machine type: Hydraulic press Technical details: Pressing force: 8 tons Description: Compact hydraulic press MÜLLER T6.3.3.14 designed for pressing, forming, and assembly operations. The machine has been upgraded to comply with safety regulations and is suitable for workshop and industrial applications requiring controlled pressing force. MÜLLER T6.3.3.14 – Hydraulic Press General data: Manufacturer: Müller Model: T6.3.3.14 Machine number: 9157 Year of manufacture: 1976 Conversion: Updated according to UVV 11.064 (07/1992) Machine type: Hydraulic press Technical details: Pressing force: 8 tons Description: Compact hydraulic press MÜLLER T6.3.3.14 designed fo ...
Technical details Manufacturer: Gebrüder Röcher Maschinenbau (Germany) Model: REP 20.02 N Year: 1982 Type: Hydraulic press (vertical) Press force: 200 kN (approx. 20 tons) Stroke: 450 mm Working speed: Approx. 31 mm/s Approach speed: Approx. 276 mm/s Return speed: Approx. 335 mm/s Motor power: 7.5 kW Voltage: 380 V / 50 Hz Fuse rating: 35 A Control: Manual control station (pendant) with emergency stop System: Hydraulic drive with integrated control cabinet Application: Forming, pressing, punching, and assembly operations Dimensions and weight (approx.) Length: 2000 mm Width: 1200 mm Height: 2500 mm Weight: 1500 kg Auction-ID: A7-46498-165
Max. clamping force: 40kN, Jaw width approx. 125mm ; see photos for more details Auction-ID: A7-46619-284
HYDROSTATIK HFM406 – Hydraulic Press General data: Manufacturer: Hydrostatik Franz Mertl Model: HFM406 Machine number: 4589 Year of manufacture: 1979 Conversion: Updated according to UVV 11.064 (06/1992) Machine type: Hydraulic press Technical details: Pressing force: 6 tons Stroke: 300 mm Operating pressure: 120 bar Power consumption: 3.0 kW Voltage: 380 V Description: Hydraulic press HYDROSTATIK HFM406 designed for pressing, forming, and assembly operations. The machine has been upgraded to comply with safety regulations and offers reliable performance for workshop and industrial applications. Auction-ID: A7-46498-119
Professional pressotherapy system designed for lymphatic drainage and body treatments. Includes full body compression suit with multiple air chambers for legs, abdomen and arms. Equipped with adjustable pressure programs and control panel for customized treatments. Suitable for improving circulation, reducing fluid retention and aesthetic body treatments. Auction-ID: A1-46551-4
pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...
pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...
pressure:6 t stroke:1020 mm total power requirement:3,5 kW Can only adjust between tips Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.
Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...
pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden
pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden
pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden
pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic
pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m
pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250
Pressure:080 t throat:380 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:472 mm table surface area:840 x 610 mm table height over floor:800 mm passage to the back:520 mm ram surface:650 x 400 mm ram adjustment:70 mm power capacity:7,5 kW weight:6,9 t Dimensions (WxDxH):1,1 x 2,15 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic
pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary
pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
pressure:350 t distance between columns:1350 mm stroke:900 mm distance table/ram, max. stroke up, adjustment up:1300 mm table surface area:1300 x 1000 mm pressure of drawing cushion in table:100 t stroke of drawing cushion in table:380 mm die cushion area:350 x 285 mm capacity of ejector in ram:25 t ejector stroke in ram:200 mm table height over floor:750 mm ram surface:1300 x 1000 mm speed down:500 mm/s speed up:160 - 470 mm/s working speed:16 - 44 mm/s drawing speed:57 - 160 mm/s return capacity:32 t oil volume:1700 l power requirement:91,0 kW Dimensions (WxDxH):3,75 x 2,8 x 7,2 m height over floor:5,28 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary
pressure at min. stroke:3 t throat:150 mm stroke:- 39 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 380 mm pressure at min. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:790 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,2 t Dimensions (WxDxH):0,5 x 0,9 x 1,4 m
pressure at min. stroke:3 t throat:150 mm stroke:- 40 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 250 mm pressure at max. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:810 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,15 t Dimensions (WxDxH):0,7 x 0,8 x 1,4 m
Pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:700 x 500 mm hole in the table:250 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,5 t Dimensions (WxDxH):1,6 x 2,0 x 2,8 m overload protection in ram:mechanical
pressure:65 t distance between columns:930 mm stroke:1100 mm distance table/ram, stroke up:2400 mm table surface area:1340x700 / 930x1085 mm hole in the table:320x260 / 600x410 mm table height over floor:850 mm side window:700 mm ram surface:990 x 930 mm power requirement:15,0 kW weight:8,0 t Dimensions (WxDxH):2,8 x 2,6 x 5,2 m blank holder / ejector in ram:hydraulic side shifting device:hydraulic
Pressure:500 t distance between columns:1550 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1200 x 1300 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:150 mm die cushion area:950 x 950 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:780 mm/s working speed:105 mm/s oil volume:4000 l power requirement:263,0 kW weight:45,0 t Dimensions (WxDxH):3,3 x 3,3 x 6,1 m height over floor:6,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable
Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch
pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m
pressure:160 t distance between columns:1340 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:930 mm side window:600 mm ram surface:1300 x 900 mm speed down:367 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:15,0 t Dimensions (WxDxH):2,5 x 2,2 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary
pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
Pressure:063 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH):1,9 x 1,7 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
pressure:150 t throat:400 mm stroke:30 - 150 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1000 x 750 mm hole in the table:320 x 200 mm table height over floor:800 mm ram surface:800 x 600 mm ram adjustment:85 mm weight:10,0 t Dimensions (WxDxH):1,4 x 2,2 x 3,1 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram counterbalance:pneumatic
nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft
pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20
maximum number of results exceeded
please refine your search
1.500 € 
