die spotting press used for sale

Channel baling press with manual and automatic operation Bale length adjustable 400,600,800,1000mm Year of manufacture 1987 Machine has been overhauled by us, Master cylinder resealed Bonding 3-fold horizontal Instruction manual with electrical and hydraulic plan available, Control Siemens S 5 Filling opening 580mm w x 900 mm l Bale format 500mm w x 600 mm h

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30

Hydraulic pressure 700 bar with hand pump Auction-ID: A1-45682-22

Manufacturer: Warcom Model: Logica 100-2500 Year of Manufacture: 2023 Type of Machine : CNC Press Brake CE certified Overall working hours: 3,299 Pump working hours: 1,549 Rammer working hours: 140 Rammer strokes: 112,717 Find more here - / Contact us at -

CONTROLS   PLC SIEMENS S7 SLIDE   total force (nominal): 630 to TOOL DIMENSIONS   lower table (left-right): 900 mm   lower table (front-back): 900 mm   shut height max.: 900 mm

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Pressa a compressione DUROMEL PCVM 300T-EC Tonnellaggio: 300 Anno: 2000 Dimensioni piani riscaldati: 700 x 500 mm Apertura max stampi: 620 mm Corsa max. piano mobile: 500 mm Forza chiusura stampo (regolabile): 300 - 3000 kN Pressione d'esercizio: 235 bar Velocità compressione alla max. forza (regolabile): 0 - 3,2 mm/s Potenza piano caldo superiore: 6 kW Potenza piano caldo inferiore: 6 kW Temperatura piani caldi: 50 - 250°C Altezza piano di lavoro: 1530 mm dal pavimento (si consiglia una pedana di 400 mm con ripari) Piani di riscaldo con stampi per piatti pappa bimbo in melanina. Stampaggio a compressione di elastomeri e termoindurenti. Dotato di dichiarazione CE di conformità.

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Roller length 1820mm Roller diamter 145mm Rubber thickness 9mm Rubber hardness SHORE 50A Working plane height 910mm Max passage between rollers 120mm Forwarding speed 15,2 m/min Requested air Bar 4/8 Motor power 0,37 kW

This 3-axis SXKH HMG-300JM hydraulic press was manufactured in 2014. It features a substantial table dimension of 2200 x 1800 mm and a weight capacity of 36000 kg. The machine operates with a forward speed of up to 4200 mm/min and has a power rating of 30 kW. If you are looking to get high-quality pressing capabilities, consider the SXKH HMG-300JM machine we have for sale. Contact us for further details.

Press brake manufactured in 2005. This Ursviken Optiflex 130 3.1M features a pressing force of 1300 kN and a maximum length of 3100 mm. It includes tooling and has a weight of 14,500 kg. If you are looking to get high-quality bending capabilities, consider the Ursviken Optiflex 130 3.1M machine we have for sale. Contact us for further details.

Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details.

This 6-axis Bystronic Xpert 40/1030 hydraulic press brake was manufactured in 2016. It features a pressing force of 400 kN and a bending length of 1030 mm, ensuring efficient performance. The machine includes a maximum stroke of 200 mm and an advanced ByVision Bending control system with a 22-inch Full HD touch display. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details.

This 4-axis BEYELER RT125x3600 was manufactured in 1985. It features a pressing force of 1250 kN and a bending length of 3600 mm, providing robust capabilities for various bending applications. The machine includes a CYBELEC DNC 7000 Graphic control unit for enhanced operation. If you are looking to get high-quality bending capabilities, consider the BEYELER RT125x3600 press brake we have for sale. Contact us for further details.

This 7-axis MECOS SYNCRO 135/3000 was manufactured in 2008. It features a pressing force of 135 tons and a bending length of 3000 mm, making it suitable for various bending applications. The machine is equipped with CNC control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MECOS SYNCRO 135/3000 press brake we have for sale. Contact us for further details.

Corpus press manufactured in 2003. This PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer features workpiece dimensions with a cabinet height ranging from 300 mm to 2500 mm, a width of 300 mm to 1300 mm, and a depth of 160 mm to 700 mm. It requires a minimum room height of 3700 mm and operates at a working height of 930 mm. If you are looking to get high-quality veneer processing capabilities, consider the PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer machine we have for sale. Contact us for further details.

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45834-249

Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine.

Laminating press manufactured in 1998. This Bürkle EKMH 1300 features a working width of 1300 mm and is equipped with a new Siemens Simatik KMG Touch control system. It includes a Bürkle GLK calender, film holder, saw for trimming excess material, and two GWK temperature control units. If you are looking to get high-quality laminating capabilities, consider the Bürkle EKMH 1300 laminating press we have for sale. Contact us for further details regarding this machine.

pressure: 100 t stroke: 220 mm daylight between the columns: 1190 mm dayligth: 700 mm : 190 mm diameter of piston: 120 mm table surface area: 1600 x 800 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,9 x 1,4 x 2,0 m Side-adjustable cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread Press Fortuna Automatic A 3 H + Effective shutdown for product diversity! Head cleaning to the back Partial head reworked with stainless steel knife NEW Connection 400V, 16A-CEE plug Used machine overhauled Quality from a specialist company! Benefit from over 35 years of experience!

Roll Press Record Semi-Automatic Parting head NEWLY revised Stainless Steel Knife NEW with 3 knitting plates only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service

Roll Press Fortuna Semi-Automatic Size 4 Semi-automatic 30-piece Parting head NEWLY revised Connection 400V, 16A-CEE plug Used machine overhauled Quality from a specialist company! Benefit from over 35 years of experience!

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45834-224

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45834-136

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45833-249

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-45833-136

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45834-60

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45833-224

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45834-35

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45833-60

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-45834-316

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45833-35

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45834-26

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-45833-316

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45834-176

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45834-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-26

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45833-176

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-228

Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details.

Key data: 100 t, 3000 mm

8 Axis machine with tooling

This 5-axis TRUMPF TruBend 5170 was manufactured in 2016. It features a maximum press force of 1700 kN and a stroke length of 445 mm, making it suitable for various bending applications. The machine has a weight of 12,200 kg and operates at a maximum pressure of 300 bar. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5170 press brake we have for sale. Contact us for further details.

Cleaning trolley with plastic press

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power