die spotting press used for sale

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 600 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 2,250 kg Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...

Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible.

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Technical specifications: Equipment: STV 1200 press station Year of construction: 2009 Dimensions (length x height x width): 3,660 x 1,165 x 1,561 mm Bjbsw S E N Hsqkhkgbeww Pressing force: 320 kN Filling opening: 1,180 x 1,405 mm Pressure piston height: 600 mm Extension piston width: 1,405 mm Pressure clamping depth: 600 mm Power: 11 kW; The station features a Schott Systema+ hydraulic tank hook system! New painted Containers x 2: Capacity - 30 m3 Year of construction - 2009 New painted Press station is in good condition! 1. Taran, reprimed/painted 2. Hydraulic cylinders, all reassembled/restored 3. New hydraulic components, hydraulic hoses, hydraulic hoses 4. The automatic wardrobe has been re-selected Presstation we sale with or without BOX ! PREIS ON REQUEST!

Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high

Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Pressure comparison test pump Leitenberger BT 400 DM Test pressure source for exact testing, adjustment and calibration pressure gauges, pressure switches and pressure sensors. Manufacturer: Druck & Temperatur, Leitenberger GmbH Model: BT400 DM (digital version) Pressure range: up to 400 bar (hydraulic) For testing and calibrating pressure gauges. Integrated precision digital reference pressure gauge. Precision pressure gauge for visual control. Two test specimen connections for two pressure gauges. Medium: Hydraulic oil or water (depending on the seal kit). How it works: Manual screw pump for pressure generation, the generated test pressure can be calculated with the integrated volume variator sensitively. Application examples & areas of application: Test pressure source for calibration purposes, pressure comparison test pump, pressure comparison test bench, pressur ...

Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer

Dismantled / disassembled by the sellerACEC, 9.0 kW, 380 V, 3~50 Hz, 970 rpm380 V, 3-phase, 50 Hz

200941,789 h864,086 strokes4,550 mm2,300 kN (230 t)Cybelec ModEva 10S23,400 kg400 l3 x 400 V / 50 Hz AC24 V37 kVA80 A06/2026Various punches and dies

Key data: 22 mm, 900 , 850

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

SEFA Pneumatic Large Format Press SLIDE-1285, Transfer Area 125 x 85 cm Bought at the beginning of 2021 - works perfectly - hardly used and in very good condition There is still a 5-year warranty on the heating element! Pneumatic Large Format Heat Press Pull-Out Worktop Extremely accurate temperature control +/- 1° thanks to multi-zone measurement technology Large touchscreen display 4 press programs can be stored, production counter - Transfer area 125 x 85 cm, for grouting of slabs up to a size of 120 x 80 cm - Digital time control 0 – 1,800 seconds - Digital temperature control 0-230°C - Contact pressure up to 386 g/cm² - Maximum material thickness 50 mm - Connection data: 12 KW, 400 VAC 3-phase, 20 A - Dimensions press: (WxHxD) 1286 x 794 x 2153 mm - Weight 419 kg The machine needs high-voltage current! Without guarantee and war ...

Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible.

pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Schuler C-frame eccentric press is offered. Press force: 80t, throat depth: 280mm, adjustable stroke range: 20mm-160mm, max. stroke rate: 125strokes/min, table area X/Y: 700mm/560mm, slide area X/Y: 560mm/350mm, slide adjustment: 72mm, max. distance between table and slide: 510mm. Machine weight: approx. 4800kg. Inspection possible by appointment.

Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible.

Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement.

A single-column eccentric press is offered. Press force: 25t, throat depth: 200mm, adjustable stroke range: 8mm-80mm, maximum stroke rate: 180strokes/min, table area X/Y: 560mm/400mm, ram area X/Y: 355mm/220mm, ram adjustment: 50mm, maximum shut height: 320mm. Machine weight: approx. 2150kg. Inspection by appointment is possible.

COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

Used Used Pet preform presses Engel: Year: 2004 Condition: As Is Model: MacPET 4550-320 maszyna Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com

Used Used pet preform presses Husky: Year: 2010 Condition: As Is Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs; preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com

Clicker Press GSB-2C Manufacturer: USM Bed size 1m wide x 500mm deep Head size: 360mm wide x 500mm deep

various book presses, in good condition, immediately available

COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm

Main characteristics: • Overall dimensions: LxWxH: 1200mm. x 650mm. x 1950mm.; • Designed for shaping sausages in the drying process; • Mobile performance: movement through 6 polyamide wheels; • The pressure on the product is exerted by pneumatic cylinders located at the top of the machine; • Determination of the pressure on the product is carried out by adjusting the pressure of the compressed air supplied to the cylinders; • Capacity: 250-320 kg. depending on the caliber of the product; • Compressed air connection: 1/2" (quick connection with spiral hose); • Pressure 5 to 6 bar; • The machine works with polyethylene countertops with dimensions: 1000mm. x 660mm. x 12mm.; Options /not included in the price/: • Polyethylene hob with dimensions of 1000mm. x 660mm. x 12mm. – 117,00 BGN/pc. excluding VAT (the press collects between 20 and 25 plates, a mult ...

TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100 V 5 Factory overhauled by the manufacturer in 2024 Technical data: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal Gear Pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: with a bulk density of 30 kg/m³ approx. 10.0 t/h with a bulk density of 50 kg/m³ approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central l ...

Technical data for the press: Manufacturer Strautmann Umwelttechnik GmbH Type BaleTainer Year of construction 2014 Operating hours 14,947 hours Number of bales pressed: 5,174 pieces Press force main press 60 t Area pressing capacity 156 t/m² Dimensions of the insertion shaft 2,815 x 1,085 x 2,250 mm (L x W x H) Bale dimensions 1,100 x 1,100 x 700 mm (W x D x H) Drive power 5.5 kW Total connected load 13 kW Fuse 32 A, connector CEE 32 A Bonding 4-fold vertical, fully automatic Bale weights up to 400 kg, depending on material Hydraulic oil tank volume 90 L PLC control Siemens S7-1200 Control panel Siemens Simatic Touch Panel Press dimensions assembled 6,415 x 2,056 x 2,758 mm (L x W x H) Machine weight press approx. 7.5 t Scope of delivery: BaleTainer press incl. tilting device and bale chute. A megaliner with an effective interior height of at least 2.9 m is requi ...

Specifications Bag dimensions: 1m3 Year of Make: 1999-2000 Weight of the bag: do 500 kg Productivity: 500 kg/h Power connection: 400V/2.2 kW

used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2020 Machine was only in operation for about 6 months and was removed from the plant in 2022. Technical data: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 45 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 2.5 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 4.2 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 10.3 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Photos will be added at short notice.

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

In the pipeline HSM baler, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of Make: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

Key data: 22 t, 900 mm, 850 mm

Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.

Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible.

Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.

Key data: 22 t, 900 mm, 850 mm

Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible.

Press brake manufactured in 2018. This IBETAMAC 3200 100T features a pressing force of 100 t and a bending length of 3,200 mm. It includes controlled axes for X and Y, along with safety equipment such as additional side safety lasers. The machine is practically unused, fully functional, and available for testing. If you are looking to get high-quality bending capabilities, consider the IBETAMAC 3200 100T machine we have for sale. Contact us for further details.

Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details.

Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg

Press brake manufactured in 2001. This IMAL SMALL 835/25 features a press force of 25 tonnes and a bending length of 835 mm. It is equipped with Delem DM51 CNC control for enhanced precision. If you are looking to get high-quality bending capabilities, consider the IMAL SMALL 835/25 machine we have for sale. Contact us for further details.

Press brake manufactured in 2019. This Vimercati PHSY 30X1250 features a pressing force of 30 tons and a bending length of 1,250 mm. It includes an X-axis travel of 400 mm and an R-axis travel of 130 mm. If you are looking to get high-quality bending capabilities, consider the Vimercati PHSY 30X1250 machine we have for sale. Contact us for further details.